If you want to make a flower box with your own hands, you must first make sure that all the necessary materials and tools are available. Of course, wood is a suitable solution. You can choose the size and shape yourself, these parameters will depend not only on your preferences, but also on the location of the structure.
Preparation of materials and tools
In order to make a flower box with your own hands, you will need an electric jigsaw, a plane, a grinder, a hammer, a square, a screwdriver, a tape measure, as well as tongs. For lack of a jigsaw you can use a saw. However, the work in this case will be somewhat more complicated, and the process itself will be longer. The design is selected depending on the availability of appropriate equipment, if you have to work manually, it will be easiest to make a simple rectangular or square box. Whereas if an electric tool is available, then this allows you to make any designs. Do-it-yourself flower box can be made from pieces of OSB, plywood sheet, as well as various slats and boards. The thickness of the latter should be equal to 10 millimeters or more. In order to treat the surface and protect the material from the negative effects of insects and microorganisms, an antiseptic composition should be prepared. Wood will look more attractive if it is treated with a stain, but any other coloring composition will do. Parts can be fixed using self-tapping screws, nails or glue. Quite often, masters use two fastening methods at once.
Manufacturing technology for a flower box
If you decide to make a flower box with your own hands, then at the first stage you need to use boards whose width is 20 cm. Of these, you will need to cut blanks, these will be three long elements that will go to the sides and bottom. Whereas the other two will be used for the ends. The latter should be made somewhat wider than the bottom. The difference will be the thickness of the sidewalls. Details must be processed with a planer, and then with large emery paper. Holes should be drilled at the edges, 4 must be placed in the end blanks, while the other three in the side.
Design assembly features
When you make balcony flower boxes with your own hands, then when assembling the sides and the bottom, you need to use screws with a length of 50 millimeters. Only then can you start installing the end parts. After the flower container is assembled, its surface can be sanded using a small skin for carrying out these manipulations. A wooden box must be impregnated at the last stage with an antiseptic composition, one should not forget about one side, while on the outside the product can be covered with a stain, enamel or varnish is also perfect for these purposes.
Making a flower box from pallets
Do-it-yourself balcony flower boxes can be made from pallets. To do this, the old stand needs to be disassembled into separate parts, the trims should be carefully pry off with a nail clipper. As for the fasteners, they must be removed with forceps. If damaged or rotten slats are available, they must be removed. As a rule, about ten suitable boards remain from such products. The wood will need to be cut to the required dimensions, then cleaned with an abrasive skin. In the next step, you can assemble the upper frame and the lower base. Two parts must be fastened with side panels; nails should be used for this. Decorative strips will mask the joints. Now the master can begin decorating with the help of paints and varnishes.
Designer Recommendations
If you decide to make such a wooden box for flowers with your own hands, then the outer surface can be decorated using wood saw cuts. It can be thick branches or planks that look like a picket fence. In the lower part you need to strengthen the legs, which should be made of bars. This will ensure the ventilation and preservation of wood in good condition.
Flowers inside should be placed in plastic pots, but as an alternative solution, planting plants directly in the box itself can be used. First, you need to lay the film on the bottom, making drainage holes in it.
Alternative manufacturing case
Before you make a flower box with your own hands, the master must carefully approach the issue of choosing a material. As it can be used a floorboard, the width of which is 10 cm. For the work you will need the same set of materials. Choosing the height of the container, you may prefer a parameter equal to 40 centimeters. After the boards are interconnected, bars can be installed in the corners. If you intend to plant climbing plants in such boxes, then it is necessary to provide supports for them. To do this, cut out of narrow bars, and then knock down the grate, which should be fixed to the already finished box on the inside.
Conclusion
Those craftsmen who want to make flower boxes with their own hands from wood need to think through every nuance, especially with regard to the durability of the design. If low-quality dried wood is used, then after a while the structure will change its initial linear dimensions. That is why it is important not only to comply with the technology of work, but also to choose good material. For the test, you can use as a material everything that you can find in your garage or barn. From old household products, too, something very interesting can turn out. However, you need to take care of the comfort of plants.