Interior doors are decorated with special coatings. As modern technologies are actively developing, new materials appear in the field of door construction. To date, 6 common types of door coverings are used: PVC, lamination, the use of veneer, tinting, staining and eco-veneering technology.
PVC coating
In the process of coating the interior door, a synthetic PVC film is used. This material is obtained by synthesis, in which salt and oil are involved. PVC film fully reproduces the pattern of wood, and not only visually, but also to the touch. The imitation of the wood structure is so high quality that it is difficult to distinguish such a coating from veneering. The frame of such an interior door is made of softwood bars, sheathed with MDF boards on top, and then PVC is glued with a film.
Advantages of PVC coating: high abrasion resistance, withstands temperature fluctuations, has a long service life, can be used in conditions of high humidity, so the doors are often installed in the bathroom. In the manufacture of interior doors with PVC coating, you can use any color palette.
Laminated coating
In the manufacture of the door frame, pine beams are used, which are subsequently sheathed on two sides with MDF panels, and the inner cavity is filled with corrugated cardboard. The surface of such a door is covered with a laminate. This polymer film imitates a pattern of the structure of a natural tree. The coating is carried out with laminate, which is a multilayer material. It is made from decorative paper that has been treated with melamine resins and high temperature using high pressure. After the material passed through electron radiation, it received a number of positive properties: resistance to ultraviolet and mechanical damage, abrasion, and minimal material care.
The interior door with lamination perfectly withstands climatic changes, does not deform, is inexpensive. Disadvantages: short service life, after mechanical damage the surface is very difficult to restore.
Veneered coating
Veneer is a thin section from the procurement of valuable species of wood alder, oak, walnut, cherry, wenge, beech, merbau. The veneer fully retains the wood cut pattern. Such material has natural beauty and high decorative properties.
A door with a veneered coating consists of a wooden frame (it is made of pine beams), sheathed with MDF panels, and veneered with external sheets. Veneering is the process of pasting the surface of a door leaf with veneer sheets by hot pressing and the use of binders. A high-tech varnish is used for surface treatment, thanks to which the veneer becomes resistant to wear and is not afraid of moisture.
Veneered doors have natural beauty, if necessary, they can be restored, they are not demanding to care for, and are much cheaper than the analogue of solid wood.
Eco-veneered coating
Such modern material as eco-veneer is produced using the latest technology. For the production of eco-veneers, vacuum, fine wood, a minimum amount of a binder are used. This material is actively used in the manufacture of furniture, door leafs, wall coverings. For products with eco-veneered coating, a presentable appearance and technology allows you to get the texture of any wood species. In appearance, such a coating is difficult to distinguish from a natural material.
Interior doors with an eco-veneered coating are not different in design from the other types described above. For the frame, pine bars are used, then they are trimmed with MDF panels, then the product is veneered with an ecointerline interval. Corrugated cardboard is used to fill the internal space.
Modern and classic materials are used to decorate interior doors - each consumer will find a suitable option.
Surface painting
During this process, a coating material is applied to the door leaf. This decoration method allows you to use a different color palette. Bold designers use a plurality of shades in the coloring of the doors.
Painting interior doors involves several types of work: polishing, priming, re-polishing, applying paintwork. In this case, you can count on the perfect coating, its long operation. Maintenance of a quality painted surface is minimal and simple.
Surface tinting
The technology of tinting implies the multilayer lacquer coating of the door leaf. This ensures the closure of pores in the wood, which increases the moisture resistance of the material.
Doors are painted using transparent, tinted or colored varnish.
The clear structure varnish is applied in several layers. To obtain tinting, color varnish is coated on the surface in several layers, and colorless varnish is applied last. The technology of colored coating involves the alternating alternation of varnish matte and shiny.
On the site
You can choose and buy interior doors with any type of coating and at a bargain price. The company offers a wide range of doors at a bargain price.