Quite often, modern consumers are trying to save money, so if they damage an inflatable boat made of polyvinyl chloride or shoes, they resort to repairing products. An excellent solution for this may be the “Liquid patch” for PVC, reviews of which you can read below. This material is also suitable for air mattresses, and is a polyvinyl chloride contained in a solvent.
Key Features Reviews
According to consumers, "Liquid patch" is quite easy to use, it is safe for human and animal health, as well as environmentally friendly. To repair the boat it will only be necessary to degrease the surface, and then shake the tube and open it.
According to consumers, the product must be applied in a thick layer to the damaged base and wait until the mixture dries. On sale you can find a "patch" in several colors, so it is considered a universal product, because you can use the material for different products. According to customers, repairs using this tool can be done quite easily and quickly.
Key Benefit Reviews
If you are interested in "Liquid patch" for PVC, it is recommended to read reviews about it first of all. Consumers claim that with this composition you can save money. This factor is due to the fact that similar materials are much more expensive. Among other things, the consumer saves time, because repairs can be carried out in a matter of minutes.
"Liquid patch", according to customers, is quite simple to purchase, as the company has a huge dealer network. On sale you can find the material in a wide range of colors, which is why it can be selected for application on almost any surface. Due to its ease of use, the product can be used at home. Among the primary colors should be highlighted:
- marsh;
- green;
- red;
- yellow;
- blue;
- light gray;
- white;
- the black;
- Violet;
- dark grey.
Additional properties
Before using the "Liquid patch" glue for PVC, it is recommended to read the reviews about it necessarily. In them, consumers mention a fairly high adhesion. The composition penetrates into the outer layer of the surface, creating a strong bond and increased bond strength. The material is resistant to ultraviolet rays. This compares it favorably with adhesives that can become cracked and peel off from exposure to ultraviolet radiation.
Consumers also like the fact that the composition 100% penetrates into the repaired product, thereby updating the PVC. This indicates vulcanization. Generally speaking, about a tool such as Liquid Latka glue for PVC, the reviews are pretty good. In them, consumers also mention elasticity. The main material after applying the adhesive retains its properties, even in severe frost, the products do not lose flexibility. Unique and material properties. It is the same polyvinyl chloride, only in liquid form. Consumers especially emphasize that the material is resistant to bending, scratching and ultraviolet. It is as durable and flexible as possible.
Why you should choose "Liquid patch"
Glue "Liquid patch" for PVC, the reviews of which you could read in the article, is also suitable for inflatable pools, awnings and other products. According to consumers, after repair, the inflatable products do not become worse or better than they were before the repair. In short, the work does not affect the new punctures and tears.
Unfortunately, today manufacturers have begun to forget about the operational qualities of manufactured goods. This issue is openly neglected today. As buyers emphasize, it has long been proven that glue is an aggressive polymer that can destroy the basis of tissue when exposed to ultraviolet light. As a result, using low-quality goods, you can just ruin the product being repaired.
It follows that glue released by an unscrupulous manufacturer can be a danger to damaged material. The "liquid patch" for PVC boats, reviews of which will be useful to the consumer, is a completely new product. On a molecular basis, it eliminates almost any defects.
Usage Reviews
The described adhesive is an innovative product, however, a positive result can be expected only with its proper use. According to customers, you can use the product after repair only after waiting a day or two after applying the glue. However, the composition will reach maximum strength only after 10 days. The final time will depend on the temperature of the environment.
Glue for boats “Liquid Latka” PVC, feedback on the experience of which is useful not only to home craftsmen, but also to specialists, should be used at a positive temperature. The mixture contains not only PVC, but also active reagents. First, the surface to be repaired must be well degreased, and the contents of the tube must be shaken well. Only after that it is possible to apply the patch to the place of the defect.
Buyers advise to pay attention to the fact that the cut should be processed using different technologies depending on the size. If this parameter does not exceed 3 cm, then additional measures should not be taken. Whereas if the cut is more than 3 cm, then it should be sewn at the first stage with a needle and thread. After gluing, the product can be used only after a day.
Temperature mode of use
"Liquid patch" for PVC, consumer reviews of which indicate a positive result, should be used in well-ventilated areas. The temperature should be 15 ° C or higher. Work is necessary away from direct sunlight. It is recommended to store the composition in a cool dark place, away from children. The mixture is flammable, so you need to use it away from fire. Gas vapors are volatile. The composition freezes at a temperature of -16 ° C.
Conclusion
On sale today you can find material that was developed by Russian specialists together with specialists from a foreign company of polymer materials. As a result, it was possible to obtain a new product, which at the molecular level is able to eliminate almost any defects on products from PVC fabrics.
"Liquid patch" for PVC is a suspension that quickly dissolves the top layer of the element and restores the material to its original state. In this case, all the necessary properties of the product remain at the same level. In the process of the chemical effect of the material on PVC, structures are mixed, but after drying, it is possible to obtain a chemically-welded monolithic compound.