Everyone knows that it is almost impossible to make a repair and leave a perfectly clean room after it without any pollution. It often happens that after work on the floor there are traces in the form of spots of used materials, such as paint, primer or varnish. And there is a problem of cleaning the floor to bring the room in its original form.
Therefore, the question: “How to wash the primer from linoleum?” Worries many owners. They just need to know about the ways and means that will help solve the problem.
Features
A feature of this type of building material is that after drying the primer is almost impossible to wash with ordinary water without the use of cleaning products.
In this regard, the easiest and fastest way is to wipe it until it dries, immediately after it hits the floor. To do this, you need a wet rag or sponge, with which you need to erase the drops of material from linoleum without residue.
Ways to wash the primer
If the place of contamination was not immediately noticed and the primer hardened, you can not do without using various detergents or improvised items.
There are a number of effective ways to wash the primer from linoleum:
- mechanical cleaning (using improvised items);
- with the use of detergents;
- purification using folk remedies.
Mechanical methods
Choosing this method and answering the question: “How to wash the primer from linoleum?”, It is necessary to observe maximum accuracy, calculate the strength. Otherwise, the risk of causing all kinds of damage to the flooring increases.
Before applying direct mechanical action, it is necessary to soak the primer stain. To do this, use warm water (not boiling water) or some kind of solvent, a small amount of which is poured into the stain and allowed to soak for some time. Depending on the size of the spot, the time period can vary from half an hour to two hours.
After this time, you need to gently wipe the stain with a fine abrasive sponge. Then remove the primer residues by washing the floor with plain warm water and a rag. If necessary, it is worth doing the procedure several times, taking into account the condition of the coating, so as not to aggravate the situation and not cause damage.
In addition to the abrasive sponge, you can use a spatula, blade or knife. In this case, the stain is also soaked with water or solvent, and then carefully scraped off. However, there is one caveat that should not be overlooked. When using a knife or blade, it is necessary to scrape the stain at an angle of no more than 45 °, so as not to cut through the linoleum.
You can also use a steam cleaner or steam mop. The effect of steam on an already wet spot contributes to its lagging from the surface of linoleum. And due to the fact that the steam mop is very maneuverable, compact and easy to use, this greatly simplifies the cleaning process.
Detergent cleaning
When choosing this method of cleaning linoleum from a primer, it is necessary to use products that do not contain alkali or soda, since these substances adversely affect the structure and appearance of the floor covering.
In addition, using any detergent, even which does not include soda and alkali, first you need to test it on a small inconspicuous area of linoleum. This must be done in order to avoid unwanted damage to the appearance of the coating.
One of the most effective and universal remedies for the question: “How to wash a deep penetration primer from linoleum?” Is solvent 646. In order to clean the surface of the remnants of such material, you need to moisten a cotton pad or small piece of cloth with solvent and wipe the contaminated area. If necessary, you can repeat the procedure several times until completely cleansed.
When asked: “How to wash the primer from linoleum?” The solvent is also an effective solvent. It must be used in the same way as preparation 646. In addition, using these products, it is necessary to protect the skin of the hands with rubber gloves, and thoroughly ventilate the room where the cleaning is carried out.
After thorough cleaning of the entire contaminated surface of linoleum, it is necessary to wash the floor with plain warm water to remove residual chemicals that are toxic.
Cleansing folk remedies
In addition to mechanical effects and chemicals, you can try to wash the primer from linoleum using folk remedies. This method is one of the most affordable and cheapest, but not inferior in effectiveness to the two previous ones. In addition, such products are the safest both for humans and for the surface being cleaned.
For example, if the scale of pollution is not very large, you can use nail polish remover, which is in the arsenal of any woman. A small amount of it is necessary to soak a cotton pad or clean cloth and wipe the stain, and then clean the floor thoroughly.
A more effective method involves purification using an aqueous solution of acetone, which is diluted in a ratio of 1: 2 (1 part acetone, 2 parts water). Then a clean rag with a hard pile or sponge is wetted in it, and a stain is rubbed off with it. After cleaning all contaminants, it is also necessary to completely wash the floor with clean warm water to remove residual mortar and primer.
Another folk remedy that contributes to the effective purification of linoleum from the primer is a solution of water with milk. It must be brought in a ratio of 1: 1, to wash the floor with it and especially the places of pollution. After drying this solution, you can wipe the coating with a woolen cloth. This will give linoleum a glossy sheen and a novelty effect.
Conclusion
Thus, the primer, of course, is one of the complex, time-consuming and unpleasant building materials, which can bring a lot of trouble when cleaning linoleum. But applying one of the described tips on how to wash the primer from linoleum and clearly observing the sequence of actions, to cope with this pollution will be easy.