Decorating a house is not a quick process, and you should pay attention to a lot. Today, there is a huge variety of building materials on sale. And the main thing that attracts many is imitation in any direction. At the same time, the manufacturer creates so accurate copies of the original materials that it is possible to understand the difference only upon close examination.
It does not matter what kind of cladding is involved - internal or external. Finishing the house inside with imitation of timber is often performed work, because there are various color solutions for both the original component and its copies. Such cladding is able to create the best external conditions of comfort and coziness. But before starting all the work, you should get more information about this material.
Where is it used?
Often such a finish is chosen specifically for country houses. There are reasons for this. Most importantly, the wood is completely environmentally friendly and suitable for interior decoration. When the best conditions for relaxing from the city are created in a country house, this allows you to recharge your batteries. Especially many are attracted by the imitation of light tones. Also, the material has excellent sound and heat insulation. Such decoration is carried out quickly, while everything is unique and of high quality.
What is the finish?
Conventionally, it has several directions, which depend on the method and nature of internal work. But a lot depends on the design direction, which was chosen at the planning stage. Finishing a house inside an imitation of a bar can have two main types:
- Monolith. This is when the decoration is performed around the entire perimeter of the room - floor, ceiling and walls. The fastening is as tight as possible. Visually, it resembles a monolithic design.
- Mixed. This is when the main area is under the beam imitation, but there are separate parts made by other material. At the same time, the general style is maintained. Such additions include wallpaper, tiles and even plaster.
Other components to be prepared
No matter which method is selected for the room, you need to purchase all the components without which it will not be possible to create a process. This includes:
- cornice;
- corners;
- molding, etc.
Thanks to them, the room becomes valuable. Therefore, when calculating your repair costs, you will have to take this into account. In general, finishing a house inside with imitation of a beam is not such an expensive material, when compared with a solid wood. But it looks attractive and does not differ from the chosen natural direction.
How to prepare?
So that the work does not hinder, you need to know what parameters the entire product must meet:
- Quality is not lower than indicator “B”. Store managers know this, so it’s worth clarifying this question.
- The most suitable width is not more than fifteen centimeters and not less than ten.
If the board is narrow, then it will be comparable to a lining, and it will be completely unlike a bar. Too wide a board will visually reduce the space, which is not suitable for small rooms. Thickness is also not always a necessary indicator. It is enough 20 millimeters. Still need to pay attention to the quality of the material itself. But if the finishing work is carried out in an unheated room, there will not be much difference.
What else do you need to know?
When repairs are carried out in the house, some smells can provoke an allergy in humans. The final result and the period of operation will depend on the quality of the finish itself, if you do not save on quality, the decoration of the house inside an imitation of timber will serve for many years. If work does not begin immediately after acquiring all the components, it is worth storing the material in a horizontal position in a dry and ventilated area.
When the preparatory work is in progress, the decoration of the house inside with an imitation of a beam (the photo of the work is in our article) begins with the unpacking and transfer of all the components to the place of their installation. Material is left for several days. Thus, adaptation takes place. Sometimes you need to additionally process the material with something. This is done before he is in his place. And after that you can already varnish or leave as is.
How much material is needed for work?
Everyone knows that building materials are not cheap, so no one wants to spend money on unnecessary ones. To prevent this, you need to make elementary calculations before buying. Finishing with imitation of timber indoors implies a preliminary calculation of the total quantity. For this, the width is taken as the basis. It is important to calculate the area on which the work will be carried out: the dimensions of each wall are taken, but windows and openings, the ceiling and the floor are subtracted. After the result you need to scatter on the area of one board. Thus, it turns out you need the quantity for any area.
This method is suitable when the monolithic finishing method is chosen. When preference is given to combined repair, then it will be necessary to carry out computational work on each area, after which the obtained indicators are summarized. If there is no great experience in construction work, you need to acquire each material with a small margin. All fittings are also calculated - the design of corners, cornices, moldings, etc.
Create the foundation
The walls in the room can be any, it is important to use the right material. If this is a wooden crate, then the bars are pre-dried and processed with special compounds. The metal profile is suitable for a brick or concrete structure. To create the foundation, you need to attach all the guides, separating them with a distance of 600 millimeters. Although everyone decides for himself how much it will be.
There must be at least two bars in the corner. In this work, one cannot do without a level, because otherwise the whole structure will turn out to be uneven. We must not forget that the room implies finding shelves and other elements. For their fastening, it is worth placing the bars when the crate is mounted. At this time, wiring is done, but for reliability, it is deepened into a special corrugated tube. When the crate is finished, you can start the basic work - wall cladding.
