Blacksmith's paint is a special enamel or coloring composition used for metal forged elements that are ubiquitous. These are the details of the garden exterior (fences, staircases, gratings on windows and gates) and the products used in the interior (coasters, fireplaces, furniture and decorative elements).
Paint Features
Such compositions provide protection forged products from corrosion. The most widespread liquid plastic is "Nerzhaplast" and the decorative composition "Moloteks", which has a hammer effect.
Forge paints "Patina" allow not to doubt their quality. They are distributed on surfaces previously cleared of existing rust, salts and fat deposits. The composition contains special additives, due to which the physical and operational characteristics are significantly increased.
Forge paint "Prestige" is used for finishing products manufactured by casting, stamping and forging of non-ferrous metals, steel, metal and cast iron, the operation of which is expected both inside and outside the premises, subject to significant temperature extremes and high humidity. It is also possible to use for decorative coating of concrete and wooden elements.
Blacksmith's black graphite paint is always popular. The secret to this demand lies in its wide application possibilities and excellent covering characteristics. Graphite shine is the perfect base for any patina tone.
Shades
Coatings made from acrylic binders can be used without pre-treatment of the planes. Using them, it is possible to create a metallic effect, as well as a dull or rough surface. Gold and silver shades are most often used for artificial aging of objects. But they are not limited to the choice; there is the possibility of creating purple, blue or bronze elements.
Forge paints are distinguished by the presence of plate additives, which provide protection against negative influences and create excellent adhesion to prepared surfaces.
Benefits
Using such means, in addition to corrosion protection, it is possible to apply to structures that have a complicated profile. Dimensional elements are no exception.
Among the advantages of such compounds, it is worth noting the following:
- wide textured assortment - antique, hammer, glossy and others;
- distinctive decorative features;
- low material consumption;
- a sufficient degree of adhesion with metal structures and elements;
- lack of need for specialized equipment for quick drying;
- use, transportation and storage at subzero temperatures;
- anticorrosive protection.
Blacksmith's paint: application
Before use, thorough mixing and shaking of the mass is required. Application is made in several layers, each of which is dried for 2-3 hours. The quality of the final coating is influenced by many conditions, including ambient temperature, solidification conditions, layer thickness.
Blacksmith paints are applied using several methods, it can be pneumatic or airless spraying, the use of standard methods in the form of a brush and a roller. Of particular importance is the preparation of the surface before work. It must be pre-fat-free and dried, while the optimal indicator of ambient humidity is 75-80%.
The strip method of applying with a standard brush is optimal for seams, edges, places with difficult access and bumps. It takes at least 24 hours to fully dry if the ambient temperature is about 20 degrees. At other values, as well as depending on the quality of the composition, the pour time can vary. That is why it is advisable to purchase coatings in trusted specialized stores.
Storage and Security
Blacksmith's paint is characterized by the presence of organic volatile solvents. Working with it requires compliance with established rules and regulations. During application, it is recommended to be outdoors or to turn on forced ventilation. After complete solidification, the enamel film is fireproof and has no effect on the human body.
After finishing work, if there are any remaining paint, they should be in a closed container. Used rags, waste and spoiled materials are disposed of in non-combustible containers in designated areas.
Transportation and storage are possible at a temperature range from +30 to - 45 ° C, in the absence of direct exposure to sunlight and the proximity of heating devices.