If you are concerned about how to fix the headphones, then you should know that with certain skills and in good hands everything will work out. The most common breakdown in the headphones is a broken or frayed cable near the plug. Next, several techniques will be described to effectively solve the problem. Such a breakdown is due to the fact that this section is subject to continuous loads, which is why it wears out the most. However, the plug is not the most expensive component in the headphones, so do not rush to throw out the headphones because of such a breakdown.
How to fix headphones: options
It’s a pity, but now there is no sale of a plug with a wire that can replace the old one, but there is a very simple way out of this situation. The plug can be used from the cheapest headphones, whose cost does not exceed three dollars. Usually they are difficult to use for their intended purpose, as the quality of their sound is simply terrible. And for parts they are great. It is worth mentioning also that the plug with a wire for such headphones is not of high quality, so it is not yet known how long they will last for you.
If you don’t want to repair too much every month, then you should contact the radio parts store. In such places plugs are usually sold. They can also help you with the question of how to fix the headphones. To connect your wire to a new plug, you may need a soldering iron, as well as the ability to use it. Plugs can be straight, with an angled wire feed, as well as original non-separable. In addition, they may differ in price, so you should not save. It is important to note that internal audio connectors are also subject to replacement, however, such a process is noticeably more complex and expensive.
How to fix headphones whose wire is broken?
This type of breakdown is the most common. First of all, during the repair, you must expose the wire. This can be easily done with a regular knife. It is necessary to remove the insulation layer in the place where the wire was torn. Now you must connect the two parts of the cable. This can be done using a conventional heat shrink tube. With its help, you can pull off the parts of the wire, after which a contact appeared between them. Now that the wire is connected, you must protect it again, because now it does not have a protective layer. This can be done using electrical tape, which needs to be wound around the junction. This method is the most simple and affordable. After you have done everything described above, your headphones should work again.
How to fix headphones with a broken plug?
With such a breakdown, we are faced with a small problem. Here you will need to replace the plug, that is, buy a new one. Connection can be made in the same way as wires. Only at the junction is it desirable to fuse the wire with the plug, which will allow it not to fall off in the future. When the wire and plug are heated, they must be rewound with electrical tape for greater reliability.
It happens that something else breaks. For example, if you are interested in how to fix headphones with a microphone, then it is important to say that there is nothing complicated. In this case, the whole process is similar to the above, it is only necessary to connect more wiring. If you encounter a breakdown of a different kind, that is, something has fallen off on your headphones, you need to glue it with super glue, press it well, after which they can be used further.
You can draw logical conclusions from everything described that there are no difficulties in fixing headphones. However, if you are not confident in your abilities, you can always turn to the masters who guarantee the quality of the repair for help.