How to connect a projector to a computer: instructions

You can connect a huge variety of devices to your computer. All PC users should know about the features of each process. Today you have to understand how to connect the projector to a computer. In fact, turning an idea into reality is not as difficult as it seems. The main thing is to know about some of the nuances of the connection. What should users pay attention to? What will help bring the idea to life?

Connection Methods

First of all, it is important to understand that there are several scenarios. How to connect a projector to a computer? The user can use the following connection methods:

• wired method via VGA;
• wireless method;
• using HDMI.

Accordingly, the first option is used on stationary computers, and the second - on laptops. There is nothing particularly in the process. The main thing is to act correctly. How exactly?

Preparation for the process

For example, prepare everything necessary for the implementation of the process. You can bring an idea to life only if you have certain things. They are usually available to all users. In any case, after acquiring the projector for sure. Therefore, there are often no problems with preparation.

How to connect a projector to a computer? This will require:

• projector;
• a computer;
• monitor;
• VGA wire
• power cable
• driver disk.

This is the most common inventory that is used to implement the task. In addition, you need to have a separate outlet to which the projector is connected.

VGA Instructions

The simplest connection is working with a VGA cable. How to act in this situation? When the user has all of these components, you will need to follow a certain algorithm of actions. Moreover, regardless of which operating system is installed on the computer.

How to connect a projector to a computer? It is recommended that you follow these instructions:

1. Put the projector in the right place.
2. Connect the power cable to it and plug it into a power outlet.
3. Take 2 VGA wires. Connect them to the projector.
4. Insert one of the cables into the monitor, the other into the system unit, instead of the monitor.
5. Turn on the projector, then the computer.
6. Install drivers for the connected device.
7. Set the projector in the operating system settings as a monitor.
8. Save changes.

It's all. No further special actions need to be taken. Sometimes questions arise regarding how to set up a projector instead of a monitor in the operating system. But this will be discussed later. First, you should understand all the nuances of connecting the device.

Via HDMI

You can also use an HDMI cable to use the projector. This is a better way to transfer images. But how to connect the projector to a computer?

To do this, you will have to use the previously proposed action algorithm. The only difference that you should pay attention to is that the VGA cable will be replaced with HDMI. The rest of the instructions remain the same.

An important point is that you will have to work initially with the equipment turned off. Otherwise, there is a risk of malfunctions and malfunctions with the projector.

Without wires

Nevertheless, the listed methods are relevant only for desktop computers. Work with a laptop in this way will not work. How to connect a multimedia projector to a computer?

It has already been said that you can use a wireless connection. In fact, there is nothing special or incomprehensible in the process. The main thing, again, is to observe a certain sequence of actions. Only in this way will it be possible to fully bring the task to life.

To connect a projector (monitor) to a computer, you need to do the following:

1. With the technology turned off, insert special USB signal receivers into the laptop, as well as into the projector.
2. Turn on the equipment. As soon as the green light on the projector turns on, it will synchronize with the computer.
3. Install drivers for working with equipment. In Windows 7, they can be detected automatically.
4. Put a program called "Connect to the projector." Usually it is available on the device driver disk.
5. Run the installed software.
6. Accept the existing equipment settings.

Easy and simple. Now it’s clear what you need to connect the projector. The computer (Windows 7 or any other operating system - it is not so important) must have a set of new drivers for the peripheral device. Otherwise, it will malfunction.

System Settings

Now a little about how to correctly set the display of data from a computer to the projector. It is important to know about this feature. Otherwise, the projector will be connected, but it will not work.

Typically, the user should follow these steps:

1. Launch the operating system.
2. On the desktop, click on the right mouse button on any free area.
3. Select "Screen Resolution" from the list that appears.
4. In the "Screen" section, mark "Screen 2, projector." The inscription may vary, but the meaning does not change.
5. Save changes.

After that, the image should be transferred from the computer to the connected equipment. It doesn’t matter if Windows 7 is installed on a user or Windows 10. How do I connect my projector to a computer? From now on, the answer to this question is clear. In reality, everything is not so difficult. The main problems may arise precisely with the image output from the computer to the projector. But to fix the situation is not difficult.