Far from always in order to refresh the interior, it is necessary to start a large-scale repair: it is enough to re-paste the wallpaper, update some pieces of furniture and home textiles. As a rule, we approach the choice of flooring more thoroughly, preferring options that are universal in color and stylistic performance. And linoleum is one of the most popular flooring to date. This is a low cost alternative to laminate flooring, durable and practical.
Of course, while starting a repair, it is better to close the linoleum with a special film or cover it with newspapers. But what if the pollution was not avoided? As part of this material, we will talk about how to wash linoleum after repair, without resorting to the help of expensive tools and preparations.
General rules for the care of linoleum
In order not to puzzle over the question of how to wash linoleum and tiles after repair, you need to prepare and then adhere to certain recommendations:
- Close the floor - an ordinary plastic film, old wallpaper, newspapers, cardboard boxes are perfect for these purposes. And in order to fix the materials used for shelter, it is better to use construction tape.
- Avoid sharp objects, such as a construction knife or spatula, to clean paint stains and remove adhering pieces of wallpaper from the surface of linoleum, since it is quite easy to damage the floor surface.
- Be extremely careful and careful in using aggressive agents - before using solvents, chemical cleaning agents, pre-test them in a small area of linoleum.
- Refuse alkaline solutions and soda - in the case of linoleum, it is strictly forbidden to use these funds. The fact is that it is simply impossible to wash the alkali from its surface: it penetrates so deep into the structure of the material, destroying its integrity and having a very negative effect on its appearance.
- Be sure to use hand protection - you should only wash the floor after repair with rubber gloves, which can be purchased at any hardware store.
Removing whitewash from the surface of linoleum
The question "how to wash linoleum after repair from whitewashing" is one of the most common. Not so long ago, for the decoration of the ceiling began to use plasterboard structures and stretch fabrics - before that the ceilings were covered with whitewash and water-based paint. So, it’s quite difficult to launder these materials, in the process of work dirt spreads throughout the apartment, and getting rid of stains is very problematic. But folk remedies will help get rid of the hated whitewash. Of course, you should be patient: traces of whitewashing can not be eliminated the first time.
Soap brine
A small amount of laundry soap and salt diluted in warm water is the answer to the question of how to wash linoleum after repair without streaks. Fundamental point: the water should not be too hot, otherwise such a surface treatment of linoleum may lead to a loss of brightness of the original color.
Potassium permanganate
Just a couple of drops of potassium permanganate, dissolved in warm tap water, will help eliminate streaks from whitewashing. Wipe linoleum with such a solution, returning it to its original appearance.
Kerosene
Many people know that kerosene is effective in combating oil stains on clothing. But did you know that it helps to remove stains after whitewashing from the surface of linoleum, without violating its integrity. So, for mopping it is necessary to dissolve a small amount of kerosene in water, and then treat the surface with a solution. Kerosene has a sharp unpleasant odor, so do not be lazy after using it: wipe the floor with water several more times.
Already clean linoleum should be washed once with warm water, dried well, then rubbed with a piece of soft woolen cloth, which will give the surface a glossy shine
Get rid of traces of paint
If you used paint, even on a water basis, to finish the ceiling and walls, it is unlikely that you can eliminate the traces of it with a simple floor cleaner, even with a modern chemical agent. So how to wash linoleum after repair in this case? How to remove paint stains? The first and main rule is to start cleaning, that is, remove stains, immediately after contamination, do not delay, since dried stains are much more difficult to eliminate.
Sunflower oil and solvent
Experienced housewives know that sunflower oil can be used not only in the kitchen for cooking culinary masterpieces, but also in the fight against stains on linoleum. Sunflower oil surprisingly affects the structure of the paint, softening it. It is not for nothing that it is used by many as a folk solvent.
Treat stains with a cotton pad dampened with vegetable oil. After standing for several minutes, you can begin to remove them, armed with an economic brush with hard bristles.
Old proven method: do not know how to wash linoleum after repairs, in particular painting walls or ceilings, use a solvent or any other alcohol-containing product. They have repeatedly proved their effectiveness.
Eliminate acetone primer marks
The primer is an integral stage of finishing work, it covers the walls and ceiling both before painting and before wallpapering. If you have ever had the opportunity to work with soil, you probably imagine its consistency: it resembles ordinary milk, but is sticky and sticky, due to which the basic properties are ensured.
How to wash linoleum after repair from the primer? Everything is much simpler than it seems at first glance. To remove stains from the primer, it is better to use a rag - it allows you to get the maximum result.
To prepare the solution, you need a third of acetone and two-thirds of warm water. He can fight even with dried marks and stains from the primer. Well, if the rags soaked in the solution cannot be removed the first time, use a sponge with a hard surface.
Nail polish remover
Did not find acetone at home? Not a problem. It can be replaced with a nail polish remover, which is found in every woman’s makeup bag. Of course, this method is reasonable to use with a small area of pollution, otherwise you will have to spend a considerable amount of time. Moisten a cotton pad in the product and treat it with a surface.
Recipes of our grandmothers
In the arsenal of modern housewives there are enough tools to eliminate pollution from the surface of linoleum in a matter of moments and return it to its original appearance. But there are time-tested means that our grandmothers have resorted to. But they demonstrate high efficiency. They also want to focus on:
- Milk and water. Such a solution is used to restore the sheen of the surface of linoleum. It is enough to process the floor with it, dry it well and rub it with a piece of woolen cloth. You will not recognize your linoleum, even if you laid it an apartment a few years ago.
- School Eraser. An ordinary school eraser will help get rid of the bands formed on the surface of linoleum from shoes.
- Matches. The sulfur from which the match head is made is an excellent tool for removing traces of a ballpoint pen from the surface of linoleum. It is enough to moisten the head in water and rub it with the place of contamination - the paste will become wet, it will be possible to remove it with a piece of soft cloth without lint.
- Juice of young cabbage. And this is a surefire means in the fight against ingrained pollution on the surface of linoleum.
To summarize
Despite the abundance of chemicals in hardware stores, many still wonder: how to wash the dark linoleum after repair, how to avoid the appearance of stains on its surface? We proposed the most effective and at the same time fairly simple and affordable means. Do not believe? Then personally check at least one of them - for sure you will be satisfied with the result.