Alarm "Starline A9" is very popular among drivers of different cars. The delivery system includes detailed instructions. It allows you to connect and configure the alarm. The manual also spells out the principles of operating the system. After studying user reviews and the provisions of the instructions, we can identify the basic principles of working with "Starline A9". Keychain programming will be a simple task. Tips from experienced car enthusiasts make tuning fast. This will make it possible to use all the options. The alarm can be configured to work in autorun mode or without it. The lock function is also configured.
General information
"Starline A9", the operating manual of which requires study before starting the installation of the system and programming the key fob, is an alarm system with remote engine start. It has a two-way communication channel. Its range of action on the terrain without obstacles is 600 m. In the pager mode, this indicator increases by 2 times.
Radio coding is dynamic. The selection of control commands is carried out according to the cursor principle. Each team is controlled by its own button. It is displayed on the key fob display. The system provides sound and vibration alerts.
In addition to the basic data on the state of the car, the keychain shows the user time, temperature in the cabin, as well as an alarm clock.
You can install the presented system on cars with a diesel, gasoline or turbocharged engine type. The gearbox can be automatic or manual.
Safety regulations
Using the functions of remote or automatic engine start, control of machine components, it is necessary to follow safety measures for using the Starline A9 system. The operating instructions clearly indicate them.
It is important to park your car in a well-visible area. At the same time, it must be installed on the parking brake. The automatic transmission lever should be in the PARK position, and the manual transmission should be in neutral.
You can not start the engine in the absence of a driver in the cabin if someone is in front of or behind the car. The keychain must not be given to children or persons who do not know how to operate this device. The machine must be in good condition, there must be a sufficient amount of all consumables and fuel in its system.
Key fob
The embedded alarm functions are carried out automatically or by means of the key fob signals. Some of them can be changed. The procedure is described in the instructions for the Starline A9 system. Keychain programming is simple. For this, the device has three buttons. Information is displayed on the liquid crystal display.
Driving a car can be performed using one or more key fobs. If you lose the main device with a screen, you can use the spare remote control. This is a keychain with buttons that does not have the function of providing information to the user. With it, you can control almost all the functions of the system.
If the car owners use several key fobs with a display, then all information about the state of the car’s systems and alarms will be displayed on the screen of the device from which the command was issued.
Button Assignment
Setting up the Starline A9 keychain with a liquid crystal display is done using three buttons on the case. Their combinations make it possible to control the functions of the system.
Button I can turn on a programming command if it is quickly pressed once. Holding it for 3 seconds, the driver remotely starts or stops the engine. The user can enable the security mode. To do this, while the engine is running, I also hold this button for 3 seconds.
Button II with a short press sets the cursor position on the screen. If you hold it for 3 seconds, the trunk will open.
Button III also allows you to control the cursor position with a short press. It interrupts the keyfob alerts. To do this, it is kept pressed for 0.5 seconds. To turn on or off the clock, alarm, energy saving settings, this button is held for 3 seconds. If you hold it pressed for 6 seconds, you can enter the programming mode of button I.
Pictures on display
All information about the state of the car and the alarm itself can be viewed on the display of the Starline A9 system. The icons on the remote control will help you navigate in the settings and control modes. The instructions clearly state which picture corresponds to a particular function.
Indication of commands and modes is displayed at the bottom of the screen. You can list it from left to right for a general idea of the functions of the device. To fully understand the purpose of each of them, you need to carefully study the instructions.
The first picture, which is on the left, corresponds to the anti-robbery mode. If it is on the display, this command is enabled. Next is the function of the additional channel 3. Moving to the right, you can see the autostart mode of the motor in terms of temperature. Next is the function of daily startup or engine start on an alarm clock. This picture is followed by a remote on or off motor.
After that, silent protection modes follow. In this case , confirmation beeps do not work. The following picture corresponds to the guard function with an audible signal. Behind it is a shutdown at a distance of the shock sensor.
