The heating cable "DEVI" is used to protect pipelines from freezing, freezing of ice and snow on roofs, in gutters and gutters. In addition, it is used to maintain the required temperature in hot water systems, technical installations, as well as to create a system of underfloor heating in residential premises. The main feature of such products is the ability of self-regulation of temperature, that is, heat transfer decreases or increases depending on their heating.
Heating cable "DEVI": principle of operation
Along the entire length of the cable between the parallel conductors (copper) there is a temperature-dependent resistance composition - carbon polymer. When the product is connected to a 220 volt network, the current passing through the coal composition heats it. As a result, the polymer expands, and the distance between the coal particles increases, and this leads to an increase in resistance. As a result, the current decreases and the heating (power) decreases. The self-regulation effect is built on this principle. The heating cable "DEVI" is also interesting in that the heating is controlled separately along its entire length, taking into account the ambient temperature in each section. If the outside temperature increases, the power released by the cable will decrease. Due to the described effect, the heating cable "DEVI" is protected from overheating of individual sections where the temperature is higher. Thanks to the parallel connection of the supply voltage, it is possible to shorten it anywhere. This greatly simplifies installation and design. When calculating the use of such cables, it is necessary to observe the maximum power parameters for various temperature conditions.
Software and hardware "DEVICOM PC PRO"
Using self-regulating heating cables together with the specified hardware-software complex, you can fully control the heating in your home. Thanks to this device, you can control the system settings and thermostats that operate on the network using a conventional personal computer. Thus, it is possible to set the temperature regime of the floor separately for each room, set the heating of the roof and drain channels, protect water and heating pipes from freezing. All information about each such object will come to your computer.
Such a hardware-software complex will be very convenient for workers who carry out installation work on the installation of self-regulating heating cables. The device will be able to detect system malfunctions.
This complex, connected to the network, reads and analyzes information from temperature controllers in a few days. This allows you to determine the features of the operating mode of the system under test and draw up a temporary heating map. Thus, it is possible to choose the most economical energy consumption for a given facility.
Conclusion
The use of such a product as a heating cable "DEVI", together with the software and hardware complex "DEVICOM PC PRO" provides efficient heating in an apartment, house, office, industrial workshop, gym. Installing such a system is simple at any facility, wherever comfortable heat is required. These complexes can be mounted both in new buildings and in the repair of old housing.