From some specialists and ordinary consumers, you can hear the opinion that an expanding range of finishing materials is replacing outdated options. But practice shows that this is not entirely true. Traditional decisions change under the influence of requirements and appear before consumers in a different light.
Solution of the problem
The most significant example here may be wood. It is a familiar material, but over time does not lose its attractiveness and only strengthens its position. Today, interior decoration using wood is a stylish design option, because it is not only attractive, but also environmentally friendly.
Some believe that the only option available in this case is wall paneling. But, visiting the store, you will understand that there are many alternative solutions.
The main types of wood finishes: board
Walls are being finished with boards of various types, they can be:
The latter option is the most popular. Its relevance is due to several factors. Among the advantages of the material should be highlighted:
- simplicity in manufacturing;
- wide range of shades;
- excellent operational characteristics;
- attractive appearance;
- affordability;
- the ability to additionally color the wood with special wax impregnations and stains.
Finishing the walls with a board can also save, as the material is easy to manufacture. For its production, many species of wood are used, namely:
- maple;
- ash;
- larch;
- beech;
- cherry;
- sweet cherry;
- pear.
Taking the opportunity to choose the right shade with such a wide range, for each interior you can choose the right option. The wood has a light shade, and if you have other preferences, get a material of dark deep color. The types of wood mentioned above are of high quality and have good properties.
The decoration of the walls with a parquet board allows you to create an interior that cannot be repeated using any other material. An additional bonus will be affordable cost. And if you want to make the surface of the walls not only beautiful, but also resistant to external influences, then after finishing they should be covered with stain or wax impregnation, which can extend the life of the material, changing its appearance for the better.
Using Array and Block House
If you wish, you can decorate the walls with a board, photos of such interiors are presented in the article. It can be based on an array. If you competently approach the cladding, you will get a spectacular interior. The use of appropriate oil and wax based impregnations will give the boards a velvet-like structure. After such protective manipulations, the board will have a layer in the form of a film, which repels water well and prevents the development of mold and fungus.
If you want to buy a decorative board for wall decoration, you should pay attention to the block house. With its help, you can recreate a rural landscape with a log. In order to make the walls even more spectacular, it is recommended to resort to artificial aging of wood. Wall decoration with a board in this case will involve the use of brushing technology, which involves the use of a wire brush. During the processing of wood, fibers are removed from the surface, which allows you to create an interesting relief. After that, the material is painted, and the surface is left until it dries.
Laminate flooring
A decorative board for wall decoration can be a laminate, which sits on glue or crate. The first method is the simplest and does not require additional skills. To facilitate the task, it is necessary to assemble panels from the panels. Their side parts are smeared with glue, and after the elements are connected so that complete panels are obtained. They are attached to the surface of the wall. It should be prepared in advance, for example, to markup. Work should begin from the lower left corner. In this case, the platbands are removed, and after repair are installed in place.
Wall decoration with a board may involve installing the laminate on the crate. First you need to take measurements, determine the amount of material, moldings and other details. Using a pencil and a ruler, marking is applied to the surface. Further it is possible to remove platbands and doors. A lath in the form of a frame is installed on the walls. For this, wooden blocks are used, which are fixed perpendicular to the floor, as well as parallel to each other. The distance between them should be 40 cm.
Then you can proceed with the installation of the material, starting from the lower corner of the left side of the room. In the corners, the elements are cut with a hacksaw or electric jigsaw. Planks should be staggered. The joints are treated with silicone. The locks must be connected until they click.
Modern solution: wooden wallpaper
A rather interesting solution is wooden wallpaper, which is an alternative to natural wood trim. The basis is paper on which wood veneer is applied. The material is sold in rolls. The cost depends on several factors, but the main one is the price of raw materials. The process of wallpapering is somewhat different from the technology, which involves the use of ordinary strips of paper for decoration.
Using a saw
One of the most popular and unusual options for interior decoration is the finish with a saw cut. A cross section of a trunk of small thickness is used as the main decorative element. This method is common, so manufacturers began to produce wallpaper and tile in this form. However, such cladding should be located only on part of the wall. Experts do not recommend zealous, because an unusual finish can ruin the interior. The best option is one wall, which is located at the head of the bed.
