Dot matrix printer Epson LX-350. Specifications, setup and reviews

The Epson LX-350 Dot Matrix Printer is a highly specialized printing device. Such peripheral solutions are quite expensive. But the scope of their application comes down to banking institutions, railway stations or various supermarkets. They can also be found in cases where the company’s accounting uses outdated software. It is about this affordable printing device that will be discussed later.

Delivery list

The Epson LX-350 delivery list consists of the following components:

1. Matrix printer.
2. USB interface cable
3. User's manual.
4. Power cable.
5. Warranty card.

A disk with drivers, diagnostic application software and electronic documentation is not included in the delivery list because all this information can be obtained on the official website of the Japanese company. The printer management software is also part of the Windows drivers. Therefore, they are automatically installed when the device is connected.

Key technical specifications

As previously stated, dot matrix printing is the basis of the Epson LX-350. Its characteristics indicate that using a set of needles and a toner film, a picture is created on the surface of the paper. In this case, only 9 needles are included in the print head. The resolution of the output documents is 240X144. As a carrier in this case, you can use pages with A4 dimensions or a roll with a similar width. At the driver level, you can specify arbitrary sheet sizes if necessary.

Ways of switching. Setting procedure

The developers have equipped this device with an extended communication list. It includes the following ports:

The main and most universal way to connect to a personal computer is a serial USB. A possible alternative is the parallel LPT port. This solution is also equipped with another serial COM connector, which can be found on very old personal computers with a service life of more than 10 years. Also, the list of connection methods complements the power connector, using which the power supply of such a local printing system is realized.

A very and very simple setup procedure for the Epson LX-350. The instruction includes the following manipulations:

1. Removing the print subsystem from the box.
2. Its assembly and dismantling of transport locks.
3. Installation near a PC.
4. Performing full switching.
5. After this, the installation of drivers, as previously noted, will occur automatically.
6. Then you just need to print a sample test page and the device is ready for operation.

Reviews, price of the matrix printer in question

Now Epson LX-350 can be purchased for 14000-14500 rubles. This is a fairly high cost. Therefore, they buy such matrix printers in cases where you can not do without them.

The advantages of this device are as follows:

1. Low maintenance costs for such a printing subsystem.
2. Simple setup.
3. An expanded set of communication ports.
4. Adequate setup.

The disadvantages of this solution are as follows:

1. Very low speed.
2. Increased noise during operation.
3. Very, very poor print quality.

Finally

It is important to understand that the Epson LX-350 is a purely specialized device. He has excellent specifications for his niche. But if it is possible to use a more modern printer based on the inkjet or laser method, then it is better to choose it.