Many believe that only old houses and apartments are susceptible to mold on the walls . But recently, it has increasingly been the case that the fungus grows even on the walls of new buildings.
The builders themselves say that this phenomenon is due to the fact that during the construction of buildings began to massively use new types of insulation. They perfectly retain heat, but the “dew point” changes, as a result of which steam earlier begins to turn into water condensate.
It should be noted that because of this, even a strong house can greatly rot in just a couple of seasons.
So, you got mold in the apartment: what to do?
The danger of fungi is that once they appear, they instantly spread over all surfaces in the apartment. And they are interested not only in wood, but also in plastic, concrete and even wire insulation. With the latter, the mold in the apartment (what to do with which, we will tell) also does not "stand on ceremony", sometimes destroying the coating.
The main method of combating fungi is to maintain stably dry indoor air. It is necessary to repair pipe leaks on time, to prevent excessive waterlogging of the medium when using humidifiers.
It is necessary to begin the fight against uninvited vegetation with a complete cleaning and high-quality drying of the affected surface (at least two days). After that, the remnants of the mold are cleaned off completely.
If there are any reasons for wetting the surfaces (leaking pipe or holes outside the house), then they are eliminated. Imagine that mold appeared on a hard concrete floor in an apartment. What to do in this case?
First you need to thoroughly wash it using detergents or other detergents. Unfortunately, this will not be limited: it is necessary to remove the top layer of concrete and fill in a new one. It is best to add some fungicidal solution to the mixed mortar.
If this "evil spirits" appeared on a tree, then the special antiseptic salt "Bishofit" helps perfectly, after applying which you need to carefully coat the wood with drying oil.
Please note that you only need to use a natural composition, since lately synthetic linseed oil is very common, which, at the slightest increase in temperature, starts to stick strongly to your hands.
The most dangerous thing is the black mold in the apartment. What to do with her?
In this case, “heavy artillery” will come to the rescue in the face of chemicals (chlorine bleach, for example). In addition, special biocides (substances that kill all living organisms) are great. But before using them, it is better to talk with specialists, and the issue of airing the room must be decided in advance.
Remember that chlorine-based products should never be mixed with those that use ammonia. In this case, very dangerous gases can form.
Since it is quite difficult to remove mold in an apartment, it is necessary to actively prevent its appearance. As we have already said, air humidity should be controlled. In addition, the apartment needs to be cleaned regularly, if necessary, adding chlorine preparations to the water for washing floors.
Do not get carried away by prolonged airing of the room in the cold season, as even a single window, ajar for a long time, can lead to the formation of condensation, on which the fungus will grow perfectly.
Now you know how to process the apartment from mold.