Ceilings have long ceased to be associated with painting and the use of white. Modern apartments are increasingly being designed taking into account the installation of stretch linens, which are distinguished by their aesthetic appearance and resistance to physical influences. In parallel with this, the technologies of lighting systems are also being improved , as can be seen in the example of LED devices. The combination of two innovative solutions provides a stylistically original effect. You just need to choose a suitable design concept and integrate the lights into the suspended ceiling, taking into account the technical nuances. The market offers many options for devices that differ not only in appearance, but also in the method of installation and the supply of light.
Choice of traditional fixtures
If modern ceiling designs, despite the high cost, quickly located an ordinary layman, the new lighting means do not yet differ by a noticeable advantage over classical solutions. Therefore, for tension structures quite often use familiar chandeliers and lamps with incandescent lamps, as well as halogen and luminescent models. There are no particular obstacles to this combination, however, some features of operation should be taken into account.
The fact is that the fabric used in the decoration is sensitive to thermal effects, for this reason, even at the installation stage, a thermally insulating ring should be provided. This addition will protect the tensioner during lamp heating. However, you can do without a thermal insulator if the lamp power does not exceed 20W. Such models are usually used for small rooms. For example, for the nursery, study and bathroom.
LED lighting tapes
Diode tapes make worthy competition to traditional light sources. In this case, you can count on getting soft diffused lighting, which is optimal for living rooms and rest rooms. The greatest effect is achieved if such a tape is provided on a high ceiling with a matte finish. But this option requires the competent implementation of electrical work, since LED lamps for ceilings in the form of tapes are a whole complex of bulbs. The main task is to ensure the optimal operating mode of each light source in such a way that a sliding glow effect is created. In other words, you should get an even and balanced surface coating with soft light. The color of the radiation can be any, in this regard, manufacturers do not skimp on a variety of decorative solutions for LED strips.
Special lights in stretch ceiling
For those who want to initially insure themselves against the risk of errors in installation, it is worth recommending special fixtures designed for installation in a ceiling with a tensile structure. It must be emphasized right away that in terms of performance and external performance it can be a very familiar model that resembles classic devices. A lot of original solutions. For example, a lamp-ball fits organically into the canvas, providing a pleasant and unobtrusive dispersion. A feature of such devices is the design, designed for installation in a ceiling tension niche. To do this, developers give the fixtures the ability to adjust the reflector horizontally and vertically. Also, there are devices with moisture protection and steel materials in the case.
Spotlights
Firms that specialize in stretch sheets quite often offer the installation of spotlights as an additional service . This solution is really very beneficial both for aesthetic reasons and for the reliability of the structural design. The device recessed into the ceiling niche is notable for its small size and the ability to create interesting highlights on the adjacent area. But if you install spotlights in the stretch ceiling of a spacious and high room, then the amount of radiation may not be enough. This is one of the main disadvantages of such devices. They are good as an element of decor, but as a full-fledged light source for large rooms are not suitable. The output may be a combination of point devices and a full-fledged chandelier.
Classical installation of fixtures
A feature of the installation of traditional fixtures is that the mounting location is provided with the necessary fixtures even before the installation of the stretch web. A typical example is when a hole is first drilled and a hook is attached, and then the ceiling is installed. Further, a cut is made in the web through which the cable is passed. After that, you can fix the chandelier. There are other ways of fastening. For example, a lamp-ball may provide for strip mounting. In this case, you must first install a wooden block, which will coincide with the tension coating. The rest of the work is performed according to the usual scheme. There are other approaches to installation, but all of them provide for close interaction between the fastening system and the ceiling structure already at the level of the rough surface.
Mounting recessed fixtures
This type of installation is less troublesome, but requires accuracy and accuracy. After the stretch fabric has cooled down and gained operational properties, you can begin work. A special rack is mounted at the place of future installation. Further, a circular profile is applied to it. A contour of the web is cut along the contour of this fixture, which is glued to the stand. This will make it possible to route the cable and make the connection. It should be noted that the installation of built-in fixtures allows you to implement a lot of decorative solutions at the installation stage. In particular, the hole formed for wiring can be decorated with a trim or frame made of heat-resistant materials. Also, the profile itself can carry an aesthetic function.
What to consider during operation?
There are no special requirements for the care of luminaires in a stretch ceiling, but it is advisable to observe the general requirements. The secured area must be protected from dust and moisture. When performing repairs, it is recommended to protect it with a casing or a special film. In order for chandeliers and lamps to last longer, experts advise using damping materials in the niche of the ceiling itself. However, this function is usually performed by a heat or sound insulator, which is laid at the base of the structure. Thanks to these materials, vibration is reduced, which increases the working life of the fixtures.
Conclusion
The use of stretch linens is aimed at performing decorative functions. Therefore, the luminaires in the suspended ceiling should be installed as a stylistically appropriate addition. The range of proposals on the market for lighting devices is so wide that a suitable shape and color model can be found for any room. Do not forget the design features. For example, the ability to customize the reflector, the presence of thermally insulating materials in the case, compact dimensions are only a plus for the light source for a stretch ceiling.