If you want to glue the ceiling plinth, but you don’t know how to do it best, then we suggest you familiarize yourself with this process. Many people think that there is nothing particularly complicated in this task, but as soon as it comes to completing this work, a lot of questions immediately appear. Therefore, to keep them as small as possible, we will try to reveal the topic as fully as possible.
First of all, it would not hurt to figure out what a skirting board is and what they eat with it. In fact, the more correct and scientific name for this decor element is the fillet. Stick it between the walls and the ceiling, after which the joints between them are puttied and painted. Fillets are designed to hide small flaws after wallpapering, as well as give the room a more complete look and just decorate the ceiling.
And now we turn directly to the question of how to glue the ceiling plinth. First of all, you need to find out the consumption of materials. To do this, you need to measure the perimeter of the room and determine how wide the fillet you want to see on your ceiling. But even knowing the area of the room, try to buy a baseboard with a margin, because it will have to be cut, and you can accidentally make a mistake.
Next, you need to decide which of the two ways you are going to attach the fillets: they can be glued directly to the wallpaper with glue, or you can use putty before the wallpaper is pasted. The first way, how to glue the ceiling baseboard, is simpler and more convenient in its execution, because it allows you to make an imperfect joint when gluing wallpaper, which eventually closes with a fillet. Secondly, gluing fillets with glue is much more convenient than using putty. But this method has its drawbacks: firstly, it is more expensive, and secondly, you have to glue, putty and paint the skirting so carefully that none of the solutions get on the wallpaper. Experts believe that the second method, how to glue the ceiling plinth, is much better, since the dirty work happens before gluing the wallpaper, and the fillet looks more impressive. But of course you should choose.
You always need to start gluing the baseboard from the corner of the longest wall, and it is here that some problems begin to arise: before you spread the fillet with glue or putty and attach it to the right place, you must first cut the corner. For this, a hacksaw and a miter box will be needed. For those who are not in the know: the miter box is a special device in the form of a tray designed for cutting beams and various boards at a certain angle. If not, and you do not know how to glue the ceiling plinth in the corners, use a regular sheet of paper. Its angle is 90 degrees, and since you will need to cut the edge at an angle of 45 degrees, just fold the sheet so that the fold line passes through its corner, and the edges of the paper exactly match. This will give you a guideline that you can use to accurately trim the fillet. But even when you cut it off, do not rush to glue it right there, it is better to once again attach the baseboard to the wall in order to make sure that there are no errors. And if there is, then they can always be corrected.
Now that all the corners are fitted, you can start gluing. If you glue on putty, then remember that it should be quite thick in its consistency, this guarantees adhesion, therefore, the fillet will not once fall on your head. Attach the baseboard greased with adhesive to the corner between the ceiling and the wall and press it firmly so that excess mortar “squeezes” out. Then all that is superfluous is simply removed with a spatula and a brush moistened with water, and the joints, after the adhesive has dried, are either carefully puttied or sealed with a special silicone sealant. If this is not done, the fillet will look extremely messy and will only spoil the general appearance of the room. Knowing how to glue a ceiling plinth, you can easily do it yourself, which will significantly save your family budget.