The process of laying tiles on the floor may seem quite complicated, but in practice it becomes clear that it is quite simple to perform all operations, especially if you have to be patient. Having completed all the work yourself, you will be able to save a lot of money. So, let's look at how to lay a tile on the floor.
Before starting the main process, you need to prepare: measure the width and length of the room to determine the quadrature, and therefore the required amount of tile and adhesive mixture, as well as purchase all the necessary tools and materials. The list of required materials should be considered in more detail, since without this you will not be able
to lay the tiles yourself
.Naturally, you will need ceramic tiles or porcelain tiles. You must determine the type and size of the tiles, as well as the direction of their installation, and only after that you can calculate the required number. You need to take into account the cut pieces, because these residues can be useful in other places. The second important element is the styling solution. It is most correct to give preference to special moisture-resistant adhesive mixtures, which are usually called simply tiled glue. When calculating its amount, it is necessary to take into account that 4-6 kilograms of dry mix is spent per square meter of tile. The layer thickness should be 3-5 mm. And another necessary material is grout for joints. Expansion and fillet welds are best filled with silicone grout.
If we talk about
how to lay the tiles on the floor, then it is worth considering the necessary tools.
You will need:
- notched trowel with a tooth height of 6-10 mm;
- a mixer and an electric drill, with their help you will prepare the adhesive composition;
- a tile cutter, which can easily replace a grinder with a diamond wheel;
- a rubber mallet that will allow you to correctly place the tile by tapping;
- level or rule, the length of which must exceed 80 centimeters, this is necessary to control the correct placement of each tile. If the surface needs to be freed from irregularities, then a hammer may come in handy.
Speaking about how to lay the tiles on the floor, it is worth noting that you need to do this on a flat surface, which has already passed the preparation stage. First, you can get the items out of the box, put it on the floor to check the future drawing. Laying should be planned so that the cutting parts are near the walls, where they will be almost invisible. If you consider the question of how to lay the tile on the floor, then you should pay attention to the arrows that are on it. All should be facing in the same direction.
When the direction is chosen, glue can be applied to the surface using a trowel, and then remove excess with a notched trowel. The tiles are laid on the remaining waves, after which it must be crushed by tapping with a rubber mallet. For further installation, it is important to ensure that the direction is correct.
When working, it is necessary to immediately clean the excess solution from the seams, and then install leveling crosses, which will allow you to get the same width of the seams. When the solution has dried, you can start grouting. To do this, the seams are freed from dust and excess mortar, and then treated with grout, which is applied with a rubber spatula.
If we talk about how to lay tiles on a wooden floor, then the process is similar, only first you need to make sure that the surface is flat.