Most often, lamps in headlights require replacement in case of burnout. The reasons for this can be a whole multitude, and the most common of all is the accumulation of moisture in the condensate. Water droplets fall under the headlight and settle directly on the light source, as a result of which it burns out and becomes unsuitable for further use. Replacing a passing lamp is one of the simplest procedures that any car enthusiast can carry out, but this does not at all exclude the fact that you should use the instructions and tips of experienced car mechanics.
Cases associated with the burnout of lamps in the headlights are most often found among owners of domestic cars. They require such a procedure as replacing a passing lamp, Kalina, Priora and other cars of the VAZ concern. And in order to change the main LED in such a machine, you must first disassemble the headlight using a standard set of tools. A new lamp, which is screwed into the machine, must fully comply with its predecessor in terms of both parameters and light intensity.
Replacing a passing lamp in a car begins with the fact that you need to open the hood and unscrew the plug that holds the headlight in place. After that, all the bolts and nuts that hold the lamp are loosened, and the latch is pushed back. This element should easily succumb to pressing, and after the lamp can be freely removed from the grooves. When taking out a burned out lamp, it is important to remember its location well, since it is in this way that you will have to screw a new one after. If it is not properly secured under the headlamp, this can soon lead to a short circuit.
It is worth knowing to every motorist that it is impossible to touch the glass of the bulb itself, so you can screw it in by holding the cartridge. You should also check how firmly the new lamp is fixed in place. In fact, the replacement of the low-beam lamp is over at this stage, it remains only to screw in place the bolts and screws that hold the cartridge itself and the headlight. You also need to make sure that the latch snaps into place and screw the headlamp back on. When the entire structure is assembled, it is important to check the operability of the new lamp. The light should come out evenly and immediately after activating the headlamp. Different kinds of voltage drops, self-switching off the lamp indicates incorrectly behaved work.
You can buy suitable low beam lamps in any specialized store, as well as using the corresponding online store. As already mentioned above, the lamp holder must fully correspond to the brand of the car, as well as the year of manufacture, otherwise there will be constant malfunctions in the operation of this part, which is so important when driving at night.
Some experts argue that the replacement of the low beam lamp should be carried out in car services. Masters who have extensive experience working with machines will easily and very quickly carry out this simple procedure, and its result will be high-quality and durable.