The HP DesignJet T520 printing system is capable of displaying information on pages of any size. Also in this case, there are no restrictions on the density of the carrier. Therefore, such a plotter is a universal solution for creating specialized workflow systems. It is his possible areas of application that this review will be devoted to.
The main characteristics of the plotter
Inkjet technology is the foundation of the HP DesignJet T520. Its concept boils down to the fact that through the phased application of ink, an image is created on the surface of the paper. In monochromatic mode, only black is used. When switching to color printing, this list is supplemented with magenta, yellow and cyan. Intermediate shades are obtained by combining them.
The speed of this printing subsystem is declared at the level of 70 pages A0 for an hour. Their resolution is 1200X2400. The maximum power consumption of such a plotter does not exceed 35 watts.
The HP DesignJet T520 communications list includes the following interfaces:
- Wireless Wi-Fi is the most convenient for the reason that when using it there is no need to pull the wires to the plotter.
- The RJ-45 port in the process of functioning uses Ethernet protocol and twisted pair cable to transmit information.
- The least convenient connector in this case is USB. When it is activated, the plotter control functions are transferred to the computer.
Cartridge system. The expediency of installing a CISS
These cartridges in the HP DesignJet T520 must be installed to run:
- HP 711 Black labeled CZ129A - filled with black pigment ink.
- HP 711 Cyan with position number CZ130A. Inside it is blue ink.
- HP 711 Magenta CZ131A Index. Its capacity is filled with purple.
- HP 711 Yellow with CZ132A. There is yellow ink inside this cartridge.
The capacity of the first of them is 38 ml. The remaining three have the same volume - 29 ml. Monochromatic ink, as previously noted, has a pigment base, and color - water. This is a basic set of cartridges, but there is also an extended one, which includes the following models:
- Monochromatic HP 711 Black with the designation CZ133A. Its volume is 80 ml.
- Cyan HP 711 Cyan Labeled CZ134A.
- Magenta HP 711 Magazine CZ135A.
- Yellow HP 711 Yellow, which is catalog number CZ136A.
The last three color cartridges have identical capacity, it is 29 ml.
From an economic point of view, the installation of a CISS is justified in this case. It allows you to minimize the cost of buying cartridges. However, from the standpoint of warranty obligations, this approach is not fully justified. If the printer fails, then its repair will be very, very expensive. In this case, the service center will immediately indicate that the printing system is used in non-nominal mode and will not restore its performance free of charge.
Design office application
The HP DesignJet T520 plotter is most optimally applicable in a specialized design office that develops large enough projects. To display an explanatory note, you can use a simple laser printer or a multifunction device. But for the formation of the graphic part of such a project, the plotter in question is simply perfect. It is capable of printing not only on media with dimensions A0, but also on pages with smaller sizes: A1, A2 and even A3. As a rule, drawings are displayed in monochromatic format, and such an inkjet printer will cope with this task without any problems. But also in some cases, a color output may be needed, here, too, no problems should arise.
Use in the copy center. Application specifics
Other places to use the HP DesignJet T520 EPrinter are copy centers. As a rule, they are located near the educational institution and are aimed at solving the problems of students studying there. The latter do term papers or graduation projects. Both in the first case and in the second, a prerequisite is the presence of a graphic part. Moreover, it can include quite large formats: A1 or A0. It is for printing such drawings that the peripheral device considered in this material is involved.
Advertising agency
Also, the HP DesignJet T520 plotter can find its application in an advertising agency. Of course, he will not be able to completely cover the need for printing. To do this, you need to attract a special printing center. But such a printer can very easily display finished layouts in large format and coordinate them with the customer. Again, it is able to function not only in monochromatic mode, but also in color. And, as practice shows, it is the latter in the advertising agency that comes to the fore.
Conclusion: cost, reviews
During the operation of the HP DesignJet T520, users identified its following shortcomings:
- Slow media feed when using manual mode.
- Sometimes there are problems with the accuracy of cutting printed on a roll of the drawing.
To fix them, the owner must download the latest version of the plotter shell and install it.
The advantages of the system include:
- speed;
- functionality;
- communication set;
- the ability to display on pages with any density;
- simple tuning algorithm.
The cost of such a documentation output system is about 100,000 rubles. For its highly specialized niche, this is really a great solution that can handle any printing task.