Due to the fact that vinyl siding is a material with excellent quality characteristics, it is often chosen for finishing the pediment of a private house. You can be sure after completion of the work that the walls will be reliably protected from moisture.
Benefits of siding
Siding excellently copes with precipitation, and also does not fade in the sun. Vinyl finishing material is today considered the most optimal option for cladding. If you will be siding the pediment with siding, then you can not be afraid that you will have to carry out extensive preparatory work. For such manipulations, you can use the basement finish, which is impressive in strength. But the most commonly used vinyl siding.
In the store of building materials you can choose from a huge assortment of finishing material, which has many colors and textures. This allows you to get a building decorated in an original style. Moreover, you can create a pediment that cannot be found on any other house. This is most attractive for a private consumer who carefully compiles the exterior and independently works on its solutions.
Why you should choose a siding for finishing the pediment
Sheathing of the pediment with siding is most often done for the reason that the alternation of colors of the material looks very impressive and original. Vinyl sheathing is easy to install, it can be installed without the help of professional builders. This allows not only to save money, but also to carry out work in the shortest time. This material does not have such an impressive cost, and a variety of textures and colors can impress any consumer. After sheathing, you can not worry about the fact that the walls of the house will be exposed to adverse external factors. The resistance of the material to high humidity and temperature changes guarantees a comfortable and warm microclimate in the house.
Among other things, the sheathing of the pediment can be accompanied by the installation of insulation material, which significantly reduces heat transfer from the base of the roof. This is especially important for private homes for the reason that about 30 percent of heat loss occurs precisely through the roof. Siding is durable and durable, over time it does not lose color under the influence of ultraviolet radiation. That is why such a material is an economical and durable finish.
Sheathing of the gable siding can be carried out by installing the material on the wall surface. It can be brick, wood, reinforced concrete blocks, as well as stone. It is important to note that rarely facing the house allows the use of heat-insulating materials, which cannot be said about siding, which suggests the possibility of using a heater that is suitable for the consumer in cost and effectiveness.
Tool preparation
Work is not possible if the master does not prepare certain materials and tools. It is important to make sure that you have a mounting knife, plumb line, building level, drill, tape measure, steel ruler, hacksaw for metal, mounting foam, galvanized nails, and self-tapping screws.
Most often, in the absence of any tools, home craftsmen use rented appliances. This is the most appropriate approach for those who plan to do exclusively the decoration of their own facade. Some hardware stores provide the opportunity to rent the necessary tool.
Finishing the gable with basement siding
Quite often, the decoration of the pediment is done using the basement textured siding. Thus, it is possible to obtain a design that is attractive and respectable. At the same time, the master will not have to invest heavily in the acquisition of materials.
Basement siding is often chosen for the reason that it is able to perfectly simulate the texture and color of natural materials such as wood, masonry or brickwork. He is able to reliably protect the pediment from external influences. Using this material, you can lay out an interesting and complex drawing by combining textures and colors.
Gable preparation
Do-it-yourself sheathing of the pediment by the siding implies the need for preparatory work. They consist in cleaning the surface of old paint, all kinds of dirt and dust. If you have to work with a wooden pediment, then it must be treated with a deep penetration primer, which is able to protect against mold and rot. In addition, you need to analyze how smooth and dry the surface is. Level differences for installing siding should not be more than 10 millimeters. Otherwise, the cladding may go in waves, which will change all the original linear dimensions.
Frame system installation
Do-it-yourself siding of the pediment requires the installation of a frame system. If you have to work with an old building that has an uneven surface, then the installation should be carried out exclusively on the frame. This will guarantee the longevity of the cladding material, and will also help level the base of the pediment and insulate the attic. If the installation is carried out on a new building, then mounting the frame for this is optional. If you intend to place an attic room under the roof, then it is simply necessary to install heat-insulating material, as well as carry out waterproofing work.
The distance between the elements of the crate during installation should correspond to the dimensions of the panels. When siding the gable of a house is done, the photo of which you can see in the article, as a rule, the distance between the components of the crate is approximately 30-40 cm. Among other things, all elements must be installed strictly vertically. The correct position of the frame system can be checked using the building level.
