As you know, progress does not stand still, and if a century ago it was enough for car owners to ensure that the car was provided with minimal conditions for driving, today the situation is completely different. Current automakers are competing not only in capacity and safety, but, of course, in comfort. Of course, in our time, comfort includes high-quality sound, which helps brighten up any trip. Acoustic wires for cars are considered one of the main components for reproducing any sound.
Autosound is considered to be a ready-made system for reproducing sound. And, as before installing any element, car audio has its own nuances. For example, such as cable selection. The purity and sound quality depend on the competent choice of cable, but the work does not end there. The speaker cables still need to be correctly positioned around the car and there are four basic rules for wiring:
1) Use as high quality interconnect and acoustic wires for cars.
2) Run RCA cables as far as possible from the car wiring and speaker power wires.
3) Cables should not be longer than required to install the item.
4) If possible, ground all system components at one point.
Also, do not forget that when laying speaker cables for a car, you must provide them with good power for the amplifier. It is recommended that the radio power is output directly to the battery, and the amplifier power is connected to the ignition switch or an optionally installed switch. It should also be said about such an important thing as the grounding of the amplifier. There are three basic rules:
1) The ground wire should be no longer than 45 cm and should be located as close as possible to the amplifier.
2) The cross-section of the ground wire should be less than positive.
3) Ground only on an unpainted body surface.
Acoustic wires for cars are one of the favorite topics for debate among many experts in this field. Now there is a tendency when even beginners in this field pay special attention to the cross-section of wires. Many will say that a wire cross section of 2.5 sq. Mm will be sufficient for any acoustics, however, old-timers advise against putting all systems under templates, because each system is unique in its own way, and the purity and sound quality depend on several factors at once.
When choosing speaker wires for a car, you must also pay attention to what material it is made of. The most popular is copper, but its quality is quite diverse. When buying expensive cables with widely publicized indicators, we recommend that you don’t believe the manufacturer’s words, because the average consumer simply can’t verify the stated requirements. Try different brands, read reviews on the Internet, but if you don’t have time for this, we recommend taking cables made of pure silver, the sound quality and reliability of such conductors have proven themselves among many car audio lovers.