Israeli Alpha Bio implants are made to completely restore a lost tooth. These dental devices are loved by both patients and dentists. Today, such products around the world are in great demand.
Features
Alpha Bio implants are screw-shaped rods made of metal alloy. This device is installed directly in the jaw bone so that they are the basis of the orthopedic design made in the form of an artificial tooth crown, and also replace the missing root. Delivered artificial roots will serve as natural. For these cases, various solutions and rod types may be required.
The Alpha Bio system ("Alpha Bio") is represented by a large number of implant design variations. They are different:
- length;
- width;
- the form;
- design;
- design;
- type of thread;
- cost.
It should be noted that Alfa Bio implants take root in almost 99% of cases. A huge variety allows the dentist to perform almost any orthopedic task. The presence of a special coating improves the ability of the implant to integrate into the bone tissue.
Pure titanium
Scientists have proven that pure titanium is a metal compatible with the human body. When properly installed in the jawbone of a titanium dental implant and following the appropriate recommendations, the body does not perceive it as a foreign body and does not reject it.
Pure titanium implants are considered more useful. Unlike titanium alloys, they take root better. Alpha Bio uses pure titanium without hazardous impurities for the manufacture of implants.
NanoTec porous surface
An important role in the process in which contact occurs between an artificial implant and living tissue is assigned to the material, as well as to the surface of the rod. Alpha Bio specialists have developed titanium with extremely fine grains of the Ti-6AI-4V ELI grade. Its advantages include enormous strength and excellent compatibility with living tissues.
In addition, a special treatment was carried out, which made it possible to create NanoTec ("Nanotek") - a special surface structure. As a result, the service life of Alpha Bio implants has increased several times. When viewed through high magnification, you can see a very heterogeneous and uneven relief, which was created by sandblasting using a medium-sized alumina powder. Finally, the result is complemented by acid etching. This technology increases the surface area in 3 dimensions, improves wettability when in contact with tissues.
Conical design
Alpha Bio implants also use another technological solution, which is a conical design. Designs are made in the form of a cone, which means that they exactly repeat the anatomical shape of the root of their own tooth. Therefore, the chewing load falling from the prosthesis to the bone is distributed evenly. Also, the bearing load may be increased on the implant as a whole.
Although Israel has received a corresponding patent for the thread and the specific form of the invention Alpha Bio, a large number of modern implants have a conical shape resembling the root of a real tooth. Such a solution is considered the most physiological and functional, as it allows the prosthetics to reproduce what is laid down by nature itself.
Thread and assortment
The product must have the appropriate thread, then it will be convenient to install it in the jaw, without applying extra effort and without causing injury to bone tissue. It is important that for each clinical case there is an appropriate model with the best type of thread. In the case of Alfa Bio, the situation is just wonderful, the catalog will always find the best option.
Hex implant and abutment connection
The connection of the implant and the abutment in the form of a hexagon is very simple in execution, and it is also reliable. There is a recess with 6 faces inside the implant, and a suitable hexagonal cone on the abutment. The latter is tightly placed inside the implant, is firmly fixed, without forming microscopic gaps and gaps. The internal hexagon is very popular because of the ease of execution. A significant advantage and advantage for the orthopedist is the versatility of such a platform. Therefore, abutments of other systems can be fixed on Alfa Bio implants, it can be:
Multifunctional individual packaging
The packaging of the implant, which is considered a trifle, actually makes a considerable contribution to the convenience of the doctor and reduces the likelihood of problems for the patient. So that after the procedure for installing dentures there are no complications, it is necessary that everything be sterile, including cleanliness in the office, sterility of instruments. It is very important that the implant itself is completely clean, and this no less depends on the packaging. Since the product is made in Israel, he has to travel a huge distance before being in the hands of a doctor. Therefore, it is important that before it is implanted, there is no dust and impurities on it.
Alpha Bio's individual dental implant packaging is very beautiful - it is a transparent double capsule. Through it, you can clearly see what is inside. The packaging contains detailed information. The serial number of the implant is recorded in the patient card, this is a guaranteed protection against fake. Using special installation tools, the titanium screw can be removed without difficulty, it is immediately transferred to the operating room.
disadvantages
These products also have disadvantages, which are not many. One of the disadvantages is that implanting an Alpha Bio implant is not possible without surgical intervention, accompanied by soft tissue cutting. Correct and high-quality installation can be carried out only by high-class dentists.
Range
A wide variety of Alpha Bio products allows you to solve many dental problems.
There is a spiral - SPI. In it, the screw is made in the form of a spiral, so it is self-screwing. The diameter of the internal hexagon is 2.5 mm. For this type of implant, there is no need to prepare a primary bed in the bone. This design has the highest initial stability, which makes it suitable for serious cases and simultaneous implantation with a quick load on the delivered rods.
"Dual Fit" - DFI is a cone-shaped helical rod. Its diameter is 2.5 mm. When installing such an implant, the risk of injury is reduced, and the presence of a “double step” makes the procedure for its installation easier. This rod is suitable for anchors in bone tissue of almost all types. In addition, he is endowed with a high aesthetic indicator, with its introduction throughout the jaw there is an even distribution of the masticatory load.
With thin implants - NICE achieves a great aesthetic effect. The point is the very small diameter of the rods. Due to the fact that they are very thin, they can be installed in those places where the thinnest bone is located - in the frontal areas. An abutment is integrated in the design, which makes the installation procedure easier. The healing and restoration process, thanks to the properties of this implant, is much faster.
The standard one has ATID cylindrical shape and double thread. It has a self-cutting effect. It is suitable for ordinary hard bones, but with certain changes, the installation procedure can be set to soft.
The hollow core of Arrow Press - ARRP is of the highest quality. It is great for quick installation. It has a built-in abutment. Since it is available in several variations, in order to install a removable prosthesis, you can choose the right model.
The unique design includes the Arrow Press Changib - ARRC. It has an internal hexagon that allows you to change add-ons. As a result, you can make changes, adjust the initial treatment plan. Suitable for all bones, including alveolar narrow ridges. An Israeli company produces ARB and ARR - these are temporary implants with specific features inherent to them.
The average cost of the Alpha Bio implant ranges from 5,000-7,500 rubles. It should be borne in mind that the price of implantation also includes procedures such as the manufacture and installation of crowns.
When choosing a design type, the dentist takes into account many factors that affect its main parameters. In determining the diameter, the width of the crest of the bone is important. As a result, at least 1.5 mm of bone should remain around the rod. The length is selected according to the vertical size of the bone tissue. When installing the rod, it is necessary to leave 2 mm from the main anatomical structures of the jaw. It will be a kind of security zone.
Israeli Alpha Bio implants, reviews of which are extremely positive, are delivered to many countries, including Russia. They account for more than a third of the entire implantation market. And this is understandable, since they can solve many problems, they are distinguished by impeccable quality and reasonable cost. The main thing is that a qualified dentist is involved in the installation of implants.