Not so long ago, warm floors could only be found in the premises of public buildings for special purposes. Already today, such systems are widespread among private consumers. They are on sale in a wide range. Reviews of warm floors allow you to understand which model to give preference.
Water Floor Reviews
Such heating will most effectively be on an area of more than 30 m 2 , since the system is notable for low operating costs. Water systems are suitable for private houses with autonomous boilers. If you want to equip a warm water floor, reviews about it are worth reading. In them, consumers note that such an arrangement is undesirable in an apartment, because its work will be accompanied by a change in hydraulic resistance.
Consumers emphasize that the initial cost of installing a water floor heating is quite large, but if it comes to a large area, energy can be saved by 15%. Customers also like the fire safety of such systems, as well as the ability to arrange furniture, regardless of the location of the pipes.
You can use such heating as a primary or secondary system. It has a long service life, which depends on the technical characteristics of the pipes. If the house is disconnected from electricity, the water floor, as consumers emphasize, will give off heat, but only if the boiler is non-volatile.
Reviews of electric underfloor heating
After reading reviews of underfloor heating, you can understand that electrical systems are good in that they have a wide area of use, so they are often installed in bathrooms, bathrooms and kitchens. This is because installation in this case is cheaper than a water floor. Such a system is recommended to be done in a new apartment, which is especially true for the case when finishing work has not yet begun.
By type of heating, electrical systems can be infrared or conventional. In the latter case, the floor will be based on a heating cable, while infrared systems are film floors. Each of these varieties is characterized by its own characteristics.
Reviews on self-regulating cables and heating mats
The underfloor heating is based on a cable that is laid by a snake. The design also provides for a thermostat. According to the principle of operation, cables can be different, but self-regulating have the most advantages. They are made of a polymer matrix and, according to customers, have reliability and versatility.
The first feature is expressed in the exclusion of the possibility of overheating. This is due to the lack of a coupling. As for versatility, it should be mentioned here that the cable can be laid under natural floor coverings.
After reading reviews of underfloor heating, you will note for yourself that the heating mat attracts consumers because it has an affordable cost and is easy to install. Such products are often compared with cable, but the former are cheaper, have a self-adhesive base and are available in rolls. The last two factors, according to consumers, facilitate installation.
Initially, such systems were developed for rooms where it is not possible to equip a multilayer cake inherent in a cable system. This explains that the main areas of use of mats are:
- bathrooms;
- kitchens;
- bathrooms.
They often use ceramic tiles as flooring. Consumers like that heating mats are available today for rooms where there is no way to raise the floor level by more than 1 cm. If necessary, the grid can be cut into separate fragments, the integrity of the cable will not be violated. Material is laid on the area of any configuration.
Film flooring reviews
After reading reviews of film underfloor heating, you can understand that they provide a high degree of protection and water resistance, because they consist of carbon strips that are connected to each other by special contacts and a copper bus. Buyers emphasize that the heating elements are laminated with electrical polyester, which guarantees protection from moisture.
After reading the reviews about the infrared warm field, you will notice a wide area of use. After all, such systems are often found in rooms without stationary heating. You can use such systems during the off-season, when the batteries are disconnected. This floor can heat the walls and ceiling.
Film systems are common in apartments and houses, as well as hospitals, hotels and kindergartens. This applies to all facilities where "healthy heat" is required. Considering many factors, most consumers believe that infrared floors can be called the best solution, because they are economical, easy to install, resistant to mechanical damage, mobile, flexible and safe.
Film Flooring Information
Before you purchase an electric underfloor heating, reviews about such a system must be read. If we are talking about the film version, then it will be based on the operation of a heating carbon film. In the process of connecting to the electric network, it begins to emit infrared rays and anions. The role of the emitter is performed by a carbon paste, which is applied in the form of even or curved parallel strips.
Consumer Opinions
According to customers, such underfloor heating, reviews of which can be positive, have hidden contacts, therefore, before installation it is necessary to test the performance of the system. You must also follow the process of laying the flooring. Buyers also consider the use of a connector, which provides contact between the wire and the film, to be a minus. If you decide to use ceramic tile as a topcoat, then it is laid using a special adhesive that is applied with a thickness of 15 mm or more.
Which floor under the tile to choose
If you want to lay a warm floor under the tile, reviews on several options for such systems must be read. You can implement the idea with a single-core, two-core or ultra-thin cable. The latter is placed in a screed, and the electricity is connected through a thermostat.
It is possible to use a sand-cement screed for flooring on the basis of single-core or two-core cables. If you want to choose the best warm floor, consumer reviews must first be read. From them you can find out that a single-core system will cost less, but it will definitely need to be returned to the thermostat, which cannot be said about a twin-core cable that can be used in any room layout. If you install the screed, it will add an additional 5 cm to the floor, and after installing the tile, the floor will become 6 cm higher. Cement-sand hides the height, but accumulates heat during operation, preserving energy resources.
Some consumers, according to them, prefer mats that do not require additional screed installation. The cable is ultra-thin, it is laid on a polymer mesh base, it is characterized by insulation resistance and high strength. Such a mat during installation is laid in a layer of glue on an old screed. The floor level will rise only by 1.5 cm, which will be the height of the layer of glue and tile. Additional thermal insulation is not required.
Finally
Choosing a warm floor is a fairly responsible process, so when choosing it, you must be guided by some rules. At the first stage, you must decide on the type of heating system, and also decide whether it will be auxiliary or main. In this case, the characteristics and features of the room, the properties of the electrical wiring, as well as the type of flooring are taken into account. Sometimes it is necessary to use not only suitable finishing material, but also special glue.