Construction is that area of human activity that will always exist. It is not surprising that materials and technical devices intended for the construction of buildings are constantly being improved. An important element of any structure is the isolation of structures from the negative impact of the external environment. One of the highest quality materials for this purpose is considered to be Izospan AM.
What is the material?
So, this product is a special membrane that is used to protect building structures and heat insulators that are susceptible to wind, moisture, freezing temperatures, condensation, and even sunlight. It can be used for processing roofs, attics, walls and other parts of the building. And it doesn’t matter, a one-story building or a multi-story building.
The material "Izospan AM" has many advantages that make it popular. In addition, it is quite simple to install. It is possible to lay the membrane in any weather, as it has water-resistant qualities.
Features of the manufacture of the product and its technical characteristics
Izospan AM is a very high-quality material. Fortunately, there is no deficit in it today. As for the manufacture of the membrane, a high-quality polymer material is used for this .
The product consists of a special film, which is highly resistant to environmental influences. A substrate is connected to it, designed to harden and protect the upper layer from mechanical damage and tearing.
In general, Izospan AM is a popular insulating material that provides long-term service of buildings. Now you should understand what manufacturers offer today.
If you decide to use the Isospan AM material, specifications are the first thing you should pay attention to. It is fully made of polypropylene. You can use the material in the temperature range from -60 to +80 degrees. In addition, under direct sunlight, the membrane can continuously be at least three months. The material stretches well, while high strength does not allow it to tear.
Product Advantages
Now we will understand why this isolator is so popular. The material has the following advantages:
- Profitability . The product has a relatively low cost. In addition, it allows you to reliably protect the structure, so that it does not require additional repairs for a long time. This reduces the cost of maintaining the premises.
- Availability The membrane is not a deficit in the construction market, it can be purchased at almost any building materials store.
- Ecological cleanliness. The material is made from safe raw materials that do not emit toxic substances. When laying it, you can not be afraid of any allergic reactions.
- Vapor tightness, moisture resistance. This property also provides additional protection to the structure (for example, if it is exposed to rain).
- Resistance to sunshine. Thanks to this, your insulation (or wooden supports) will not dry out. However, do not leave the membrane under direct UV radiation for a long time.
- Light weight, which allows the use of the presented material in any construction work.
- Durability. High-quality raw materials are absolutely resistant to decay, damage by insects and rodents.
- Mechanical strength, which is provided by a special substrate.
The Izospan AM material, reviews of which give reason to talk about the appropriateness of its use, is a really reliable barrier to the negative impact of the environment.
Product Areas
How can I use this membrane in construction? This material has been widely used. "Isospan AM" is used to protect:
- insulated roof;
- bearing elements;
- walls with external insulation;
- floors of multi-storey buildings;
- single-story residential, industrial and utility rooms.
Installation sequence
How is styling done if you plan to protect the roof? The installation sequence in this case is as follows:
- Rafter system.
- Steam insulation.
- Insulation.
- Counterrail.
- Izospan AM.
- Roof.
Now you should consider how exactly this product is mounted.
What tools are needed to work
Before laying Izospan AM, it is necessary to assemble the tools with which you will carry out the installation. For example, you may need the following devices:
- construction stapler and staples (for fixing the membrane);
- scissors or other cutting tools;
- hammer and nails for fastening the counter rails;
- self-tapping screws;
- yardstick.
These tools are quite enough for the installation process.
Features of material laying
Useful for reference is the instruction attached to the material. Izospan AM has certain installation features. For example, it is always laid only on top of the main insulation material. This provides effective moisture removal. The membrane is laid with the red side inward. The fact is that the white layer is more durable and protects the material from negative external influences. It is mounted with horizontal panels. Moreover, each new piece should go to the previous one. The size of the overlap on all sides is at least 15 cm.
In order for the presented membrane to hold well, you can attach it with a construction stapler. Additionally, you can protect the rafters. At the joints of the film, you need to fix the antiseptic counterrails. They will fix the membrane. In addition, with the help of these rails you can organize a ventilation gap between the membrane and the roof (4-5 cm). After fixing it, you can lay the crate on which the roofing material is fixed.
It is desirable that the membrane be stretched. If you will mount the material on the walls, then the overlap should be no more than 10 cm. In principle, it is easy to mount the presented product. You can do it yourself.
Useful Tips
The use of the material is quite simple, but the process should be approached responsibly. There are some tips for laying the membrane:
- Try to ensure a natural outflow of moisture from the insulation. To do this, do not cover the bottom edge of the web.
- Since the material is sold in large sizes, it will have to be cut. You can do this at a construction site. Moreover, the material should be spread directly on the insulation.
- Try to use this product carefully, despite its durability.
- Do not use the membrane as a permanent or even temporary roofing. In direct sunlight, it will not last long. And the real roof is more reliable.
Keep in mind that you will perform the work at height, so all actions must be performed as carefully as possible. It is necessary to take care of your own safety (put on comfortable shoes that will not slip). It is undesirable to carry out work in windy or rainy weather, as this can lead to a fall from a height. For greater safety, tie yourself to the rafters. That's all the recommendations for laying this material. Good luck with the installation!