Some of the materials that form the basis of the walls of houses require an external finish. Others eventually become unusable, and therefore also need to be lined. Wood serves as an excellent example. At first it looks quite attractive, but over time it requires strengthening and protection from external factors. If cracks and bumps appeared on the wood, they give the building an unsightly appearance. You can update your house by sheathing it with one of many modern solutions, which will be discussed below.
Wood use
If you are thinking about how to sheathe a wooden house outside, but still want to live in an environmentally friendly building, you can choose wood. It will still be relevant for a very long time. It looks great, and also allows you to adjust the humidity.
This material is one of those that does a good job of removing excess moisture. The most common type of cladding is imitation timber and block house. There is also a lining for sale. For decorating the house from the outside, it is made thicker than that intended for interior work.
A block house is an imitation of a rounded log. The front part of the decoration has a rounded shape. Imitation of a bar is similar to a planed bar. These types of cladding are fixed to the crate system, and then sanded and coated with impregnation. If you wish, you can paint or varnish the walls.
The lathing can be wooden or metal. If necessary, insulation is laid between the main wall and the finish. Basalt cotton wool can act as it, but it is better to refuse polystyrene foam and polystyrene.
Many home owners are wondering how to sheathe a wooden house from the outside cheaply. If you are one of these consumers, you can choose a planed board, which is one of the most inexpensive. Its thickness is 40 mm. Installation is carried out according to the same principle that is used in the case of a block house or lining - to the crate. The lower end of the upper board will go into the element below it by about 20 mm.
The disadvantage of wood is that it is exposed to putrefactive processes, pests, and in the absence of proper care it quickly loses its decorative effect. The material may change color, darken and become ugly. Before using wood for cladding, you must decide whether you can provide the home with the required care.
Use of siding
How to sheathe a wooden house cheap outside - photos will make it clear. If you live in a region where lumber cannot be called the most affordable, it will be more profitable to cover the house with siding. This finish allows after completion of work for a long time to forget about the need to repair the facade.
If you are interested in how to sheathe a wooden house cheap outside, you can choose a siding, which is also installed on the crate. The interior space is ventilated. The planks can be based on vinyl or metal. The latter option is more durable, but has an impressive weight compared to vinyl and does not resist corrosion as well. The surface provides for the need for painting already at the stage of the cladding.
Vinyl, when compared with metal, does not heat up, does not require additional processing and weighs a little. Siding has the form of panels that are easy to install and, if necessary, dismantled.
Work can be carried out in any weather. Installation starts from the corners. Elements are fixed to the crate with screws. The first fixture is installed in the center. A gap must be left between the siding and the nail head, as the material expands when heated. If work is carried out in cold weather, then the distance should be increased to 10 mm.
Additional features of vinyl siding
Many modern homeowners are thinking about how to sheathe a wooden house outside. If you like the look of vinyl siding, then first you need to familiarize yourself with it closer. The material is based on polyvinyl chloride. The width of the elements can be 205 and 255 mm. As for the thickness, it is 1.1 or 1.2 mm. There is a lock on the longitudinal faces, on the other hand - perforation for fasteners.
Experts recommend using a metal crate, but if it was not found at hand, you can use impregnated wooden bars. Vinyl siding has its drawbacks. For example, the material easily burns out in the sun, so it is recommended to acquire soft colors. The cladding can be operated at a wide temperature range from -35 to +50 ˚. It is important to consider that when the temperature drops, the panels become brittle and therefore easily damaged.
Should I choose metal siding
How to sheathe a wooden house from the outside - this is one of the main issues when it comes to the need to repair the facade. One of the market offers is metal siding, which is a strip of galvanized steel or aluminum. A protective decorative coating is applied to the surface of the finish. The fastening system is the same as the vinyl cladding.
The coating may be made of polymers. The material is distinguished by resistance to fading, reliability and the ability to withstand climatic factors. As one of the disadvantages is a limited selection of shades. At the production stage, metal siding is sometimes coated with powder paint. In this case, the color scheme expands, and the paint lasts for years, not exfoliating. It is possible to bend such material, but to break it is almost impossible.
Installation is not difficult. The difference when compared with vinyl siding is that installation is possible at low temperatures. If we consider this material in terms of durability, then this is a good option. But if you are very worried about the appearance of the house, then you should abandon the metal finish, because the exterior is too "production". The building will not resemble a residential building, but a workshop or warehouse.
Fiber cement slabs
If you have purchased a house and are now deciding how to sheathe a wooden house from the outside, you can consider fiber cement boards. They appeared on the market relatively recently. It is based on wood fiber, mica, quartz, as well as cement. Among the ingredients may be asbestos and chlorine. Some materials are used only for exterior decoration.
The resulting mixture is formed into separate sheets, which are dehydrated and fired. A decorative coating is applied to the surface at the final stage of production. If you want to purchase an inexpensive cladding, you should choose a material with acrylic protection, which is also resistant to fading.
Abrasion resistant boards have hydro-ceramic coating. Manufacturers claim that the material will be ready to last up to 30 years. It has low water absorption, but is expensive. Fiber cement boards with a photoceramic coating retain their color for a long time. It is easy to wash away dirt from their surface, and the cost is quite average. The coating can be smooth, matte or glossy.