The surface is prepared, it should be painted in a calm color, and then put logs on the surface, reinforcing them with glue. Fixing is carried out closely, but you can recreate an interesting fragmentary picture.
Using panels: preparatory work
If you want to use panels, it is best to apply a Christmas tree pattern to them. To implement the venture you will need tools:
- hacksaw;
- protractor;
- duct tape;
- pencil;
- sheathing.
The adhesive tape should be double-sided.
Work technique
First, the calculation is made, then you can start marking and trimming the slats. The main stage is the fastening of decorative elements. On a piece of paper, you need to make a diagram of how the finished wall should look. In the middle of the wall you need to draw a vertical line, which will act as a border for laying panels. They are prepared at the next stage by cutting at an angle of 90 °, so that the edge is oblique. One half of the boards is cut from the right corner, the other from the left.
Next, a double-sided adhesive tape is taken, which is attached to the panels. Each bar should have three stripes. The middle elements are fixed first. In this case, you need an assistant. Planks are applied with oblique corners, you need to navigate to the line. There should be no gaps between the elements. The panels are mounted on the wall. To do this, remove the protective film and press the strips to the surface. This decoration option is most often used for bedrooms, but you can experiment and try it in the kitchen.
Budget calculation
If you want to decorate the walls with boards in the apartment, then you must calculate the budget. For example, you can buy a massive board from elm for 1,600 rubles. per square meter. In order to find out how much you spend on material, you must determine the surface area to be trimmed. And for this, you should measure the height and length of the room and multiply these values, and then multiply the area of one wall by two. The same should be done with a wall that is adjacent.
It is important to subtract the area of windows and doorways. Once you know the total area of the walls to be trimmed, this figure must be divided into the area of one board, which will allow you to get the number of boards that you need to purchase. To this value should be added about 15%, which will be spent on scraps and scrap.
In order to make the budget calculation more clear, we can take as an example a room with a ceiling height of 2.25 m. The length of one wall is 6 m, while the other is 3 m. The area of two opposite walls is 13.50 m 2 . The area of the other two walls is 27 m2. The total area to be trimmed is 40.5. This value must be multiplied by the cost of one square meter - 1,600, which in the end will allow you to get 64,800 rubles. That is the budget for repairs.
Project drafting
Choosing a board for interior wall decoration, you can pay attention to the lining. With its help it will turn out to give the room a cosiness. The board also has great potential. Using it, you can experiment by laying the material in a herringbone, diagonally or with diamonds. You can paint the surface of the cladding with a gradient transition. At the same time, scope for imagination will be provided at minimal cost. The catch is only to correctly select boards that should not be overdried or wet.
Calibrated smooth products are suitable for strict minimalism, while you can choose different-sized rough ones for a summer cottage interior. When choosing a board for wall decoration in the house, you may prefer a laminate. It is an inexpensive alternative to flooring. There is only one drawback - allergy sufferers do not like the material.
If you want to make the room more noble or to finish it in the style of modern classics, it is worth choosing an engineering or massive board. Piece parquet is usually laid with patterns, and the parquet board is mounted in a run-up. Products can have different shades.
Decorating the walls with a wooden board quite often involves the use of aged material. At the base, you can use larch. Small dies can be of different breeds and degrees of aging. The material is stacked at random, and wide massive boards - in length. If you have a board with peeling paint available, it can also be an excellent decoration element, but before mounting it is necessary to fix the color on the surface so that the paint does not fly off further. This cladding is relevant for styles:
- Provence
- vintage
- eco;
- country;
- Scandinavian.
Unedged board specialist tips
Wall decoration with unedged boards may include the installation of overlapping material. If you want to install the board outside, then the primer will become a connecting link with a colorful and adhesive composition. This will increase the wear resistance of the coating. Under the lining, you can lay mineral wool, which is not combustible and is waterproof.