How to set up a D-Link router? detailed instructions

The D-Link range of wireless routers has made its brand known throughout the world, as the devices do a good job of ensuring smooth operation of both wired and wireless networks. They provide support for the WEP, WPA TM, and WPA2 TM security standards, which ensure that users get the best network encryption that can prevent possible attacks from the Internet.

Recent models use dual active firewalls to protect important user data. The routers of this line and their software are quite universal, so the user will not puzzle over how to configure the new model of D-Link router.

DIR-300 tuning utility

Dlink DIR-300 routers include a very simple firewall that helps protect your home network from unwanted Internet access. Since this firewall blocks incoming connections, you may need to open a port through it for certain games and applications. This process of opening a port is often called port forwarding, as the port is forwarded from the Internet to its home network.

Before setting up the D-Link Dir 300 router, do the following:

1. Set a static IP address on the computer to which you want to forward the port.
2. Included in the DIR-300.
3. Go to the port forwarding section.
4. Open the Advanced tab.
5. Create a record.

For some users, these steps may seem difficult, so experts recommend port forwarding using Network Utilities, which is simpler and better. It is important to configure a static IP in the device. This ensures that the ports remain open even after rebooting the device. To do this, use another free program to set a static IP address:

1. Before setting up a D-Link Dir 300 router, log into it using any web browser: Chrome, Mozilla, Internet Explorer or Edge.
2. Find the string and contribute IP. The default value is: 192.168.0.1
3. After the IP address, you can press Enter.
4. If all goes well, the user will see the following screen.

The default username is admin. Password: blank. If this does not work, go to the "Default D-Link Router Passwords" page or use the instructions for resetting your password before setting up the D-Link router back to the factory settings. Now you need to find the port forwarding section.

Here's how to do it. Starting on the first page of the device:

1. Click the “Advanced” link at the top of the page. Here are the forwarding ports for Xbox Live: TCP ports 3074 and UDP 3074.
2. Make sure the Enable checkbox is checked.
3. Enter the name of the program in the "Name" field. If one port is forwarded, enter this port number both in the public port and in both Private Ports.
4. In the "Traffic type" list, select the protocol type of the ports that are forwarded.
5. Next, before setting up the D-Link dsl router, click “Save” at the top of the screen to save the changes.
6. Now that the Dlink DIR-300 ports are redirected, you need to check whether the ports are sent correctly.
7. To check if the port is redirected correctly, you can use the Network Utilities tool, which includes the free Open Port Checker.

The Open Port Validation Tool is the only Internet port validation tool with guaranteed results.

Performing the first setup

The first setup of the router is a very important event. Illiterate operator actions can not only significantly slow down the Internet transfer rate, but also completely block it. The order of operations:

1. Before setting up a Wi-fi D-Link Dir router, click the “Setup Wizard”. This will automatically configure and protect your network in just a few minutes.
2. If the button is not visible, you need to go to the "Settings" tab.
3. Press the button “Launch Internet Connection Wizard”. This will start the process of setting up the Internet connection of the router and the administrator account and “Next” to continue.
4. Create an administrator password, especially if you are setting up a wireless network, and make sure that the password is securely saved.
5. If the password is forgotten, you will have to reset the router. Before setting up a D-Link router, set the time zone. You must specify the current time zone for accurate logs and time parameters. Select the correct time zone from the drop-down menu.
6. Choose the type of internet connection.
7. Most home users connecting via cable or DSL choose the first option (DHCP Connection).
8. Click “Clone Your MAC Address” (if empty).
9. For most users, this field is already filled in; they can ignore the host name field if not specified by their provider.
10. Save settings.
11. Check connection.

Wireless connection

Before setting up a D-Link Wifi router, first click the “Network” icon in the system tray and find the name of the network associated with the router. It is usually written on a configuration card packaged with the device. By default, this is dlink, followed by a short string of numbers. Then enter the password or network key and click "Connect". Router Setup:

1. Open a browser and enter IP 192.168.0.1 of models 524 and 624. For many models, including the 2604T, it is 192.168.1.1.
2. Enter the username and password and click OK. Usually the name is admin, unless otherwise specified in the instructions. For AirPlus Xtreme, including models 524 and 624, it should be left blank. For 2640T - admin.
3. Run the installation wizard to configure the router. It automatically selects most of the settings based on the standard default values ​​for the existing type and asks the user a number of questions for further network settings.
4. Before setting up a D-Link Wifi router, select the radial button next to the type of connection. Most cable modem users should select DHCP if a static IP address is required, in which case Static should be selected.
5. Most DSL and ADSL users should choose PPPoE, after which they will be asked to enter the data provided by the Internet service provider.
6. Click “Next” to continue.
7. Enter a new network name for the wireless network. The name should be memorable. A password is usually a combination of memorable letters or numbers.
8. Select a time zone from the drop-down menu. Click “Next” to complete the setup. Click “Save” or “Restore” on the “Complete Settings” screen.
9. Before setting up the D-Link router, reboot it and you can connect the PC to the new wireless network.

