Chevrolet-Cobalt, the tuning of which is described in this article, is considered a fairly popular vehicle. Motorists have the opportunity to improve the performance of the car without spending money on visiting a car service.
Model description
“Cobalt” is a type of modern family-style sedan. The characteristics of the Chevrolet-Cobalt are quite high at an affordable cost. A car is characterized by high engine power with a relatively large size, when compared with other representatives of sedans.
But sometimes the owners indicate that the car requires the improvement of headlights, rear fenders. The quality of the plastic also raises questions. Such disadvantages can be eliminated by tuning.
Soundproofing
Tuning "Chevrolet-Cobalt" may consist in installing insulation against noise. To do this, you need to disassemble the trunk of the car. Change the standard sound insulation - bare arches without pieces of vibration isolation. The car interior must also be disassembled and degreased. This car requires additional sound insulation. This process is described below.
Tuning "Chevrolet-Cobalt" in the form of gluing insulation against noise starts from the top - from the roof. After gluing all the bands of vibration materials, you can put the roof in place. For the best contact with the metal, press the material. He is laid with a continuous carpet throughout the cabin, sealed with their trunk. Arches require reinforced sizing, as this is the noisiest place. The material must be preheated and rolled with a roller. The same should be done with the floor in the trunk. Now the car will be with a more comfortable interior, less noise will be heard in it.
After sizing the arches and wings, you can proceed with the assembly of the cabin. All plastic must be installed in their regular places so that there are no traces of the work performed.
Pad replacement
Tuning "Chevrolet-Cobalt" may consist in the replacement of factory pads. To do this, experts recommend removing the wheels, unscrew them and use a brush to remove dust without touching the rubber parts. With a key of 14, you need to unscrew and raise the arc, carefully remove the pads. Be sure to remember their location, so that at the end of the work everything is returned to their places. Also, everything must be brushed.
New pads must be unpacked and study the installation instructions. Before installation, use oil lubrication. Pads should be placed with an internal bracket up, bending them with a screwdriver.
Check the quality of work as follows: lean with a screwdriver and move the piston back. If the car has a high mileage, it is better to pull out the bushings and treat them with new grease.
After changing the pads, it is necessary to press the brake pedal several times so that the brake drum comes out and falls into place. Otherwise, after the start of movement, the machine will not brake. This recommendation is binding.
Having twisted back a wheel, it remains to establish wheels. Such work can actually be done independently using Chevrolet-Cobalt spare parts and without spending money on car service.
Chip tuning
You can improve the operation of the Chevrolet-Cobalt 2014 engine. Standard factory firmware can be replaced. It can be downloaded from the online database and reprogrammed by the control unit, wait for the recording to finish and check the car in business.
Pad on the lock
The characteristics of the Chevrolet-Cobalt indicate that the car is not very high quality plastic. It scratches quickly, especially in the area of the ignition. Therefore, it makes sense to immediately install the lining on the ignition.
For this purpose, you need to take a tool for degreasing the surface - ethyl alcohol may come up. Prepare the pad of the desired color to your taste. All the backlight of the car is blue, so you can effectively combine lining with it. It is important to determine its position for installation.
Turn the key to prepare the machine to start. The trim must not interfere with the key in the ignition switch. The rest of the work is not difficult. They can be performed without a key. The pad is glued to the tape. For maximum reliability, it is important to degrease the surface first. If there is no alcohol, a glass cleaner or even just wet wipes will do. It is necessary to give the alcohol time so that it evaporates, and proceed to the sticker on the lining.
Finally
Tuning "Chevrolet-Cobalt", the photo of which is provided in the article, allows you to eliminate some of the shortcomings that are inherent in this family-type sedan. The article describes the process of replacing noise insulation, brake pads, locks. Such work does not require a lot of time and money. You can do them yourself without resorting to the services of a car service. With a careful study of the recommendations, tuning the car will bring the desired results, and the vehicle will show its maximum capabilities.