Carpet - flooring, which is used not only for practical purposes, but also to create comfort in the room. But there is a problem: the carpet in the living room gets dirty quickly and needs regular cleaning. After "water procedures", carpets often lose their appearance, dropping and squeezing.
After a grandiose cleaning, the hostesses wonder how to raise the pile on the carpet without using expensive means. We found some simple ways that greatly simplify cleaning and restore carpet pile.
Winter recovery
If cleaning is planned in the winter, it is not difficult to raise a long pile on the carpet: for this, it is enough to take it outside and clean it with snow. If the palace is not too dirty, then raise the stale or crushed legs of the furniture with a small handful of snow - just sprinkle it and wait until it melts. The villi will be straightened out.
Ice
You can use this life hack not only in winter. Freeze a little ice, put the pieces in the places that need to be restored.
The ice should completely melt right on the floor. The pile will freeze from the cold, and in the process of melting it will melt, become softer and more pliable. But be careful - large amounts of ice can ruin your carpet.
Use small pieces of ice. When the villi become softer, lift and straighten them with an old kitchen fork. So you can raise the pile on the carpet at home.
Warm water
Carpets are often folded or folded for storage, so ugly folds and folds sometimes remain on them, which cannot be smoothed out without your intervention. To eliminate creases, moisten the surface, turn the carpet inside out and leave for a couple of hours. Wait half an hour, unfold and dry thoroughly. Just be careful: this method can harm adhesive-based carpets.
Pull the carpet in places of creases, put heavy objects on them and leave for 2 hours. The crease will smooth out.
Vacuum the carpet without a nozzle to lift the pile taken from the load.
If your carpet is synthetic, moisten it in places of bending with warm water - the temperature should not be above +35 o C.
Salt recovery
Another way to repair a long pile carpet is to use salt. This is a particularly effective way to recover after washing. The process consists of several stages.
Sprinkle with salt and evenly distribute the damaged areas. Leave the damaged areas alone for several hours, and preferably for the whole night. Wet the brush and spread the salt over the surface. Remains clean with a vacuum cleaner.
Instead of salt in the same way, some hostesses clean and restore with sawdust. They not only clean well, but also saturate the room with an incredible smell.
Using steam
There is another way to raise the pile on the carpet. To return the pile to its former appearance, it must be softened. This can be done not only with the help of ice, but also with the help of steam.
To restore the carpet to its former appearance, often use a steam iron. Pinned place treated a few seconds. Attention! Do not bring the iron close to the carpet or iron the pile! You will harm the artificial flooring: the fibers of the carpet will melt under the influence of high temperatures, and instead of the corrected area you will get a burnt spot.
So you can raise the pile on the carpet without using chemicals. When cleaning and restoring carpet, it is necessary to take into account the degree of damage. If small patches are pressed on the carpet, then it is better to use ice or steam, but if the carpet is very caked and is sold around the entire perimeter, then it is better to use salt or sawdust.