Frame Installation Guidelines
Sheathing of the pediment of a house can be done using a galvanized steel profile, which forms the basis of the frame. Its installation is carried out on special mounting suspensions. It is preferable to install galvanized steel galvanized profiles. This material is lightweight and does not exert additional load on the foundation and walls of the house. In favor of galvanized metal, one can also say that it is not exposed to moisture, does not rot, and also does not rust. It is worth considering that a metal profile will cost more, but the high price will be offset by the strength and reliability of the structure.
Installation of panels on the pediment
If you will be siding the gable siding, step-by-step instructions will help in the work. For installation, it will be necessary to prepare the fittings, namely the external and internal corner profiles, the start profile, as well as profiles of type J. In addition, you will need soft panels. If arched windows are located on the pediment, profile J will be simply irreplaceable.
Initially, fittings for mounting panels should be installed. This must be done in a certain sequence. Initially, vertical internal and external profiles are installed, which are called corner profiles. Fixation of these elements starts from the upper mounting hole, it is necessary to advance from top to bottom. Profiles should be mounted strictly vertically, while you should not focus on the roof rafters.
Sheathing of the gable siding, the photo of which is presented in the article, suggests the need to use a plumb line, as well as a water construction level. These tools allow you to analyze the correct installation. Along the perimeter, start profiles are to be mounted. When working with elements that should be located around the window, you should use window and finish trims.
Wizard Tips
Profiles must be placed in increments of 25 cm, while the corners should be mated at the bottom element, while it is important to leave a gap of 6 cm between the back "cheeks" and the overlap. After the hardware has been mounted, you can proceed with the installation of the cladding panels. The technology of the work suggests that it is necessary to start installing these elements from the bottom row. During installation, leave a gap with a maximum width of 10 millimeters. This distance will be necessary when the material undergoes thermal expansion and contraction.
Features of working with spotlights
When the siding of the roof gable is made, heat-insulating materials can be installed. At the same time, you must provide for a ventilation space that should be left between the casing and the wall. The diameter of the ventilation hole should be 1/150 of the attic area.
When installing spotlights, it is necessary to mount solid and perforated strips. The latter are necessary for ventilation. Spotlights should be installed before the installation of siding on the walls is completed. In this case, it will be quite simple to leave a gap for thermal expansion between the final panel and the rail. Sheathing the gable with metal siding implies the need to use spotlights, which should begin to be installed from the receiving profile. The latter must be placed on the overhang of the roof.
At the next stage, the level will need to set the elevation to set the receiving profile. If during installation of this element on the wall there are some problems associated with unevenness of the base, then this fact can be quite simply fixed by laying large wooden blocks that should be located under the fittings. The technology of mounting the soffit strips requires the use of receiving profiles on the overhang of the roof and on the wall, while these elements must be placed strictly parallel.
Work on the installation of the chamfer
Roof pediment siding may require the installation of vinyl chamfers. For the reason that windshields on roofs are usually made of wood, they need protection from moisture. When installing the chamfers, it is necessary to provide a gap for the thermal expansion of the material, its thickness should be equal to 2.5 cm.
The main features of the installation of siding on the pediment
The siding lining of the gable cornices is made according to a certain technology, which does not allow tight twisting of fasteners. Between the material and the head of the screws, the master must leave a temperature gap. Between the fittings and panels, you also need to provide a distance whose width can vary from 5 to 10 cm. This parameter will vary depending on the compression and expansion of the material at temperature extremes. If you decide to start facing the pediment in cold weather, then the panels must first be kept in a warm room, leaving the material there for 12 hours or more. This is required in order for the finish to gain the flexibility necessary for installation.
Conclusion
Installing siding on the pediment of the house is possible if you follow all the rules for installation. It is important to purchase the full range of materials and tools. Only then the master will be able to carry out work in the shortest possible time and get the expected result. And siding the gable of a wooden house will be quite an easy task. Stock up on tools, knowledge and patience - then you will get a truly comfortable home.