How to change a light bulb in a stretch ceiling: execution technique, necessary tools, step-by-step instructions and tips

Stretch ceilings can often be found in modern homes. This coating is easy to use, easy to care for. The only question that interests its owners is how to change a light bulb in a stretch ceiling. To do this, you need to know what types of light bulbs are, and also have in the arsenal all the necessary tools for the job. We will talk about this today.

Reasons for replacing a light bulb in a stretch ceiling

Modern designers unanimously believe that the stretch ceiling is one of the best inventions. It not only refreshes the room, but also serves as a decoration of the room. The advantage of this type of ceiling coating is a wide variety of lamps suitable for it. You can hang a classic chandelier, or you can stop on a fashionable LED strip. Some people choose “scattered” in a chaotic manner fixtures of different sizes. The shapes of the lighting fixtures may vary.

Stretch ceiling is a modern design solution that can decorate any interior. When choosing lighting, there is a lot of room for imagination - from a chandelier, LED strip to spotlights of different sizes and shapes.

The need to replace bulbs in a stretch ceiling is determined by several factors:

1. The lamp may break. Most often, cheap lighting fixtures fail. Therefore, it is better to spend money on a high-quality lamp once than to buy it every three months. If the device is reliable, then it will not have to be changed often.
2. When the design of the room changes, you have to dismantle past lighting fixtures. To save on new bulbs, you can purchase special pads that are installed on spotlights. They change the appearance of lighting devices. If a chandelier hangs in the room, then there is the possibility of "playing" with shades. They can be replaced with new ones or decorate old ones.
3. When the stretch ceiling is completely changed, the lamps built into it will inevitably change. Some mistakenly believe that you can leave the lamp, while dragging the ceilings. This is impossible, since the suspended ceiling is a complete system, and the luminaires are built into it.

How to change bulbs in a stretch ceiling?

The solution to this problem is very important for those who started repairs. If the question arises, how to replace a light bulb in a stretch ceiling, then you need to ask what are the rules for dismantling lamps. It is necessary to find out what types of fixtures exist, and how to handle each of them. With the right approach, you can do without installation errors.

How to replace a halogen lamp?

When people are interested in how to change bulbs in a stretch ceiling, not everyone understands which lamp suits him. When it turns out that halogen lamps are needed, then everything falls into place. Nowadays, this type of lighting is considered one of the best among the many acceptable options. Due to the high power, the light from such a lamp is considered very bright, but they quickly fail. When it becomes necessary to replace the device, you must follow the instructions:

1. It is necessary to turn off the electricity in the house.
2. In preparation for work, you need to wear cotton gloves. It is worth remembering that the halogen mechanism case has a high temperature. Do not touch the light bulb without special gloves.
3. After completing the preparatory work, you can unscrew the old light bulb. Gloves should be used when working.
4. Fixes are removed, and the light bulb changes from the old to the new.
5. The new light fixture needs to be fixed with fixtures.
6. The housing of this type of lamp should be no further than ten centimeters from the ceiling.

LED option

How to change the LED lamp in a stretch ceiling? It is believed that it is most beneficial to install LEDs, since they consume little electricity. They also have a long service life. Such lamps are convenient and profitable, because they do not require large expenses.

When the “tablet” burns out, people ask how to change the LED light in the stretch ceiling. This process does not take much time and effort, you just need to adhere to a certain algorithm of actions:

1. It is necessary to turn off the electricity in the apartment.
2. Do not forget about the additional light source, especially in the evening. The flashlight will not be superfluous when working on replacing the lamp.
3. First of all, the mounts from the previous lamp are removed.
4. It is necessary to remove the insulation from the wiring.
5. Carefully disconnect the required wires.
6. You must first study the instructions that came with the new lamp.
7. A new LED lamp is installed in place of the old one.
8. Attach the necessary wires and secure a new light source. For this, special screws are taken.

According to stores, most people purchase LED lamps for installation in suspended ceilings. Demand for them is constantly growing.

How to change the spotlight?

Before changing a light bulb in a stretch ceiling, you need to understand what type it belongs to. If it is necessary to replace the spotlight, painstaking work remains. It requires some training in installing the type of lamp you are looking for. To successfully complete the replacement, you should:

1. Unscrew the box, disconnect all the wires, then you can get the old lamp.
2. Before installing a new device, you need to disassemble the box. First you need to disconnect the wires that match in color.
3. It is better to prepare special pliers in advance that help cover the wires with caps.
4. When it was possible to place all the wires in the box according to the instructions, then you can proceed with the installation of bulbs.
5. Often, before changing a light bulb in a spot of a stretch ceiling, people do not look at the power of a new device. It is important that it is not larger than indicated in the instructions. The lamp needs to be firmly fixed.
6. When the work is completed, you need to turn on the voltage switch.

What safety measures should be observed when replacing a spotlight with a new one?

Observe safety precautions when working with spotlights. It is important to turn off the electricity before starting the lamp replacement work. In order not to spoil the ceiling and not damage your own fingers, the lamp needs to be taken only by the springs. In this case, unscrewing the spotlight from its past location will be quite simple.

Why can not I cut the ceiling around the lamp when replacing it?

Often people think that before changing a light bulb in a stretch ceiling, you can cut the canvas around the lamp. Few people know that such actions are dangerous to human health and life. After such work, the ceiling will be almost impossible to repair. If you mix up and accidentally touch another wire, you can get a strong electric shock.

If you cut the canvas, you will need a lamp of a larger diameter, and the size of the spotlights initially involves small appliances. When the lighting fixture is under warranty, the warranty is automatically voided if the replacement is incorrect.

With the wrong approach to this type of work, it is easy to spoil the entire stretch ceiling and you will have to do a new one. If a person is not sure that he will be able to do the job efficiently, it is better to offer a professional electrician to change the light bulb in the suspended ceiling.

How to remove an old chandelier from a stretch ceiling?

Often there are such lamps that cannot be changed if you do not remove the chandelier from the ceiling. To make a replacement, you need:

1. Remove the chandelier from the hook and then gradually disconnect all the wires.
2. When the chandelier has a cross-shaped plank, then it will be more problematic to remove it. The first step is to separate the lights from the ceiling and decorative elements. After that, it is permissible to disconnect the fasteners and wires.
3. It is worth remembering that with suspended ceilings in an apartment it is better not to purchase flat chandeliers that are installed horizontally to the ceiling. If they have incandescent lamps, the ceiling coating may melt. Then you have to change all the stretch ceilings.

Expert Advice

Before you remove the light bulb on the suspended ceiling, it is worth checking whether the electricity in the apartment is turned off. If there are mirror elements in the ceiling, then change the lamps with extreme caution.

To ensure uniform lighting throughout the room, it is better to choose lamps with the same power. Such measures will increase the lamp life. All work should only be carried out with gloves.

Do not chase the high power of the fixtures. For stretch ceilings, the optimal option would be a power of 35 watts.