The fashion for holey jeans with roughly cut edges has not been going on for several seasons in a row, and there are no prerequisites for this to happen in the near future. At first, this trend was an attribute of the grunge style. But then the hooligan custom took root and became popular even among employees of reputable offices. True fashionistas and fashionistas mix aged denim with elegant shoes, expensive jackets and branded bags. If you want to join this global trend, there is no reason to splurge on a new pair, because making ripped jeans with your own hands is as easy as shelling pears. However, manufacturing technology has several nuances. Just cutting openings is clearly not enough. They should be placed in the right place and properly processed. Only in this case will the thing look natural and harmonious.
Where to place holes on jeans
Before you begin to manufacture ripped jeans with your own hands, it is advisable to study the photos in magazines in advance. This will help you choose the right design. The most popular location for this fashionable detail is, of course, the lap. Holes can be placed both on one leg, and on both, be symmetrical or have a completely different configuration. As a rule, the holes on the legs in other places are already made in addition to the existing holes on the knees: in this case, the thing looks natural and stylish. However, there are no strict rules here, it all depends on your taste and personal preferences.
Other good places are the front of the thigh and the front of the lower leg. Holes are usually not made behind, as this is inconvenient and impractical. The scuffs located not only on the trouser legs, but also on the belt and pockets look beautiful. So, it's time to figure out how to make ripped jeans with your own hands.
What is required for work
To make ripped jeans with your own hands, you need to prepare the following tools:
- Jeans. Classic models with a minimum amount of elastane are ideal. The skinny model can also be used, but make sure the material is thick enough and will not tear too much. If the fabric overly hips, there is a possibility that the skin will bulge out of the slots, and this does not look aesthetically pleasing. Before you start cutting, jeans need to be washed and completely dried.
- Chalk, fine soap, a simple pencil or marker on the fabric. One of these items will help make the correct markup.
- Stationery knife or manicure scissors. Ordinary scissors are of little use: they make holes too big, but a sharp clerical knife is exactly what you need. In extreme cases, you can take manicure scissors, but this is less convenient.
- Safety pin or tweezers. They are needed in order to pull out unnecessary threads with jewelry precision and make a beautiful fringe.
- Grater or pumice. With their help, you can bring the appearance of the hole to perfection.
- Several sheets of cardboard or heavy wrapping paper. They will need to be placed under the top layer of fabric, which you will cut so as not to damage the bottom layer.
For the first time, it can be difficult to make ripped jeans yourself. Photos of step-by-step actions will help to understand this process.
Markup
This method is suitable for the production of both women's and men's ripped jeans , as well as for children. Before proceeding to cutting, it is necessary to accurately determine the location and size of future holes. Keep in mind that during wear, the fabric will wear out, and over time, the holes will become larger. Therefore, make the holes a little smaller than they should be in the end. If you use a marker for marking, make sure that it is washed off with water, otherwise the stripes may remain forever. This is especially important when you rip white jeans.
With your own hands (with a chalk, pencil or other tool), outline the location of the hole, its length, width, shape, proposed contour. To do this, put on your pants and bend your knees slightly. Always remember that before you cut once, you need to measure seven times, so do not rush to grab the knife. If you plan to cut several holes, do them gradually, one at a time.
Hole cutting technology
Insert cardboard or several layers of paper into the leg and place them under the place where you are going to cut. Using a stationery knife or manicure scissors, make several longitudinal parallel cuts at a distance of two centimeters from each other. The holes must remain strictly inside the marked contour. Denim fabric consists of two layers of thread: lower white and upper colored (blue, blue or black). Incisions must be made parallel to the white layer. Using tweezers, pull out a layer of colored threads arranged vertically. Then use a pin to go around the edge of the hole to give it a smooth, natural shape. Using the same method, make as many holes as necessary. To understand the process, consider how to make ripped jeans in the photo with your own hands. All actions are presented in stages.
Processing holes with a grater or pumice
Treat the resulting holes with a fine grater or pumice. Also, sandpaper is suitable for this purpose. Start gently rubbing the hole, starting from the edges, and continue the action until you reach the desired degree of wear. This step will allow you to give ripped jeans the naturalness inherent in expensive vintage models. Be careful and do not overdo it, otherwise the threads will crack up, the holes will expand significantly, so that the result will not be what you expected.
Ragged edge
The bottom edge can be left untouched, but with a fringe, the jeans look more interesting and fashionable. If you decide to still process this part, carefully cut the bottom edge with scissors. In the case when it is necessary to maintain the length of the legs, the seam can be dissolved and then ironed. Especially stylish looks asymmetrical edge, shortened in front and long at the back. The transition between levels in this case can be smooth or stepwise. Select the desired option and use the scissors to give the desired shape. Using a pin, pull out a few longitudinal threads to create a fringe, and then pumice over the edge to create a deliberate sloppiness.
Wash
Turn the trousers inside out, and then wash in any way convenient for you, with your hands or in the typewriter. Use a mild detergent, rinse thoroughly. After washing, squeeze the product slightly, but in no case do not unscrew it, and then dry to a damp state. Lay the jeans on the ironing board and iron them carefully. Now put on your updated outfit and evaluate the result. If something, for example, the shape of the holes or the size of the fringe, does not suit you, at this stage there is an opportunity to fix everything. Trim too long threads, adjust the contour, add a few new holes for balance. Please note that torn jeans get their final appearance only after washing, therefore, in no case is it recommended that you skip this step.
How to care for ripped jeans
Caring for aged jeans is not much different from usual. They should be washed in a delicate mode and, if possible, should not be twisted. When putting on your pants, be careful not to touch the cut holes with your fingers, otherwise you will tear the fabric. If the holes begin to expand over time, they should be fixed. To do this, turn the jeans inside out, manually or on a machine, lay a shallow seam along the contour of the gap. Make several parallel seams, if necessary. Choose threads of the same color as the jeans themselves.
Making the perfect ripped jeans with your own hands the first time can be difficult, especially if you do not have sewing skills. In this case, you need to be patient and be prepared that the process will take several hours, but the result will certainly please you. In no case, do not rush, and if in doubt, train on old unnecessary pants, which are not a pity to spoil and can be thrown without regret.