Finishing is made in imitation of wood, brickwork and other materials. Installation is carried out on guide rails, which are fixed to the wall with clamps. Material may be suitable if you do not know how to sheathe a frame house. Using such fiber cement boards, you can create a seemingly continuous surface. The panels are interconnected hermetically, so precipitation does not fall inside.
Many today are thinking about how best to sheathe a wooden house outside. Fiber cement siding is also an excellent option. It is made according to the above technology, but the result is long stripes. Usually they have a standard size of 3600 x 190 x 12 mm. The material is cut with an electric jigsaw and installed on a wooden crate in compliance with the overlap. Fastening is done with nails or self-tapping screws.
Using thermal panels
Thinking about how to better sheathe a wooden house outside, property owners often also solve the problem of insulation. Two functions will be performed immediately by thermal panels. With their help, you can veneer the facade and make the house warmer. In the factory, a decorative coating is applied to the surface of the panels. It is similar to natural stone or marble.
The material is good in that it does not burn and has low water absorption. If you want to decide how to sheathe the facade of a wooden house from the outside, then you should pay special attention to thermal panels, which are made on the basis of mineral wool, polystyrene or extruded polystyrene foam. Depending on what type of insulation will be inside, a certain installation method is selected. For example, polystyrene and polystyrene foam should be glued to the appropriate composition. Joints are decorated with aluminum strips or by paste method.
If you purchase panels based on mineral wool, you will need to install them using technology based on a profile system. Joints between elements are repaired according to the same principle. Thermal panels are also clinker. At the production stage, clinker tiles are glued to the thermal insulation. This material is quite expensive, but its characteristics are impressive, as is the variety of types of this finish. In addition, you should not immediately abandon clinker thermal panels because of their cost, because they allow you to save more on insulation.
Using concrete tiles
If you still cannot decide how to sheathe a wooden house from the outside, a photo of the cladding buildings is recommended to be considered. Perhaps this will allow you to understand which material to choose. Among other market offers, it is worth highlighting concrete tiles, which differ from analog materials in their extensive color scheme. The cost of the material is reduced due to the drying method in furnaces, because ceramic tiles, for example, are subjected to costly firing at high temperatures.
A special method of vibropressing the surface allows you to create a special texture of the cladding. The material is durable and moisture resistant. It is possible to achieve unique properties by applying a special sealant to the surface. Before making a choice, you should definitely consider a review of the materials. Than sheathe a wooden house from the outside, this certainly should let you understand. For example, with regard to concrete tiles, it has a less impressive weight compared to natural stone. During operation, this material manifests itself in almost the same way.
Among the main characteristics, rigidity and strength should be highlighted, which makes the tile the most suitable facade material. If operated correctly, the service life will be increased several times. You can use this material for restoration of facade works. Finishing goes well with the insulation system, because it protects the building from external factors such as precipitation, heat, frost and fungal infections.
Negative customer reviews about facade tiles
Quite often, consumers make their choice based on reviews. The better it is to sheathe a wooden house outside, the opinions of consumers can allow you to understand. Like every other material, facade tiles have their drawbacks. For example, buyers believe that the material is quite large, so wet installation cannot be done. Finishing is not suitable for those houses that are built in areas with cold and long winters. Manufacturers of such tiles do not always guarantee the stability of the material at frequent temperature extremes.
Buyers also don’t like the fact that some trim elements may have uneven edges and fins on the ribs. These shortcomings significantly impair the appearance of the building. If it is impossible to use such a cladding, then you can correct it with a circular saw or a cutter, but this increases labor costs and installation time.
Natural stone reviews
If the budget allows, then, according to consumers, it’s best to choose natural stone for facade decoration. It has undeniable advantages. Firstly, the natural palette is unique and original. Secondly, you can be sure that the material is an environmentally friendly product. Thirdly, it is characterized by durability, water resistance and practicality.
Before you visit the store, you should read the reviews. How to sheathe a wooden house outside, you can understand only after you evaluate not only the pros and cons, but also the opinions of consumers. Having familiarized with them, you can understand that natural stone is quite easy to install. The main thing is to follow the instructions. A house decorated with such material will look stylish and prestigious.
Having visited the store, you can choose a natural stone in different formats. It could be:
- tiles with certain sizes;
- wild stone;
- die;
- Moscow fur coat;
- slabs.
The latter option is quite expensive, because for the manufacture of elements using a large one-piece stone block. If you want to beautifully sheathe a wooden house outside, then, no doubt, it is worth using a stone. It can be granite, which, according to customers, is practical and well polished.
Syenite has high rates of stress. It is resistant to temperature extremes and fire, which is especially true for wooden buildings. Durable and wear resistant labradorite. According to consumers, it generally has no shortcomings. Do not make a choice of cladding without reading the review. How to sheathe a wooden house from the outside, you can understand only if you familiarize yourself with the features of several types of finishes. For example, quartzite is also used for cladding facades. It is practical, well polished and resistant to chipping.
Finally
The market for modern building materials is very diverse. If you decide to wall the house outside, then you should consider several options for decoration. It can be a budget siding or expensive natural stone. If you prefer the latter option, but do not have enough cash, you can choose an artificial stone, which acts as an excellent imitation of natural. When deciding how to sheathe a wooden house beautifully from the outside, you should consider the photo. Quite often, they allow you to understand what material to give preference to.