All materials for the foundation should be purchased in advance. They also miscalculated so that there was no excess and that was enough. The procedure here is the same as with the main material. But you need to have a small margin for marriage. Ten percent of the total amount is enough to not overpay.
Cladding fixation
There is a photo of finishing the imitation of the beam inside the house in the article - they help to visually understand the whole process. In addition, the visualization of any project makes it easier to perceive the color and compare it with your apartment. The work is done step by step and at the same time it is worth following the recommendations at each stage.
Conventionally, wall decoration with imitation of timber inside the house (there is a photo of the work in the article) has the main stages. Installed:
- Waterproofing material.
- Lathing and thermal insulation.
- Windproof film.
- And only after that - imitation of timber.
Board Mounting Methods
But to fix the boards, you can use any of the methods:
- Installation and fixing in a groove. This is a convenient method. Hats fasteners are in a hidden position. A self-tapping screw is launched into the spike, but at an angle. If done competently, without violating the degree of 45, then nothing is visible.
- Fastening from the outside. Nails are driven over the board. It is clear that the hats will be in sight. In this case, you need to find decorative fasteners or purchase plugs immediately. It’s worth calculating everything, sometimes it turns out that there are not enough finishing elements and the sale is over or the color does not fit.
- Kleimers. This is the most common option among masters for mounting panels. The material for decorating a wooden house is clearly visible inside the imitation of a beam in the photo. It immediately becomes clear where it will turn out. This fastener is considered the connecting link between the panels. They quickly connect each element, even a person with no experience will cope with this work.
Before you start decorating any room, you should decide how to fix the basic elements. Some even use adhesives. They are no less reliable, and working with them is easier and faster. Therefore, all this is decided at the planning level.
Which panels to choose?
Depending on the room itself, there is a separation of the panels, and each should be selected depending on the characteristics. You have to pay attention to a lot:
- Hardwood paneling. Well suited for any room. Materials are distinguished by the fact that they are practically odorless and do not change color during their service life. Photos of the finishing of a frame house inside an imitation of a bar are given below.
- Oak. It is a resistant material to moisture and physical impact, its service life is the longest. It looks good in many rooms - a nursery, a hall, a living room.
- Larch Reviews say that it is immune to moisture, so it is often found in the bathroom or in the kitchen. It has an interesting drawing and helps to implement any design decisions.
- Softwoods - spruce, pine. There is enough resin in the composition. Reviews say that it is good for rooms with a high temperature. Moreover, exposure to moisture or moisture is not fatal. But there will be a smell. It is pleasant, but not everyone tolerates it.
In any case, finishing a wooden house inside with imitation of a beam is beautiful and at the same time environmentally friendly. In addition, each material has its own unique pattern, which sets the color and style. In order not to forget anything, you need to collect the necessary material and tools. List:
- The panels themselves with the calculation.
- Skirting board.
- All to the crate.
- Fasteners and fittings.
- Building level.
- Screwdriver.
- Bulgarian.
- Drill.
- Personal protective equipment.
This is just the basic, but sometimes something is required individually. If there are no tools in the apartment, then it is better to entrust the whole process to professional masters. But, observing the technique of work, each will succeed in achieving the desired result.
Panel Mounting Process
Finishing a frame house inside with imitation of timber or any other material does not make much difference. It is only necessary to choose the appropriate fasteners. After acquiring the material, it is worth letting it rest. He gets out of the package, laid out only in a horizontal position. You need to wait at least 24 hours - so he gets used to the existing microclimate. While this time is running, walls are being prepared for finishing work.
The process itself is carried out in several stages:
- To retreat from the wall in front of the first board you need half a centimeter. Imitation is fixed under the beam, and then the first row is laid.
- Boards should go up with spikes. It’s easier to match the spike groove.
- If work is carried out in a heated room, then a small gap is made between the boards, for expansion. It should not exceed two millimeters.
- Having reached the windows, corners and doorways, it is worth applying a level so as not to disturb the vertical sections.
- Each wall plane is filled from bottom to top.
- Once the main work is completed, you need to finish everything with skirting boards.
Fixing the finishing material should only be perpendicular to the created crate. Kleimers are most suitable. They are reliable, and they are not visible at the same time. Often after work, the surface is coated with special compounds, but they are chosen depending on the tree.
Conclusion
So, we found out how the decoration of the house inside is performed by imitation of timber. As you can see, this work can be done with your own hands. In any case, the imitation of the beam will be relevant. This is a good design direction and at the same time environmentally friendly material. It turns out everything is stylish and beautiful.