Remote Security Management DIR-615

The first thing to do is turn off the remote control. By default, Remote Management is always disabled. If the user does not need to have remote control on his device, he is recommended to disable all remote control of any type. Before you configure the D-Link Dir 615 router, perform the following operations:

1. Click “Service”. All SSH and Telnet management is disabled by default.
2. Click "Save" after completion.
3. Sometimes it is recommended to perform a firmware update.

After updating the firmware, it may be necessary to reboot and reconfigure the device. Before setting up the D-Link 615 router, it is recommended that you obtain your Unifi username and password from your Internet provider. Procedure:

1. Download any firmware version. Experts recommend version 7.19, if it is convenient for the user.
2. Restore factory settings and reconfigure the device. This firmware fixes a security issue where users can retrieve a password remotely without logging in.
3. Before setting up a D-Link Dir router, it is recommended that you visit the D-Link support service to download.
4. Click “Service” - “Firmware Update”.
5. Click “Select File” to select the files that you downloaded.
6. Click "Download", wait until the firmware update is completed. Tr-069 is an ISP feature designed to update and serve customers when a customer encounters difficulties. ISP also uses these tools to update device firmware when a security problem is detected.
7. Click “Advanced” - “TR-069”.
8. Mark the checkbox “Enable TR-069”.
9. Click "Save" after completion.

Integrated DSL Modem

Wireless D-Link has a convenient installation wizard to help you complete the setup. Previously, a modem is connected to it, and the PC is connected to the network, and the installation wizard starts. The process is slightly different depending on the type of device used. Connection procedure with integrated DSL modem:

1. Connect the adapter to the device and to a power outlet or a power outlet. A power adapter is supplied.
2. Run the Ethernet cable from the modem to the WAN port. This port is often colored yellow to distinguish it from outgoing Ethernet ports, but the D-Link 524 and D-Link 624 have a black WAN port. D-Link DSL 2640T, equipped with a built-in DSL modem.
3. You need to connect the telephone cable from the telephone wall jack to the DSL port on the D-Link 2640T.
4. Wait until the power and WAN status light comes on. It only takes a few seconds.
5. Connect the PC to the router.
6. Connect the Ethernet cable to the Ethernet port on the PC and to the Ethernet port on the router. You can use any of the Ethernet ports on the device, with the exception of the WAN port, which must be connected to the modem.

Access to the WBR-2310 Router

In order to gain access, they first enter 192.168.0.1 into the browser line on the PC. When downloading this address, you will be prompted to enter information about the router. If this does not load the configuration page, you must verify that the computer is simply connected to the router and not to another network. If the configuration page still does not load, it is most likely used by someone else, and the default address has been changed.

A reboot will be required by holding the Reset button on the back of the router for about ten seconds. This will reset the device to the default settings. Next, they enter “admin” as the username and leave the “Password” blank. This is the default information for the router.

If it does not work, it means that someone else has changed the login information. You can reset the router. After the reset, you can log in with the default login information.

Security Mode WPA2

The main purpose of the router is to create a wireless network. Proper creation and distribution of Wi-Fi is not only the main condition for high-quality viewing of home video, but also network security. Before setting up a D-Link 300 wifi router, after standard startup procedures go to the “Settings” tab and enter a name for the network. It should not contain any personal information, as it will be publicly available. Next, select “WPA2” as “Security Mode”.

This is the safest way to transmit wirelessly and does not require additional user effort regarding legacy WEP. A strong WPA2 password is almost impossible to crack, and a WEP password can be cracked in less than thirty minutes. Only WPA or WEP is selected if older devices that support only these protocols are installed. To configure the D-Link Dir 300 wifi router, create a strong password.

Anyone who can unauthorizedly connect to a wireless network can cause serious damage to it when the devices are not protected. Next, click the "Save Settings" button, and the wireless network settings will be saved, and the wireless network will be turned on. This may take thirty seconds to a minute.

