How to transfer a pattern from paper to paper and to other surfaces

If you do not know how to draw, but would like to learn, it is worth starting with a simple one - copying drawings. For starters, this can be done with tracing paper. This method is the easiest to execute. Now let's take a closer look at how to transfer a pattern from paper to paper.

Instruction manual

To transfer a picture, follow the procedure below:

1. We select the image and put the tracing paper on it, with a tight pressure we circle all the lines, using a black acrylic pen.
2. Now turn the tracing paper over and put the face to the sheet of paper on which you want to transfer the image.
3. Press tightly and pass through it with a hot iron.
4. Now remove the tracing paper and additionally draw insufficiently clear lines.
5. Image is ready.

This method is used for simple pictures that do not contain a large number of complex parts. Now you know how to transfer a pattern from paper to paper in a simple way. After trying it, you can proceed to others.

More complicated way

To transfer complex patterns, you can use the grid to copy. With its help, it is also possible to reduce or increase the scale of the image itself.

Are needed:

• original drawing;
• transparencies;
• capillary handle ;
• paper;
• duct tape;
• ruler;
• pencil.

Instruction manual

To master this method, follow these steps:

1. We apply a transparent film to the original image, on which squares of the same size are depicted.
2. We apply the same cell to a clean sheet of paper if the picture is reproduced in the original. How to transfer a pattern from paper to paper when the image size needs to be changed? With an increase in the size of the squares do more when we reduce, respectively, less.
3. Now all you have to do is transfer the image in the cells.
4. When the picture with the pencil is completely transferred, you can begin to paint.

Now you know how to transfer an image from paper to paper. Consider other surfaces.

Body as a basis

Tattoo is a highlight of appearance, but not everyone decides to put a picture on the skin, realizing that this decision is made for life. For people who are afraid of such an act, but want to decorate their body with a beautiful image, temporary tattoos are an excellent solution . To learn how to transfer a pattern from paper to skin, you need to study the following information. The main stage is a clear drawing of the contours of the future image.

A picture can be applied to the body with:

• carbon paper ;
• tracing paper.

First way

For it you need to perform the following steps:

1. Choice of a picture, determination of the place of its application, skin disinfection.
2. Transfer the image to carbon paper. To do this, put the paper on the original and carefully outline all its contours.
3. Wet the carbon paper with alcohol and apply it to the body.
4. In order for the outlines to print well, circle them again through the carbon paper, trying to leave it whole.

Second way

It is based on the use of tracing paper. The following steps must be taken:

1. We draw the helium pen the drawing itself.
2. Disinfect the skin and smear with soap.
3. We put tracing paper and outlines the contours with a sharp object.
4. Now paint over the drawing.

If you still decide to apply a permanent drawing on your body, approach this very carefully. The main thing is to choose a good salon, pass an allergic reaction test and check that all tools are disinfected.

How to transfer a drawing from paper to glass

For work, we take an image with good contours and a roll of cling film. To transfer, you need to purchase a felt-tip pen - a marker for glass, it fits well and is easily washed off the surface.

Instruction:

1. Take the film. Its size should be slightly larger than the drawing itself. The film is attached to the surface, which prevents the picture from straying.
2. The image is put on film and traced thin and very neat.
3. Now the film is gently transferred face to a previously prepared surface. Preparation consists in degreasing its front side. Make sure that the film adheres completely to the glass, get rid of wrinkles and bubbles.
4. For a clearer transfer, once again we outline the image with any sharp object.
5. It is time to get rid of polyethylene. We do this very carefully so as not to smear the picture. If there are inaccuracies somewhere, now is the time to fix them.
6. Now draw the outline. This can be done with acrylic paints and a brush.
7. After everything is dry, carefully with cotton swabs dipped in liquid, we get rid of traces of the marker.
8. Inside the image is filled in any way. If the technique is stained glass, then everything is poured along the contour.
9. After drying, the product can be baked or varnished for a longer product life. It all depends on where this item will be used.

How to transfer a drawing from paper to wood

In order to see your favorite image on a wooden base, you just need to follow the steps outlined below.

To work, you will need:

• drawing printed on a laser printer;
• wooden plank;
• acrylic gel medium;
• flat tool for leveling the picture;
• paint and rag;
• soft paraffin or matt glue;
• 2 brushes.

Instruction:

1. Image selection. This should be a drawing that will look beautiful on a wooden base. To give some similarities with the vintage style, it can be processed in special programs.
2. The image is printed only on a laser printer, this is the main condition.
3. A smooth wooden base is selected.
4. Now apply a uniform layer of gel medium. It is he who will help the image transfer to the prepared surface.
5. We have the figure face to the base. At the moment of joining, bubbles arise which should be smoothed out whenever possible.
6. Today the work is finished, leave everything for the night, continue tomorrow.
7. It is time to remove the paper. To do this, wet it and wipe it with your fingers. Right now you are witnessing a miracle - when removing the paper you can see how the image remains on the tree.
8. Now you can use paint for wood. Keep track of its amount so that the image does not darken.
9. Now apply liquid paraffin. If necessary, the last two steps can be repeated after the first layer has dried.

Other basics for image transfer

Metal is a base also suitable for such "tricks." For accurate and fairly accurate work, two axial lines are drawn on it or the angles of the image are marked. Now we will consider in more detail how to transfer a drawing from paper to metal.

The most common is the use of carbon paper for this. Since metal is a very tough material, it is coated with white or light paint. The transfer process begins after the varnish has completely dried, which is applied just before the start of the main work.

Instruction manual

This method requires compliance with the following rules:

1. The pattern is very tightly attached to the product. To do this, you can use a soap solution.
2. Many masters for this work use embossed embossed. With it, the image is very accurate - almost jewelry work, which, however, takes a lot of time and requires some preliminary training.
3. The tool is taken with three fingers, resting on the nameless one, which serves as a kind of spring. The embossment is located 2-3 mm from the picture, its light strokes form a dashed line - the main contour of the image is drawn. The smaller the detail of the picture, the denser it breaks through.
4. When all the lines are transferred, you can wash off the paint.
5. The image can be varnished.

Now you know how to transfer a pattern from paper to paper, to leather, to glass, to wood and to metal. Go ahead - for the tools, and good luck in your endeavors!