Dancing classes become fruitful in the presence of a specially equipped room. To do this, sometimes it’s enough to just install a choreographic machine, which consists of a railing, racks and brackets that can be mounted both on the floor and on the walls. With it, it is convenient to practice exercises and dance elements. Regular exercises can improve stretching, flexibility, coordination of movements.
Mobile construction
Currently, you can install a mobile choreographic machine or use a stationary device. Handheld devices are in demand in Western countries. On such machines it is convenient to engage both beginners and dancers with experience.
Thanks to an advanced adjustment system, the mobile choreographic machine can be fixed in a static position on almost any uneven surface. It is enough to put the fasteners in the desired position.
To adjust the position for training people of different stature, just a little twist the choreographic machine. The height of the mobile structure is adjustable thanks to the movable threaded connections.
If there is a need for transportation, dismantling the machine and reinstalling it in a new place is not difficult.
Stationary choreographic machine
Stationary constructions for choreography have their advantages. The main advantage is the availability of additional stable brackets and supports. Therefore, during operation, a stationary choreographic machine is more reliable.
However, such structures must be installed on smooth surfaces, which creates some inconvenience in the presence of a deformed floor or wall covering. Therefore, it is recommended to purchase a stationary choreographic machine if there is a constant spacious room with high-quality finish.
Single-level machine
Sibling designs are common in ballet schools. They are distinguished by their low weight, as well as the special ease of assembly. If necessary, they allow you to adjust the height of the crossbar for alternating occupation of individual age groups.
The following sizes are considered to be the standard for single-level choreographic machines:
- the interval between the individual racks is 2 m;
- height - 1.1 m;
- diameter of racks - 38 mm;
- the diameter of the handrail is 50 mm.
Two-row choreographic machine
The presence of several rows of crossbars is caused by the need for simultaneous occupations of people of different height and age. Children can safely hold onto the lower handrail, while adult dancers can hold onto the upper handrail.
Two-row choreographic machine sizes may have the following:
- height of the upper handrail - 1100 mm;
- height of the lower crossbar - 750 mm;
- handrail diameter - 50 mm (metal) or 40 mm (wooden);
- diameter of racks - 38 mm;
- wall mount - pipe with a diameter of 25 mm.
Materials of manufacture
Ballet choreographic machines can have wooden or metal handrails. Softwood crossbeams are resistant to moisture and moderate mechanical stress. Effective for classes of younger age groups in specialized classes. Suitable for use at home, are affordable and low cost.
Professional machines, portable and stationary choreographic models most often have handrails made of precious woods - oak or beech. Such materials are excellent at significant high-intensity loads. Such crossbars are installed on choreographic machines in sports clubs and studios for practicing experienced dancers of the adult age category.
Some machines have chrome steel handrails. They rarely resort to this option, for which there are several reasons. After compulsory airing of the hall between separate classes, the metal quickly cools and remains so for a long time. Such a property makes dancers feel a certain discomfort.
Unlike wooden rungs, metal ones do not absorb and do not evaporate moisture, which remains on the surface in contact with hands. Steel products quickly become slippery, which can upset the dancer's balance and result in personal injury. Therefore, chrome-plated material is more often used for the manufacture of racks, and is also used as a decorative solution in the design of halls.
Mounting Features
Portable choreographic machines are installed on stable supports. You can place them on any horizontal surface, and if necessary, move them to another place.
Stationary models are attached to the ceiling, walls, or both. The latter solution is particularly reliable, but it is not possible in all cases. For example, if the hall has an expensive finish of walls and floors, where it is undesirable to make extra holes, preference should be given to structures with ceiling mounts.
For reliable installation of a choreographic machine, a number of conditions are required:
- The length of the structure should be at least a meter. There is no limit and it depends on the parameters of the room, the amount of free space.
- It is not recommended to install racks longer than two meters, since over time they can become deformed and bend under intense loads.
- Before installation, the specialist must determine the optimal location and the most reliable way of fixing the structure for choreography.
Which choreographic machine is best for home?
This question is difficult to answer unambiguously, as individual dancers have different needs. If one family member plans to deal with, it is better to incline to the choice of a single-row model of a stationary or mobile type. A two-row design will be much more convenient for several people of different ages.
Since children grow up simply in front of their eyes, an ideal option would be a product with telescopic retractable racks, which will allow you to easily expose the handrails to the required height.
Selection tips
Choosing a choreographic machine for classes at home or installation in the dance hall, it is worth focusing on several important points:
- Even with a particularly limited budget, preference should be given to wooden beams, since metal surfaces are not very practical and, moreover, they quickly become rusty as they are used.
- Depending on personal needs and hall parameters, you can choose a structure from 1 m long to infinity.
- For practicing folk dances, where there is a significant load on the handrails, it is recommended to purchase additional fastenings together with the choreographic machine, which will provide reinforcement of the structure.
- Before buying a specific model, it is worth making measurements of the hall in order to determine in advance the optimal method of attachment and choose the position of the future projectile.
- If the existing conditions do not allow fixing the machine at the request of the owner, you should agree on alternative options with the master who will be engaged in the installation.
- The service life of choreographic structures largely depends on the nature of the operation. It is forbidden to sit on machines, to independently unwind fastenings, to mount and dismantle without appropriate skills.
Eventually
Initially, it is recommended to purchase high-quality choreographic machines from reputable manufacturers. Only in this case can we count on the possibility of efficient operation of the device for decades. The main thing is that training on a properly selected reliable machine will bring pleasure and benefit.