First of all, in the review that is brought to your attention, the Beeline modem setting will be described. His model is ZTE MF823D. Also, a delivery list of this device will be given and its cost will be given. The information set forth below will allow an inexperienced computer user to independently connect the ZTE MF823D, configure it, and begin to actively use this element.
Wireless Communication Device List
The configuration of the modem in question includes the following basic elements:
- Device.
- Starter pack.
- The operation manual, which stepwise and in detail sets out how to configure the modem of this model.
- Warranty card.
The delivery list of the device in question is sufficient. That is, the user immediately after its acquisition can begin to actively exploit it.
Options
Before the configuration of the Beeline modem is described in stages, we will consider the technical specifications of this information transfer system. This device has the following characteristics:
- An external modem with support for all existing cellular standards.
- The interface for connecting to a personal computer is USB.
- The peak speed of receiving information is 150 Mbit / s, and sending - 50 Mbit / s.
- The format of the SIM card is miniSIM.
- It is possible to install an additional drive in the corresponding expansion slot.
Setting up the Beeline modem of this model is a simple operation and the level of its complexity is minimized by the developers. There is no need to download additional software from the Internet in this situation. All the necessary software for the operation of the device in question is recorded on the built-in drive. After the purchase, the user receives everything necessary to use such a switching system.
Due to the presence of an additional slot, this modem can also be turned into a flash drive. To do this, just insert a microSD card into it. The maximum size of the latter can be 32 GB. This modem model cannot technically address the larger drive size.
Order of setting. Main steps
Configuring the Beeline USB modem of the ZTE MF823D model is implemented as follows:
- We take it out of the package.
- Carefully dismantle the lower part of the case and release the SIM card slot.
- Unpack the starter pack. We remove the SIM card and install it in the slot that was released in the previous step.
- We assemble the modem case back.
- At the next stage, we connect the network device to the port of the personal computer.
- Turn on the PC and wait for the end of its download. At the same time, a message appears requesting the installation of control software. Next, follow the instructions of the computer automatic tuning system and install the driver. Also, an additional control program from Beeline is installed.
- Then it is recommended to restart the personal computer.
- After that, we open the management utility from the mobile operator. In this case, a request will appear regarding account activation. We confirm the completion of this operation.
- At the final stage in the utility menu, activate the transfer of information.
Testing
The next step in how to configure the modem is testing the transmission of information from the cellular network. To do this, it is imperative to launch any available browser on the computer to which the modem in question is connected. In his address bar, we type any search query. Then confirm it. To do this, just press Enter once. After performing this manipulation, the requested information should open. If this does not happen, then you need to check the balance and settings of the Internet access point. If necessary, you can make a call from the phone to the operator and consult on how to resolve this issue.
Kit cost and owner reviews
Really simple and intuitive is in this case access control. The Beeline modem of this modification can be purchased for 2590 rubles. Moreover, this amount includes not only the network device and the starter pack, but also traffic from the Global Web. The size of the latter is 32 GB. In most cases, this amount of traffic is enough. That is, the first month of operation is already included in the price of this kit.
The monthly subscription fee in the future will be 650 rubles. Again, the limit on the transfer of information and data will be limited to all the same 32 GB. The owners of this modification characterize it as a reliable and affordable device - these are the main advantages. The drawback is that this is only one - it is tied only to the equipment of one operator.
Conclusion
In this article, the configuration of the Beeline modem marked ZTE MF823D was considered. But the algorithm given above is universal. Therefore, it can be applied to other similar devices of this operator.
The very algorithm for initializing such an access point to the global web is very simple. Therefore, even a novice computer specialist will cope with it perfectly.