Ornaments and fancy patterns made of ceramic tiles today do not surprise anyone. But sometimes I want to do it myself, and not hire professionals, I want to put my whole soul into work. And then the question arises of how to cut ceramic tiles, and how to do it right. Such a need will definitely arise during the repair. After all, tiles have to be laid over large areas, on different surfaces, at unequal angles.
How to cut ceramic tiles?
The first thing that comes to mind is a glass cutter. This tool is useful for performing work that is small in volume. And also if you need to quickly cut tiles. But large volumes of work are not subject to glass cutting. After all, the use of this tool requires utmost care and concentration. It will take all the time to ensure that the incision is in the right place. On a kitchen scale, it will be difficult to do all this. How to cut? The tile must be on a solid, level surface. Now you can roll the glass cutter, directing it “towards you”. It should be pressed evenly. As a result, a visible strip will remain on the surface. You only need to break the tile.
If the question of how to cut ceramic tiles is still not settled for you, try one of the varieties of tile cutter. It can be used for large volumes of work. And you practically will not expend efforts. The tile cutter can be electric and manual. The latter is considered by many to be the most convenient and simplest device. But a
manual tile cutter will not cut a strip whose thickness does not exceed 6 millimeters: the edges will be uneven. But if you need to cut the whole into larger parts - this is ideal. The electric model will speed up the process as much as possible. It makes it possible to obtain thin strips, and curly patterns, and so on. One of the advantages of such a tile cutter is that the work is clean, because all the particles and dust are deposited in a special tank with water.
How to cut ceramic tiles with a tile cutter? Consider a handheld device. The tile is attached inside it. You must keep it level and move the wheel “away from you” to the edge. Distribute pressure evenly. But if you press hard, the tile may crack. At the end, you need to press the handle of the device. As a result, the tile breaks evenly. It is necessary to use the electric model approximately according to the same principle.
How to cut ceramic tiles yet? You can grinder. This device combines the advantages of the two above-described "brothers" for their intended purpose. The cutting speed will be high, and it is very simple to apply. How to cut ceramic tiles with a grinder, even an inexperienced repairman will understand. However, there are grinders and disadvantages. The cut edge is often uneven and needs to be machined. In addition, you will find a huge amount of dust. Be sure to wear glasses and a respirator. And how to cut ceramic tiles with a grinder? The mechanism of action is similar to a glass cutter. Plug the device into a power outlet, press the "Start" button. When the disk reaches sufficient speed, get to work. You need to move "on your own." It is necessary to be extremely careful. Due to one awkward movement, you can lose a pair of fingers.
Thus, cutting ceramic tiles is within the reach of everyone. All you need is a suitable tool and a little skill.