Configuring the access point and router often becomes a serious problem for novice users. According to the manufacturers themselves, setting up a wireless network is simple. In fact, everything is much more complicated, and even experienced users can be a little confused. Let's try to figure out how to connect two computers to a network, select an access point, etc. Many are so far from this question that even the presence of a network causes them positive emotions, not to mention its quality. But we can make this connection reliable, so we believe that you should know this little secret.
It often happens that the main stumbling block is the Wi-Fi standard, which interferes with the transfer of multimedia. Only compliance with the 802.11n standard can provide the highest speed when transferring files and watching HD-video. The transfer rate for a connection according to this standard is 300 Mbps. If there is no need for such speed, then it is better to choose a network according to the 802.11g standard, which provides speeds of up to 54 Mbps. It will be enough for a high speed Internet connection.
Oddly enough, but one, and the second, and the third network standard Wi-Fi is at a frequency of 2.4 GHz. Setting up a Wi-Fi network is therefore slightly simplified. But then there are other problems. Due to the fact that most microwave ovens, cordless telephones and wireless interface extenders operate at the same frequency, the level of interference increases significantly. There is another problem that is associated with the environment in which this signal passes - and this is nothing but structural elements. It may even be the person himself. It is advisable to place the router in such a place so that other objects do not interfere with data transfer. After all, it is not enough to know how to connect two computers to a network, but it is important to know how to make an optimal environment for transferring data between them.
To connect the router and the computer you need to use a special cable. In order not to do unnecessary work in the future, make sure that the connection is established and the computer recognizes the router. You may be mistaken in choosing the correct entry and exit, so if there is no connection, then do not hesitate to double-check this fact. The main document to rely on when setting up a Wi-Fi router after connecting to your computer or laptop is the manual. All addresses that are worth entering are clearly spelled out there.
The next step will be to enter data, namely login and password. The instructions on this subject do not indicate anything, as well as on how to connect two computers to the network, but this is normal. Many standard routers use admin / admin or admin / password pairs. If you change them, then perhaps you will succeed.
In order to spread it over the Internet, you need to use the Internet cable and connect it to the external interface on the router. Following this, specify in the router settings the provider interface settings that are in the contract. If there is none, then you need to contact support. There’s no need to ask how to connect two computers to the network. Such questions will not be answered, but it’s worth clarifying in the case.
Setting up a network between two computers is much easier than you think. Just plug in the cables and voila! With Wi-Fi, too, everything is done quite simply - you need to create a network on one of the devices, and connect to it from the other. Data transfer in the second case is slower, but if you need to connect computers at a greater distance, then this is the only way out. The main thing is not to be afraid to ruin something. Try, connect, decide, and you will succeed! And if not, then for this there is a "Reset" button on the back of the router.