Many people who are faced with repairs are interested in the issue of fasteners for lighthouses for plaster. In order to obtain an even wall surface for further processing at the end of the rough finish, it is better to align the walls with beacons. This technique is characterized by versatility, as it is used to prepare and level the base for plastering wall surfaces. The information provided below will help you understand what this structure is and how to mount it.
Lighthouse species diversity
When applying a layer of plaster of this kind of design look like bounding strips used to orient the master. Despite the fact that you have to tinker with fasteners for lighthouses for stucco, such a system will help a specialist more easily and efficiently perform stucco with his own hands.
What are lighthouses made of?
For the manufacture of lighthouses, special materials are used:
- metal profiles - lighthouse rails of 3, 6 or 10 mm in size;
- metal tubes;
- cement or mortar.
Features of fastening lighthouses
Types of fixtures involve the use of a variety of fasteners for lighthouses for plaster. Experts recommend that before proceeding with the organization of this kind of reference, familiarize yourself with the instructions for preparing fasteners in order to get rid of possible problems in the future.
Fasteners for lighthouses for plastering are made in two ways:
- using dowels;
- using the solution.
What is required for fastening lighthouses?
In order to competently and efficiently perform the work, it is worth purchasing some equipment. It is best to prepare in advance by including the following devices in the kit:
- dowels and screws in the required quantity;
- a rope;
- building level;
- hammer drill;
- metal-based lighthouses
Now we have to figure out how plaster beacons made of a metal profile are attached.
Progress
Instructions for the implementation of work related to the organization of fasteners for lighthouses are as follows:
- Before proceeding with the installation of lighthouses for plaster, vertical markings are applied to the walls. The lines are recommended to be drawn in increments of 90 cm, with the first line indented 20 cm from the edge of the wall. This process must be strictly controlled, armed with a plumb line or level, because the further outcome and the quality of the finish depend on the accuracy of the marking.
- Along the extreme lines along the entire length of the marking, holes of the required diameter are drilled in increments of 30 cm, which is determined depending on the thickness of the dowel. If it is not possible to use dowels, they can be replaced with choppers, which will be no less effective.
- Screw the screws into the prepared grooves, but so that the free edge can be easily grasped. Thus, the process of adjusting the correct location of the surface will be easier. At the same time, the self-tapping hats are aligned, putting on them lighthouse fasteners. After that, fasteners of beacons for plaster are made.
- Between the vertical profiles already fixed, the rope is pulled along the edges of the wall and the places of the protrusions on the wall are determined. The thickness of the plaster layer is adjusted by screwing in / out the screws.
- The stretched cord in this case serves as a guide, and a piece of the corner taken as a template is used to similarly fix the beacons along the remaining marking lines.
This simple technique for adjusting the thickness of the plaster layer is used by the masters during the decoration of the walls. Now you know how the arrangement of lighthouse fasteners looks and are guided by such concepts.