In the event that Windows notifies you of a weak Wi-Fi router signal, this may mean that the connection speed is too weak and does not correspond to the declared level. Even worse, if in some place in your apartment or office the signal disappears altogether. However, you can solve the problem of how to amplify the Wi-Fi signal yourself. There are several recommendations for improving the signal. You can read them below.
1. You need to place the Wi-Fi router in the center of the future network, best indoors. If the access point is outside the building, then on the other hand the signal gain will be weak. If the computer is located on the second floor, and the router is on the floor below, then it must be placed as high as possible, for example, on a cabinet. But do not worry if this is not possible, since there are many ways to amplify a Wi-Fi signal.
2. Do not install the router close to the wall, on the floor, or to metal objects that will interfere and interfere with signal propagation.
3. With a low signal, it is worth checking the antenna of the device, and if necessary replace it. The antennas that come with the Wi-Fi router are omnidirectional. If the device is near an external wall, then half of the signal will go out. Most routers do not allow you to adjust the power gain. If necessary, you can purchase an antenna that will provide signal amplification in one direction. To choose a Wi-Fi signal amplifier, you can use the help of a consultant in a store specializing in such equipment.
4. The problem may be related to the network adapter of the laptop. As a rule, computers with the ability to connect to a Wi-Fi network have a fairly strong antenna, and updating the network adapter is not required. This recommendation applies to laptops that do not have Wi-Fi cards. As you know, the signal must not only be sent, but also received by the computer. To make a connection to the Internet, the router can transmit a signal quite powerfully, however, the signal is not always well received.
5. To expand the range of the wireless network, which will solve the problem of how to amplify the Wi-Fi signal, you must install a repeater. In this case, you do not have to stretch the wires or worry about serious settings. A Wi-Fi repeater is simply installed in the middle between the computer and the router.
6. A Wi-Fi router can broadcast a signal to several channels like a radio station. To amplify the signal, you can try changing the channel on the router configuration page. You won’t have to change the configuration on the computer, since it will automatically be able to determine the channel. To define a configuration page. You can refer to the instructions that came with the router. But, when solving the problem of how to amplify a Wi-Fi signal, one should not forget that network security is no less important than speed and performance.
7. To amplify the signal, it is necessary to reduce radio interference. Many microwave ovens, telephones and other equipment operate at the same frequency as the router. If you actively use such devices, the computer may not catch the signal from the router.
8. Manufacturers of these devices very often release updates for drivers and firmware. Often, these improvements significantly increase the performance of the router and optimize the signal.
9. To improve performance, equipment from one manufacturer should be preferred. Some of them even promise to double the signal when using a full set of hardware.
We hope that now you will have no problems with how to connect Wifi at home and amplify its signal. These skills are very useful for all those who use a Wi-Fi router.