The Tenda N301 currently belongs to the segment of the most affordable network gateways. Configuring this router, checking its operability, as well as the reviews of the owners of this router model will be described in detail in this material.
Positioning solutions. Equipment. Specifications
As noted earlier, the considered solution belongs to the group of the most affordable routers. The main scope of its use is small home computer networks. In all other cases, it is inappropriate to use.
In addition to the router itself, the manufacturer included a 1 meter long crimped twisted pair cable (it is used in the process of configuring the device using a PC), a power supply, and also a disk with software and an electronic version of the documentation. It also has a warranty card with a commitment period of 1 year. Also in the delivery list there is also a user manual for the Tenda N301 router, its configuration in which is described in detail and in stages.
The technical specifications for this device are as follows:
Wireless transmitter standard Wi-Fi, which can transmit information at a speed of 300 Mbps.
Three Fast Ethernet ports that can operate in 10/100 Mbit / s mode. They are labeled LAN1 - LAN3.
One WAN port for implementing global network switching. The transfer rate will be equal to 100 Mbps.
Setting procedure
Setting up the Tenda N301 router consists of 2 main steps. The first of them is a full connection of the device, and the second is to establish the necessary parameters of the software shell.
Switching the router includes the following actions:
Choosing a router installation location. Moreover, the closer it is to the center of the apartment, the better will be the quality of Wi-Fi coverage inside it. Also, the wire from the provider and the power cord should reach this place.
The next step is to connect the power supply to the outlet of the power supply system. And its power cord is connected to the power socket of the device in question. Also, the twisted pair cable from the provider is connected to the RJ-45 connector labeled WAN.
If necessary, a wired connection to the components of a computer network is implemented. Ports are used for this, starting with LAN1 and ending with LAN3.
Before turning on the router, you must rewrite the default Wi-Fi network name and password to connect to it. This information is located on the bottom cover of the network gateway enclosure.
We turn on the router and proceed to its software configuration, which consists of the following steps:
We connect any mobile device to a Wi-Fi network. To do this, we turn on automatic search for available networks on it. At the end of the list appears, and in it we select the one whose name is indicated on the bottom cover of the network gateway. The next step is to enter a password.
After establishing a connection, launch the browser on a smartphone or tablet. In his address bar, we type "192.168.0.1". Then, to gain access to the configuration menu, you must specify the login and password of the administrator of the network gateway. By default they are the same - admin.
At the next stage, you need to enter the "Basic Settings" and set the device parameters. First, select the type of connection, which is specified in the contract for the provision of services by the provider. For example, when setting up the Tenda N301, Rostelecom requires setting these parameters:
Type of connection - PPPoE.
The following two fields indicate the username and password from the contract. If they are not in this document, then you can, if necessary, clarify this information in the customer support center.
Also on this tab, you need to set a new password for the Wi-Fi format wireless network.
We save the entered parameters. Reboot the router.
Testing, reviews and cost
This completes the full setup of the Tenda N301. Now you need to check the health of the system. To do this, turn on the Wi-Fi transmitter on the tablet or mobile phone. Again, we start the search for available networks. We choose the name of ours, but now we enter the updated password. Then we launch the browser and enter the address of any page from the global web. If the Tenda N301 is configured correctly, the corresponding information resource will open.
Owners of this device are characterized as reliable, affordable and functional. Moreover, during the operation of the minuses he was not identified. Its price is 600-800 rubles.
Conclusion
Setting up the Tenda N301 is a fairly simple operation that does not require any special knowledge. This router is designed specifically for home use. In all other cases, it is not recommended to create a computer network on its basis.