There are many factors to evaluate the benefits of thermal insulation. The high functionality of this material is expressed in the ability to store thermal energy. Among the significant factors, it is possible to single out the ease of installing the heat barrier. In this perspective, the thermal insulation in the roll version has significant advantages. This type of heat barriers is equally successfully used for the purpose of installing heat barriers at various facilities. Users choose this type of thermal insulation for the reason that it is convenient to transport, it is compact if necessary for storage, and convenient for installation. Roll insulation is soft, which is why the fit to the surface to be protected is very tight. The material can be used immediately after unpacking at the installation site. A heat-saving screen can be equipped with the efforts of only one person. Among the additional advantages of such thermal insulation, the absence of rotting can also be distinguished, which allows the material to be used in areas of high moisture content, this applies to baths, pools and bathrooms. The antibacterial base, which is not blown, improves the microclimate of the living room.
Features of polyethylene foam
If you decide to choose a roll insulation, then you can prefer polyethylene foam, which is used to equip the internal heat-saving barrier. It is strengthened under the skin of the panels, as well as under the wallpaper. Such material can be installed under the gypsum fiber and under the slats. The canvas, which is rolled up, is covered on one side with a foil or paper layer. Such an addition is designed to increase mechanical strength and improves the quality of thermal resistance. If the foil is turned inside the living room, then it will be able to reflect 90% of the heat rays. If you want to achieve a particularly effective result, then you need to have such a thermal insulation between the heating radiators and the wall. If it is not possible to carry out facade insulation, then a thin layer of polyethylene should be coated on the inside of the wall, which will be the best solution.
Characteristics of mineral wool
Considering the assortment of thermal insulation materials in the store, you will surely pay attention to the roll insulation, which is mineral wool. Today, this material is widely known and popular. In its structure, it is brittle, but in rolled up form it has better characteristics, and during operation it is constantly being upgraded. That is why modern mineral wool is flexible and allows you to bend around irregularities, it can be unwrapped and folded many times without the possibility of shedding and brittleness. Choosing such a roll insulation, you get a material whose thickness can vary from 0.5 to 0.75 decimeters. It is worth noting that the plates have a thickness within 1 decimeter, which is more. Therefore, using a roll of insulation in the form of mineral wool, you can change the thickness of the heat barrier using a different number of layers. The width of such a canvas can be equal to 1, 2 or 0.6 meters. As for the length, it is 10 meters or less.
Characteristics of basalt wool
If the insulation for the roll wallpaper, which was discussed above, does not suit you, then you can choose basalt, or fiberglass wool, which has a wide potential for use. It can be installed on walls or floors, as well as on ceiling spans. It is not recommended to use this material for an inclined roof, this is due to the fact that over time there is a sliding of the array, and the insulation density is violated. If you want to use this insulation for floor insulation , you need to lay at least two layers. This will allow you to get 1 decimeter of thickness. If there is a need to insulate the walls, then half the amount should be used, while laying the material in one layer will be enough. If you want to achieve the arrangement of an effective heat-saving screen, then you should use a similar thermal insulation with steam and waterproofing.
For reference
Roll insulation with foil has found its application in the need for pipe insulation. It was for this purpose that this type of insulation was originally used. The technology of laying such thermal insulation on different surfaces is not the same. However, glue is almost always used for fixing, the joints between the strips must be lubricated, for the initial fastening it is best to use anchors with washers of impressive diameter. This will serve as a good protection against material sticking out during poor-quality gluing.
Manufacturers Overview
If you choose a rolled foil insulation, then you should pay attention to Knauf products. The manufacturer mentioned is located in Germany, and its product does not contain formaldehyde, which is why it is popular. This thermal insulation is not able to have a harmful effect on the human body and does not cause allergic reactions even during installation. That is why you should not be afraid of contact with the material. Nevertheless, installation work is recommended when using personal protective equipment. The material of this manufacturer is distinguished by excellent environmental friendliness, however, you should be prepared for the fact that rodents and insects can start in it during operation. But positive qualities make up for flaws. One of them is expressed in reliable protection of households from noise and cold. Such rolled wall heaters are used for thermal insulation of country houses and cottages, as well as residential buildings. If necessary, you can insulate the pipes with thermal insulation of this manufacturer.
Thermal insulation of the Isover brand
If the Knauf rolled insulation is not entirely suitable for you, then you may prefer the goods of the French manufacturer Isover. A distinctive feature of these materials is high density, which is higher compared to peers and amounts to 17 kilograms per cubic meter. Another distinguishing feature of the brand is a wide range of insulation dimensions, so the thickness can vary from 20 to 150 millimeters. The brand has insulation that is covered with foil. You can use it for warming pitched roofs, walls, heated floors, as well as saunas, baths and ceilings.
Additional information about Isover thermal insulation
This insulation belongs to the first class of flammability, which indicates that it does not flare up when exposed to fire and exhibits the ability to attenuate in case of fire. You can buy insulation at a price that varies from 800 to 1300 rubles.
Features of thermal insulation of the brand "Ursa"
If you want to use basalt coil insulation for thermal insulation, you can purchase URSA brand products, which have a long service life. The material does not crumble, does not break, and also exhibits excellent quality during installation. You can purchase rolls, the width of which varies from 50 to 100 millimeters. You can use it for insulation of walls, pitched roofs, as well as floors. You will have to pay 1000 rubles for a mineral roll insulation.
Recommendations for choosing a heater
Before you buy material for thermal insulation of any surfaces, you should carefully examine the surface of the roll, which should not be damaged. This also applies to packaging integrity. If moisture gets inside, then the characteristics of the insulation may deteriorate and not meet the requirements of heat and sound insulation. Then an expensive purchase will not allow you to achieve the desired result during the work.