If you are the owner of suburban housing or a private house within the city, then belong to the number of those who try to make the atmosphere around them as comfortable as possible. It is impossible or rather difficult to achieve this goal if you do not use natural wood, because concrete and ceramics are not able to convey such a pleasant tactile sensations that arise when in contact with natural wood, and its natural beauty.
It is she who often takes as the basis of the floor, which for long-term operation is covered with protective compounds. And here it is important to take into account the fact that the material should not lose the ability to breathe, because it is so important to exclude the beginning of the development of moldy formations.
The need to use oil
Despite the fact that the beauty of this material is rather fragile, it is gaining more and more popularity, which is understandable, because from the point of view of the ratio of operational characteristics and cost, this option is an ideal choice. However, any wood used outdoors requires protection from fungus, moisture, ultraviolet radiation, rot and wind. Even if you use denser coniferous species of wood, they will require proper care, which will be able to extend the life of the products.
Solution
The market today presents many ways to protect and process wood, which can improve the quality of the material. But among such solutions there are not so many options that allow you to maintain valuable wood quality and naturalness. Oils and varnishes used for indoor processing cannot be used in open areas, because they will not provide adequate protection. That is why it is best to choose oil for terraces, which can prevent deformation and give a special shine that emphasizes the natural structure.
The main varieties of oils for the terrace floor
Some consumers are wondering why to use oil when it is possible to coat wood with varnish. However, the latter processing option has a significant drawback, which is expressed in the airtightness of the formed layer. Over time, the surface of the paintwork is abraded, exposing the wood.
But terrace oil does not create a durable film, does not interfere with air exchange and protects the material, deeply impregnating it from the inside. The construction market today offers a fairly wide range of oils, including:
- oils with natural wax;
- oils with antibacterial additives;
- oils, which include colorants;
- anti-slip oil formulations.
Characteristics of Osmo Anti-Rutsch Terrace Oil
If you need terrace oil, then you can choose the above, which is used as a topcoat. At the heart of vegetable oils, namely:
- soybean;
- sunflower;
- flaxseed;
- honeycomb.
Organic water-repellent additives are added to the ingredients, which have a high density and are evenly distributed in the mixture, preventing slipping after drying. This solution can be used after processing wood from rot, mold and blue.
Applying the oil is quite simple, it does not dry out during processing. The coating is silky-matte, does not spread when applied, and after drying it does not peel and does not peel off. This terrace oil can be used without first grinding the surface. The composition is resistant to ultraviolet radiation, protects the material from changes in temperature and humidity and gives it water-repellent characteristics, prevents the appearance of rot, blue and mold.
Features of use and oil consumption Osmo Anti-Rutsch
For effective protection of previously painted wood, it is recommended to apply the oil in two layers, as a finish coating, the composition is applied in one layer. If the air humidity does not exceed 50%, and the ambient temperature is approximately equal to +23 ° C, then the drying time will vary from 8 to 10 hours. Consumption will depend on the properties and structure of the wood, as well as on the preparation of the base. One liter will be enough to treat 24 m 2 of the surface if the oil has been applied in one coat.
Neomid Terrace Oil Reviews
This oil impregnation is a high-quality wood-protecting mixture, which is made on the basis of natural oils. Among the ingredients are fungicidal and technological additives, as well as polymerized oil. There is a UV filter in the mixture, which guarantees protection against solar radiation. The product can be used for primary processing of wood, as well as for repairing a surface on which oil has already been applied.
This terrace oil, reviews of which are recommended to be read before purchasing the goods, according to customers, is resistant to household detergents and moisture. The service life of wood is increased, the appearance of the material remains at its original level.
According to buyers, the ease of its application acts as a feature of the oil. After drying, the layer does not peel and does not exfoliate. Users are advised to clean the surface before application, freeing it from wax and contaminants, as well as previously applied paints and varnishes. If you plan to process hard varieties of wood, then they must first be cleaned of resin and natural oils, using rags soaked in organic solution. Consumers say that before applying the oil, the base must be well dried, because the moisture content in the wood should be no more than 18%.
Characteristics of Neomid oil
Oil for terraces "Neomid" increases the resistance of the material to ultraviolet light, prevents the formation of fungi, blueness and mold, gives the surface water-repellent characteristics. Application should be done with a brush, evenly distributing the composition along the wood fibers. The number of layers can reach two, but sometimes it is required to completely impregnate the material. An hour after application, excess oil can be removed using a dry cloth. Work must be carried out if the thermometer has dropped below +10 ° C.
On sticking, the surface will dry after 6 hours, and the final drying should be expected after 24 hours if the environmental conditions are met. Thus, the temperature should be above +20 ° C, the relative humidity should be about 65% or lower. Neomid Terrace Oil will be consumed in a volume of 1 liter for every 10 m 2 of surface. Sometimes the flow rate decreases, and this amount of oil is enough for 20 m 2 . After completion of work, tools and containers should be cleaned with white spirit.
Characteristics Tikkurila VALTTI
"Tikkurila" - terrace oil, which is a colorless composition applied to a wooden surface in two layers with a brush or sponge. In order to give the oil a shade, a colorant should be added to it. The mixture is able to improve the adhesion quality of old surfaces. It can be used for any type of wood. The absorption time is 40 minutes, the mixture will dry after 8 hours, and the working temperature of the application can vary from +20 to +22 ° C.
Pinotex oil
Pinotex is a terrace oil, which is also quite popular today. Application can be carried out not only with a brush and sponge, but also with a spray gun. The oil is durable, does not form a crust on the surface after drying. Antibacterial components are added to the ingredients during the manufacturing process. The oil is well suited for soft wood species that need deep impregnation. This oil can be decorated by adding a colorant. Absorption time is 40 minutes, you can wait for full drying after 6 hours, but only if the ambient temperature will show from +22 to +23 ° .
Features of the use of oil V33
Terrace oil V33 should be mixed before application and wood prepared. The surface must be absolutely dry and clean. If you have to work with hard wood, then you need to polish it well, and then remove all the dust. If it is necessary to process old wood, then it must be pre-cleaned using V33.
When there is a need to impregnate previously untreated wood, the first layer is applied so that the material can be abundantly impregnated. After 15 minutes, another layer of oil must be applied to the damp surface, waiting after another 15 minutes. If after this the wood does not absorb oil, you can be sure that the protection is as effective as possible. Using a lint-free cloth, it is necessary to rid the surface of excess oil and leave to dry completely, which will take 24 hours. If the old coating is to be treated, then it is not necessary to apply the composition to the entire surface area. It will be enough to apply 2 layers on worn areas.
Application Features Alpina
Alpina Terrace Oil has a silky gloss and can be used both outdoors and indoors. Shades of wood can be tinted by computer technology. Prior to application, the surface must be free of contaminants, tar and dust using an appropriate tool. The surface is degreased, the oil is applied exclusively to dry wood, which has no enamel and varnish coating.
The product must be mixed before use, a brush should be used during work. It is necessary to achieve saturation of the surface. Do not start work if the thermometer has dropped below +8 ° C. Alpina is a terrace oil that should be removed with a rag after 15 minutes, this applies to excess that has not been absorbed. On the end sides and edges, the application should be especially intense, if necessary 2 layers should be applied. The tool is cleaned with soap and water.
Conclusion
If you protect wooden surfaces with special oil, this will significantly extend the period of their use. It is important to choose the right composition, given the place of application of the coating. The floor of the open veranda and garden furniture need special protection, because aggressive moisture, sun and wind constantly influence their surface. Therefore, it is recommended to choose mixtures in which the wax content is high.