A modern range of flooring materials can surprise an arbitrarily sophisticated consumer. He tirelessly replenished with new goods that amaze the imagination. However, the time-tested linoleum finds its fans today. It has many advantages, which attracts attention. Before purchasing it, you should familiarize yourself with its features and, if necessary, decide whether it is possible to lay this coating on an old, similar one.
Is it possible to lay linoleum on top of the old
If you are thinking about how to stick linoleum to linoleum, then you must have decided for yourself the question of removing the old coating. Laying a new material does not require the creation of a substrate, if you lay the coating in two layers, the floor will turn out to be warmer. However, experts still recommend removing the previous layer, only then you will eliminate the problems that may arise during operation.
When people decide how to glue linoleum to the floor, they think they can assess the condition of the rough coating after removing old materials. This belief is true. The condition of the screed must be checked and repaired if such a need arises. In the process of using the floor material, dirt and dust will certainly accumulate beneath it, mold and fungus can also occur. If you decide on how to glue linoleum to the floor, getting rid of the old coating, then this will eliminate the above troubles, as well as save new material. Among other things, this approach allows you to make the atmosphere in the house safer and healthier.
If the old coating has holes, swelling and cracks, all kinds of bumps, then the new linoleum will quickly become worthless. Although it cannot be called the most demanding material, it still needs a clean and even surface. This approach allows you to evenly distribute the load, eliminating possible damage to the coating from the inside.
If you have a question about how to glue linoleum to linoleum, then you must remember that this approach will not only make the floor warmer, but also soft. However, in this case, one should not always expect a positive result, since furniture legs will certainly begin to push through the surface. As practice shows, a material can be glued to a clean base more efficiently. How to stick linoleum, will be described below. But if you decide that the removal of the old layer will not be carried out, then you should consider the pros and cons, only then you can start laying the new finish coating on the old material. However, this is not worth doing if the previous layer was badly damaged and covered with waves. This may cause the new coating to repeat these differences and begin to tear.
The method of laying the new coating on the old
If, thinking about how to glue linoleum to linoleum, you still decide to use this technique, then the advantage of the technology is that you will not pick up old dirt and dust. You can use the old layer as an additional substrate. However, questions arise here about what to use for gluing, whether it is possible to use adhesive compositions in general, or whether it is best to prefer other methods of fixation. If you still decide to use the non-recommended technology in a room with an area of more than 20 m 2 , then we recommend that you consider the universal adhesive FORBO 525 EUROSTAR BASIC. In its manufacture, a solvent is used, it has increased adhesive capabilities and is easy to apply with a notched trowel.
Some believe that fixing new linoleum with furniture and baseboards is not enough, while you can use the option of using double-sided tape. Special-purpose adhesive tape allows you to glue the material between the layers. But when applying glue, it is best to let the composition dry for several days, it will take about 4 days.
Alternative options for laying old coatings on new ones
If you are still thinking about how to glue linoleum to linoleum, then you can apply latex glue, as well as the Bustilat lime compound. PVC glue is also suitable for fleecy substrates, which is applied using a notched trowel. If you are unable to lay one piece of material over the entire area of the room, then you need to fasten the canvas with transparent cold welding.
For reference
When deciding to use glue, you need to consider the prospects when you have to change the flooring again. In this case, you will spend a lot of money to dismantle the glued cake. If you still do not want to remove the old layer, then you can do without glue, and on an area of 20 m 2 this solution will be the most suitable. With more impressive areas, you can use clamping skirting boards. With the help of objects you can fix the roll material.
Laying linoleum on a clean floor
Many home masters have often thought about replacing the floor, what is better to do in this case and how. Should I stick linoleum or lay it just like that, crushing it with skirting boards? If a decision is made in favor of the first option, then a reaction adhesive may be used for this. They are a complex chemical compound that is created on the basis of epoxy resin and polyurethane. After the glue reacts with the coating, firmly bonding it to the surface, a hard intermediate layer is obtained, characterized by durability, resistance to mechanical stress and water resistance.
If you are faced with the question of how to glue linoleum to a concrete floor, then a reaction composition that is excellent for fabric-based material can be used. Such mixtures are simply indispensable for the flooring of commercial linoleum, which will be operated in production facilities.
Methodology
Reaction glue will help to lay commercial or household linoleum by gluing it at the joints. However, the material must be cut taking into account the combination of the pattern. As a result, it will be possible to obtain an almost imperceptible transparent seam that will be detected only by touch.
Along the edge of the composition is applied with a deviation from it. After the canvases are laid, rolled with a roller, and then you can proceed with the installation of the second half of the canvas. If you are thinking about how you can glue linoleum, then as an alternative solution, a two-component polyurethane composition is still used, with which you can get a tough and durable bond. Sometimes a water-dispersion composition is also used, which is odorless and environmentally friendly.
How to remove linoleum
If you faced the problem of how to remove glued linoleum, then you can use the technique, which involves the use of a mechanical method. The coating should be moistened with a warm soapy solution, which will quickly get rid of the adhesive layer.