The best options for painting walls: specialist recommendations

Everyone strives to maintain a warm and comfortable atmosphere in their home. Creating a stylish design is quite simple with various decorative elements. However, it is impossible to achieve perfect harmony without proper painting of the walls, especially if you do not have knowledge and experience in performing these works. Some people in the repair process can remodel the interior decoration several times, but still can not achieve the desired result. Today, there are some universal options for painting the walls of the house, which will give the interior a very stylish, modern and original look. The most important thing is to approach the matter very seriously, and then your apartment will be transformed beyond recognition.

General tips and tricks

Before you start painting the walls, you should first prepare them. It will take a lot of time, but without this it is impossible to achieve a good result. Walls must be completely cleaned of old materials. It is worth noting that if the walls were previously painted, then in this case it will be enough to wash them with an ordinary damp cloth from dust and dirt. After that, they are primed and puttyed. This is necessary in order to eliminate all defects and make the walls perfectly smooth. It doesn’t really matter which wall painting options you will use. If the surface is not previously prepared, then the paint will quickly begin to peel off, which will spoil the entire appearance of the room, and all your efforts will go down the drain.

Wall painting

After the preparatory phase is completed, you can begin to perform basic work. There are various options for painting the walls in the apartment, but they are all performed in a similar way.

Moreover, in the process of painting it is very important to observe the following rules:

1. Paint should be applied to the wall very carefully and evenly distributed on it. The movement of the brush should be unidirectional. Do not apply too much coloring matter to the surface, as it simply drains off the wall, leaving unsightly stains.
2. The finishing touch should be made from bottom to top.
3. If you use a paint made on the basis of a primer, then it is best to work with it with a hair brush.
4. If you use the options for painting walls in a large room, it is recommended to divide the surface into several separate zones. An exception is only paint created on the basis of a primer.
5. If any defect is found on the wall, then a larger amount of paint should be applied to it, otherwise it will be very striking.

Adhering to these simple tips and tricks, you will be able to qualitatively paint the walls and make the room beautiful and harmonious.

What paint is better to use for painting?

Choosing the right options for painting walls is not enough to create an original interior design. It is very important to choose a good and high-quality paint. In this case, the type and purpose of the coloring matter should be taken into account. This is very important, because the microclimate and humidity in each room are different, so the paint must comply with the conditions of the room in which it will be used. A universal solution can be a water-emulsion option.

It has the following advantages:

1. It does not have a pungent and suffocating odor.
2. Does not contain any harmful or hazardous substances.
3. It is not subject to fire, therefore it provides a high level of safety.

In addition, binders are present in the composition of the aqueous emulsion ink. Therefore, after dissolving in water and applying to the wall, the liquid evaporates, and the dyes remain on the surface. At the same time, the structure of the pigments does not deteriorate, therefore, the result of painting the walls with the help of this coloring material lasts much longer on the walls, and they do not lose their attractive appearance.

After complete drying, the water-based paint is not exposed to negative environmental factors, so it can be safely used for painting walls in any room. In addition, the water emulsion is perfectly applied to all types of surfaces, except metal, which allows you to use any type of wall for painting, be it brick, wood, drywall, concrete and others.

Kohler for emulsion based on water

Another plus in favor of choosing a water based paint is its versatility. Using color, you can get any shade that only pleases the soul. By mixing various dyes, you can make a truly original color that will create a unique atmosphere in the room.

Color should be added to the emulsion in small batches, constantly mixing the paint. In this case, it is very important to pre-calculate the exact volume of the coloring matter that will be needed for painting the walls. It is also quite important to mix the dye well, so that after applying the emulsion to the surface, the color throughout its area is uniform. Otherwise, stains will stand out on the walls. It is worth noting that any options for painting walls using water-based paints require its application in several layers, the first of which is diluted with water, and the subsequent ones are applied in pure form.

Painting the walls with a roller

To paint the walls as quickly and efficiently as possible, it is best to use special rollers. They have a roller that absorbs paint well, so the emulsion is evenly distributed over the surface and does not form sagging. Some rollers have a long handle that makes it easy to paint the walls of the ceiling without using a stepladder.

Varieties of Rollers

Rollers vary among themselves depending on the materials from which they are made.

To date, the following types of tools exist:

• From rosewood and nylon: have high strength and durability, as well as good resistance to chemicals in the paint. In most cases it is used for work with nitrocellulose and epoxy paints.
• Made of polyester and velor: it is quite durable and elastic, and also absorbs dyes well. Designed to work with alkyd and oily paints, used primarily for finishing.

In addition to the material, when choosing a roller, you must consider its size. When painting large areas, the working surface of the roller should also be large. In addition, to make the roller conveniently dipped in paint, you will need a special container, which is sold in any specialized store. This container has a ribbed structure, due to which excess paint is very easily whisked off the roller.

How to apply paint to the surface?

Painting the walls in the hallway, the options for which can be varied, will turn out to be better if you use adhesive tape.

The sequence of work in this case occurs in the following order:

1. The wall is divided by tape into separate sectors with an area of ​​one square meter.
2. Several strips of paint are applied to each square, after which it is evenly distributed over the entire area of ​​the sector. To avoid drips, the roller needs to be wrung out well from excess paint.
3. If the wall is multi-colored, then the first thing on it is to draw lines with a pencil, after which they are pasted with tape. This will create smooth transitions of colors and avoid stains.
4. After the paint dries, the tape is removed from the wall.

In order for the multi-colored wall to turn out beautiful and harmoniously look, great attention should be paid to the choice of tones. They should not only harmoniously combine with each other, but also fit into the overall interior.

Preparing walls in the kitchen and bathroom for painting

The options for painting the walls in the bathroom can be varied, but most people prefer to decorate the walls with color drawings.

To implement this idea, you should adhere to the following sequence:

1. The walls are primed with a special substance, which includes waterproof additives.
2. Then the walls are puttied, which allows them to be perfectly even and hide any imperfections.
3. After the putty is dried, the walls are treated with water-repellent impregnation.

Only after all these works have been completed will it be possible to start painting the walls.

Wall painting

Options for painting walls in the kitchen or in the bathroom require mandatory preliminary preparation of the surfaces. This is due to the fact that both rooms have a higher temperature and humidity. When the preparation of the walls is completed, you can proceed to the painting itself.

Most of the interior design projects are based on decorating the walls of the bathroom and kitchen with various colorful drawings and patterns, with which you can give the room a uniqueness. In this case, finishing paints are used. So that the wall does not lose its brightness over time, it can be opened with a special varnish that is resistant to moisture. For the kitchen, glossy paints will be an excellent solution. They do not absorb dirt, so the walls will be not only beautiful, but also clean.

Conclusion

Which coloring matter to use for the walls, everyone decides for himself. However, if you do not have enough knowledge in this area, then it is better to consult a specialist who will not only help you choose a high-quality paint suitable for the characteristics of a particular room, but also advise on the optimal tones.

Do not be afraid to experiment! Create the most comfortable living conditions in your apartment, and then your every day will be filled with new colors.