Broadband

D-Link Introduces New D-Link DIR-605 Fuzion Broadband Aggregation Router The device is designed to serve small and medium-sized businesses. Multiple - low-cost broadband lines that integrate efficiently to function as a single unit, providing a fast and reliable Internet connection. Several types of broadband services (DSL, Cable, etc.) can be combined to increase the reliability of your Internet connection. This flexibility makes it ideal for most installations, including primary or remote locations.

Fuzion's router and broadband aggregation service are widely used with a web browser and an internet connection to connect to a secure internet portal. The online installation wizard will guide the administrator through this process. The Fuzion Broadband Aggregation Portal enables users to manage Fuzion routers from anywhere.

Access is as simple as opening a web browser and logging into an online account on the official website. Then you can make changes to the security system, add and remove individual network users, view graphical reports and much more - all from home, office or on the go. You can receive alerts via email or HTTP. All traffic exchanged with the Fuzion portal is securely encrypted.

Wireless LAN access is provided by WPA / WPA2. The Fuzion Broadband Aggregation Router provides the administrator with everything needed to remotely manage the broadband aggregation service in local or remote locations, which reduces the complexity of supporting costly IT support in place.

VPI ROSTELECOM Configuration

The question of how to set up a D-Link Rostelecom router is being sounded more often today, since the services of this operator cover an increasingly large geographical territory. If the traditional login scheme is not a concern for most users, then they do not always understand the procedure for configuring the VPI configuration. Procedure:

1. Configure VPI, user name and password in the “Connections” tab. After that, the direct configuration of the router will begin, and the correctness of the entered data will affect its smooth operation. The main type of Rostelecom connection is the PPPoE connection.
2. To start the installation process, click "Connect Internet", and then "Add a new connection." Selecting - PPPoE.
3. The router assigns a “Connection Name” and then proceeds to “Next.”
4. Before setting up the D-Link 300 router, VPI and VCI parameters are entered in the window, which depend on the user's region.
5. The data should be taken from a representative of Rostelecom.
6. Enter the values ​​for PPP, as well as the contract data below: name and password, paying attention to case, when entering data, they should be written exactly the same as in the contract.
7. Click “Next” and go to “Miscellaneous” to make sure that the NAT and Firewall elements are enabled and that the GMP mark is removed.
8. Click on "Next" again.

Guest network with D-Link routers

The user is always worried when a guest asks him to connect to his home wireless network. Today it is possible. To do this, include a common feature in new routers called guest zones. Guest areas, as mentioned by D-Link, provide routers with the ability to run two wireless networks that are completely isolated from each other but can share an Internet connection. Thus, prevent unwanted access to computers, files and information from guests.

To enable this feature on D-Link routers, follow the instructions below, for example, the software and hardware used: D-Link DIR-655 Wireless Router version A4:

1. Open a browser and go to the page http://192.168.0.1.
2. Enter the credentials of your router and click "Login". After entering the system, click "Advanced" in the top menu. A menu will appear on the left, click “Guest Area”.
3. Select the Enable guest zone check box and select a schedule from the drop-down menu. Schedule allows you to control the availability of the guest area. You can select one of the predefined schedules or create your own by clicking the "New schedule" button.
4. After you enable the guest zone, you can enter the name that you want to use for this network.
5. To ensure maximum security, make sure that “Enable routing between zones” is not set. Use the drop-down list to select the desired security mode. Experts recommend choosing WPA before setting up a D-Link 320 router. If WPA is selected, the section will become available.
6. Next, you need to specify the WPA mode, the encryption interval, and the interval for updating the group key. WPA mode: WPA2 is the most secure, but not all devices are compatible with this encryption method, so guests may encounter problems related to the guest network.
7. If so, then it is recommended that you enable Auto (WPA or WPA2). If Auto is used for WPA Mode, then TKIP Cipher is used, which is compatible with legacy systems and some gaming systems. If you select only WPA2 mode, Cipher will automatically use AES (CCMP) by default.
8. : .
9. WPA , .
10. , , , - 8 . , .
11. « ».
12. , . SSID- .

Setting up a D-Link Dir router is not difficult, but this makes it possible to use Internet applications with high bandwidth home network, as well as viewing streaming programs in real time more high-quality and effective. In addition, the built-in advanced DIR Wireless Router firewall minimizes the threat of hackers entering the home network.