Drywall made of drywall: installation features and recommendations

Plasterboard false walls firmly entered into fashion. In many houses, they are built as necessary, which occurs during the redevelopment of living rooms. They are an excellent option for the manufacture of partitions, as well as to simulate walls. For such cases, drywall is used . Drywall made of drywall is an interesting design decision. It usually occurs when repairing an apartment. The interior is immediately transformed. How to make it? Consider in our article today.

What materials are needed?

Before building a drywall from drywall, it is important to study how this type of work is carried out. It is also worth taking seriously the order of manufacturing the wall. All necessary tools and materials should be purchased in advance.

Before you begin installing the wall, it is worth checking whether all materials are available:

1. You will need drywall sheets. The amount is easy to calculate based on the area that needs to be closed.
2. For work, special mounting profiles are needed. It is allowed to replace them with wooden bars with a certain section.
3. It is necessary to prepare self-tapping screws for metal and wood. For the construction will require more nails and dowels.
4. Do not forget about the putty stage. For him, you need to buy a primer for interior decoration and putty. Ready-made solutions can be purchased, saving time on mixing.

What tools are needed?

In order for the installation of a false wall made of drywall to go quickly and efficiently, you will need tools:

1. Hammer (you can also use a wooden mallet).
2. Hacksaw for metal. Some use an electric jigsaw for this work.
3. Do not do without an electric drill. A hammer is needed in the first stages of work. He punches the necessary holes at the assembly stage of the proposed frame. You will need special drills for concrete. It is possible to use a hammer drill. A screwdriver will be needed. It is used at the stage of assembling the frame of the future wall and in the process of plating it with drywall. If it is not, then a low-speed drill will do.
4. The construction level will help to avoid inaccuracies.
5. A construction knife is useful, but can be replaced with a clerical knife, as well as tape measure.

How to prepare the surface

Before you build a false wall from drywall with your own hands, it is necessary to carry out preparatory work. It is important to process the surface, which will be in the role of the base. In this case, the frame plays the role of the surface. It is erected from a base metal profile. It is allowed to use wooden bars.

It is worth thinking in advance about how you will place communications in a false wall made of drywall. If soundproofing is required, then it is better to worry about this in advance.

There are two types of frame that are used as a base. The first option is a standard wood crate. It is used because of the low price. Attracts this type also ease of installation.

The second type includes a metal structure. It is built from profiles of a specific size.

The advantages of metal frames

The main advantage of using this type of base is the durability of the structure. A wooden crate, on the other hand, can quickly deteriorate. Metal parts are resistant to moisture and moisture. It is not necessary to further protect such a frame.

An interesting feature of the profiles is the ability to easily recover from mechanical damage. They are often taken for reuse. The disadvantages of such elements include only the high price for them. Wooden counterparts are much cheaper than metal ones.

How is the installation of the structure?

To perform installation, it is necessary to follow the algorithm of actions:

1. It is necessary to draw a marking under the supporting surfaces of the floor, as well as the ceiling, using guide profiles.
2. It is necessary to draw a marking of the places where the brackets will be. They are installed on the main walls.
3. The next step is to mount the bracket and profile. They should be fixed on previously prepared marks for them.
4. Install vertical racks. They are placed along the markings, using the level. These racks will set the position for the door racks.
5. If doors are provided in the drywall of drywall, then their place must be determined in advance. It is also necessary to install the mounts in advance.

Finishing stage

When a drywall is made of drywall, the finishing step is important. It occurs after the frame has been installed. It is necessary to check whether it is well fixed. After that, you can start finishing work. In order for the frame lining to work out, you must follow the instructions:

1. Prepare blanks (drywall sheets). They should already have markup for the future frame.
2. After preparation, the sheets are placed next to the wall in sequence, as they will be mounted on the frame.
3. The fastening of blanks begins, as a rule, to the main wall. After comes the finishing of the entire installed frame. When the grout is finished, it is important that the seams and screws are invisible on the resulting wall.
4. The design is fixed with screws, leave a maximum of 25 centimeters indent. It is important to immerse self-tapping heads in the material.
5. The last step is grouting. They are obtained at the corners of drywall elements. After eliminated irregularities and defects of the false wall. Mixture for grouting covers the screws. To sand the surface, a fine sandpaper is enough. Upon completion of work should get a flat surface. There should not be any flaws on it. After the finished surface can be puttied.

Professionals Recommendations

To make a false wall made of drywall, you must:

1. Do not use drywall in homes with high humidity. The level should not be higher than 85%. The temperature in the room should not fall below minus 10 degrees.
2. Pre-ventilate the room where the installation of false walls from drywall will take place. The purpose of ventilation is to lower the temperature in the room. Installation should only take place in ventilated areas.
3. Exclude the appearance of rust spots from self-tapping screws on the mounted surface. Divorces will be difficult to eliminate.
4. Do not save on building materials. Better to take a quality product. This will increase the life of the structure.

Walls

There are many options for erecting drywall walls. Often there is a design of a false wall made of drywall at the window. This design solution is created for zoning the room. Perhaps the construction is supposed to create a niche in the wall into which the backlight will be inserted.

The false wall made of plasterboard in the kitchen looks beautiful. Some people separate the meal area from the part of the room where the food is prepared. The wall looks like an original element of decor. It is decorated with watches, paintings.

Does the construction support sound insulation?

Many people wonder how to make a false wall from drywall so that the resulting room has good sound insulation. These issues are relevant for young families living in small apartments with children. By the wall they want to fence off a place for the baby so as not to disturb his sleep. Sound insulation is possible if the wall is sealed with special materials before starting work.

What are the possible nuances in the work?

If in the future it is planned to fix plinths or the apartment owners want stretch ceilings, then blanks from wooden battens are needed. They are laid with a guide profile immediately during work. Mounting around the perimeter of the frame is possible. In order not to forget their location, you can draw a diagram. On it, mark the places of bookmarks. After the frame is finally mounted, you can begin to work with sheets of drywall.

As for the lining technique, you can work by analogy with the GLK mount. The mount goes from the bottom corner, towards the profile. It is important to fix the sheet on top. Only after this is it possible to attach it to the racks of the frame.

An original solution is to use unusual shapes (for example, a plasterboard arch). Some specifically round corners. Then the frame is initially required to produce non-standard shapes. Drywall is specially bent to obtain the desired angle.

Conclusion

So, we figured out how to make a false wall from drywall. As you can see, this operation can be done with your own hands. But you need to strictly follow the instructions and adhere to the recommendations of specialists. This is the only way to get a quality result.