Plastic doors - a unique design that has a lot of positive features. Their popularity is growing daily, therefore, the need for their repair becomes in demand. This has become the main reason for more detailed understanding of the main details. As a rule, the most important and significant elements are loops, the design of which must withstand any load. Their main function is the reliable fastening of the door leaf to the frame, as well as ensuring normal rotation during the opening and closing of the door.
Features hinges for plastic doors
Before you remove the hinges from the plastic door, it should be noted that they differ in a rather complex design. In order to remove the structure from the hinges without any problems, it is necessary to understand the principle of the device, which is represented by the following components:
- The hinge is a metal tab, which is the door part.
- The frame part with integrated pins, which are required for fastening the structure.
- Remote bush located between the door and frame parts.
The presented components are able to ensure the fit of the frame and door. The door will open and close smoothly. If necessary, you can adjust the hinges in the desired direction, providing comfortable operation of the lock and lock.
As a rule, adjustment is carried out in two ways: horizontally and vertically. The first option is performed using a special template for loops, and the second involves the use of screws for adjustment, located under the decorative caps of the products. Hinges sometimes need lubrication, which will not only extend the life of the product, but also take care of the reliability of the product. It should also be noted that overhead loops are distinguished among the most popular options.
Choosing a plastic door is considered a responsible occupation. Therefore, it is initially recommended that special attention be paid specifically to overhead loops, which will allow you to purchase quality products. After all, as a rule, the quality of the hinges affects the functionality of the doors in general. Often you can encounter a situation where distortions are noticeable, which is the reason for the incorrect selection of loops that have weak characteristics.
Overhead loops today are usually classified according to GOST, and they all have different mounting options. Such door elements also exist for various needs, therefore, the characteristics indicated during the sale should be taken into account.
Selection recommendations
Before you independently remove the plastic door from the hinges, it is recommended to pay attention to the following points:
- is there an amplifier;
- what is the design of the sash and frame profile;
- sash sizes and weights;
- wall thickness;
- by what principle do the doors open.
The above points must be honored so that there is no need to remove the canvas, and the design itself has served for a long time. Almost always have to deal with Teflon loops, which are particularly reliable. However, if the loop fails, there will be no problem replacing it. Often, reconstruction will be needed in that situation if insufficiently installed fittings that are out of order are installed.
When is dismantling necessary?
A problem in the door structure can occur suddenly. However, in some situations, dismantling the door structure may be a planned activity. Often you have to deal with a broken door, because the door itself or some of its fasteners may fail. You may need a quality adjustment. In almost all situations, the door has to be completely removed from the hinges.
It is important to note that ordinary people often face the problem of how to remove the plug from the hinge of a plastic door. This procedure is the final part of the complete door installation process and requires special care and installation accuracy.
Among the common causes, the replacement of individual parts or the installation of a new door should also be highlighted. In such cases, removing the structure from the hinges becomes a necessity. It is customary to highlight and repair work in the house, during which the canvas significantly interferes.
Door hinge device
Metal alloys are the main material from which the door hinge is made, and the parts subjected to stress are made of stainless steel. To understand the principle and design of the door hinge, you should know all the elements of which it consists:
- metal tab and door part;
- the frame part, which includes built-in pins designed for mounting;
- spacer made of durable Teflon and located between the frame and door parts.
Before removing the hinges from a plastic door, it should be noted that it does not have any special differences in design with a conventional door. However, each of them has a peculiar design. The main difference is the ability to adjust the position of the door, which is attached to the hinges. Due to this feature, the doors can be moved a few millimeters in all directions to achieve a good fit of the sash and the efficiency of the locks.
The loop is installed using a metal tab, which is attached to the likely location of the loop. The tab allows you to adjust the door in all horizontal directions. The regulation of the loop in the vertical direction is carried out by special adjusting screws installed at the end of this hardware.
Thanks to certain technical solutions, the design of the hinges allows them to be used for a long time:
- the use of durable teflon in the design of loops;
- the presence of built-in ball bearings in the design of loops;
- the structure is easily lubricated if necessary.
How to remove the hinges from a plastic door: the main reasons
Despite the reliability of the hinge design, they can fail at any time, which will lead to their replacement. Replacement will be required in the following situations:
- possible marriage of one of the elements of the loop design;
- destruction of the axial cylinder;
- hinges are not able to support a door of a certain weight;
- mechanical damage to the loop.
The use of high-quality fittings allows avoiding such phenomena, but at the same time they cannot be completely eliminated.
Tools for replacing hinges on plastic doors
To replace the plastic doors, just use the following tools:
- hammer (milking);
- screwdriver;
- pliers.
The presented list of tools will allow you to decide how to remove the hinges from the plastic door.
Remove the plastic door from the hinges: step by step instructions
Before you remove the plastic entrance door from the hinges, it should be noted that its design is no different from the usual version. To properly perform the work, it is recommended to follow the following steps:
- First, all decorative caps are removed from the hinges that cover them.
- Using a hammer, the axial mechanism should be knocked out. It is important to consider that the door itself should not be completely closed. Enough to cover it.
- Further, in the lower part of the loop, a small part of the axial mechanism is formed, which should be hooked with pliers and pulled out of the loop.
- After that, the door should be tilted toward itself and held firmly, and its door should be raised 5-7 cm to achieve the release of the lower support. As a rule, the lower hinges are not fixed, so the door can be easily removed.
It should be noted that the description of the process of how to remove the plastic balcony door from the hinges is similar to the procedure for removing and replacing the front door.
Finally
In conclusion, it should be noted that the problem of how to remove the cover of the hinge of a plastic door is important during installation. And she should also be given special attention. So, changing hinges on plastic doors is not as difficult as it seems at first glance. However, in the absence of experience in carrying out such work, it is advisable to seek the help of a specialist, because a factory defect may be a possible cause of failure.