A little to the right is the Valet service mode picture. It is followed by a picture showing the status of the vehicle systems and cabin temperature indicators. Further there is an additional channel 2. The trunk opening remote completes the picture chain.
I button
The I button on the main remote is user-programmable. This can be done an unlimited number of times. Most often it is used to disable or enable the security mode in the Starline A9 system. Programming a new keychain is simple.
Use button III to move the cursor on the screen. When the desired mode is selected, for example, the inclusion of the security function or any other, the movement is stopped. Button III is held for 6 seconds. Two beeps will sound first. Then another 3. Then I button is pressed to activate the selected function.
After such programming, briefly pressing the I button will turn on the previously selected mode. To set a new function for it, the above operation is performed again.
Button II
You can also assign a function to button II. You need to quickly press button III several times. The cursor will move clockwise. If you stop for 1-2 seconds and continue moving, it will move counterclockwise.
The pictures listed above will be selected one after another. When the cursor reaches the desired program, the movement of button III is stopped. To execute the selected program, the user presses button II.
10 seconds after pressing any button, the cursor will return to the initial state of CHECK. This command monitors the condition of the machine and the temperature in its interior. It does not change the alarm state. Knowing this, the user will not have a question how to look at the temperature on the Starline A9 keychain. During operation, this particular team is the most demanded.
Clock setting
Starting to work with the system, you need to learn how to set the time on the Starline A9 keychain. Hold button III until two beeps appear. The clock on the display will blink.
To increase the digital value of hours and minutes, press the I button, and to decrease it, press the II button. Switching from hours to minutes is done by a short press of button III.
After completing the settings, you need to exit the clock setting mode. To do this, hold down button III until a single sound signal appears. According to the manufacturer’s instructions, you can set the alarm or timer.
Record Codes
The driver can enter Starline A9 codes into the system’s memory on his own. Keychain programming is performed in the off-guard mode. You can bind up to 4 remotes. This must be done if the alarm system for some reason does not see the keyfob signal or you bought a car with an already installed system.
To enter the programming mode, you must turn on the ignition. The Valet service button is held until four beeps appear.
First set up the main keychain. The buttons I and II are clamped on it. For additional remotes without display, press buttons III and IV. After successfully recording the first key fob, one siren will sound.
For all trinkets the same procedure is performed. The interval between recordings should not be more than 5 seconds. Otherwise, the programming mode will end automatically. Next, turn off the ignition. The success of the operation will be confirmed by 5 outbreaks of the side lights of the machine.
Engine starting
Many drivers are interested in how to start a car with a key fob. "Starline A9" when connecting an alarm involves programming the type of gearbox. If it is manual, during installation the wire loop is cut (as indicated in the instructions). If the car is equipped with an automatic transmission, this element is retained.
The motor type is also set. There are two possibilities for remote starting the motor. In the first case, you need to place the cursor on the corresponding icon on the display screen. Then you need to press button II. Or just press the I button for 3 seconds.
At the first attempt to start, 3 beeps of a siren, 3 flashes of marker lights will sound. The key chain will emit a melodic signal. The icon on the display will light steadily. You can set the engine warm-up time.
Reset
Sometimes the driver may need information on how to reset the settings of the Starline A9 keychain. Actions are performed in a certain sequence. The ignition is first turned on. Next, the Valet service button is pressed 10 times. After that, the user turns off the ignition. The reset mode is entered if, after these manipulations, 10 beeps of the siren sound.
The service button must be pressed 1 more time. After that, another siren will sound. The driver presses the I button on the main key fob. A short beep will sound. This means that a reset has been made. The system will exit the settings mode automatically after 5 seconds. The side lights flash 5 times. The key chain will emit a melodic signal.
Having considered the features of the Starline A9 car alarm, you can perform programming the keychain easily and simply. Before starting work with the equipment, it is necessary to familiarize yourself with the manufacturer's instructions. This will allow you to use the embedded functions fully. If necessary, you can return the system to the factory settings. Management of the key fob will allow you to use the car's security system comfortably and fully.