Today, many solutions to the problem have been developed, which consists in painting surfaces with water-soluble compounds. One of them is the use of a roller, while it is important not only to choose the right paint and varnish coating, but also the tool itself, which can be made of different materials. You can use a regular brush, but the strokes will be too noticeable, which is unacceptable for the ceiling. The surface will look unevenly colored. However, you should not refuse to use the brush, as it will be needed to paint over inaccessible places and corners.
Roller selection
If you are faced with the question of how to paint the ceiling with a water-based paint, then you should consider the tools available on the modern market. The working part of the roller can be fleecy, velor or foam. Prices for these products are not too different from each other and can be misleading to the consumer. Despite this, the tools differ from each other, and the selected roller will be able to affect the quality of painting.
If you are tormented by the question of how to paint the ceiling with a water-based paint, then you should pay attention to the experience of most consumers, which indicates that the product with the threads that form the pile is best established. Foam roller cannot compare with a fleecy product due to its high ability to absorb paint, as a result of which the composition accumulates on the ceiling surface and can form bubbles. But velor tools are able to capture not so much paint, so the described problem is eliminated.
If you need to paint a large surface area, you need to give preference to a wide roller, which will complete the work in a shorter time. The length of the pile of the paint tool will depend on the variety of the surface to be treated. If you decide to use fire retardant paint, then it is best to use foam or fluffy options. If you are still thinking about how to paint the ceiling with a water-based paint, it is best to prefer a fleecy product, the filaments of which are of medium length. In this case, it will be possible to achieve not so impressive ink absorption, so you can easily apply the composition to the surface of a large area. But a short pile can even leave unpainted places.
Specialist advice
When the ceiling surface in the room has a rough structure, you need to pay attention to products with a long pile, only with its help you can cover the entire texture by filling in the recesses. At the same time, it is not recommended to use a tool made of foam rubber, this also applies to the case when the handle is attached with a bolt, because such solutions quickly become unusable.
Quality check
Many home masters before starting repairs think about how to paint the ceiling with a water-based paint. It is important, when shopping, to be able to independently check the tool for quality. To do this, it is clamped in the hand, and the working part should not be deformed. It is important to pay attention to the seam, which should not have an obvious junction. If it does exist, streaks may be left on the surface during painting. Experts advise pulling villi, which should not be pulled out. Otherwise, elements spoiling the appearance will remain on the surface to be painted.
Tool preparation
When the roller for the ceiling is selected, you must take care of the availability of utensils for working with the tool. If you want to achieve a positive result, it is best to abandon the use of a conventional bucket. Only use a special tray that is intended for painting surfaces. Among other things, it is necessary to prepare a telescopic pipe, which will eliminate the use of scaffolds. After all, not every home master in the arsenal has stepladders and other similar devices. But with the help of a telescopic pipe you can easily reach hard-to-reach places.
In more detail about each type of roller: foam rubber
Those consumers who are thinking about which roller is better are considering all the options, among them a foam product should be highlighted. Its main advantages are low cost and general availability, as well as the ability to choose a product from a material of different textures. Experts advise to pay attention to the density of foam, which determines the resistance to mechanical stress. By purchasing such a tool, you should be prepared for the fact that the paint consumption will be increased, because, as mentioned above, foam rubber absorbs the composition in an excessively large volume. If you have to process a large area, then the surface can acquire an uneven shade, because the paint will absorb into the foam and will form bubbles.
Velor Roller Features
When deciding which roller it is best to paint the ceiling with water-based paint, you can consider velor products that are suitable for smooth and even surfaces. This material is synthetic and costs less compared to mohair rollers. The undoubted advantage of velor is its resistance to the negative effects of solvents. But the master when using this tool may experience some inconvenience, which is expressed in poor absorbency of the paint material. For an even and uniform coating, you will have to dip the tool into the solution too often, this can be inconvenient.
Features of fleecy rollers
Paint the ceiling with a roller can be done using a tool that has a pile. For hard surfaces, it is best to dwell on a product with long threads. The base material will affect the cost. Thus, rollers made of natural felt and fur will cost more in comparison with artificial substitutes. The quality of the coat will determine the results of staining, so you should not save on the tool. As practice shows, the pile has some advantages, namely the ability to adjust the absorption of paint, carry out decorative painting work, as well as the ability to create a uniform coating of porous and rough surfaces. It is worth remembering that decorative work is best obtained using a short-nap roller. And if you prefer natural material, then the tool will serve more than one repair.
Methodology
Before painting the ceiling with water-based paint, it must be diluted to the desired consistency, following the recommendations in the instructions. Most often, ten percent water is required. Be that as it may, it is necessary to mix the composition yourself, using a drill with a nozzle. It is not necessary to use the roller with which the primer was applied. For water-based paint, it is best to use a new tool or replace the working part. If you are faced with the question of how to paint the ceiling with a water-based emulsion, then you should know that you should not completely dip the tool, you just need to dip it slightly. The composition should be evenly distributed on the surface of the coat, for this the roller is rolled on a pallet, but not on the surface of the ceiling. If it is not possible to wet the working part of the roller evenly, then you will encounter unpainted areas where spots will form.
Professional advice
Before you start painting the surface of the ceiling, you should practice on some part of the wall or a piece of drywall. This will allow you to avoid many mistakes.
Work process
It is necessary to start painting the ceiling exclusively in the daytime, it is best to use additional illumination. It is necessary to start work from the far corner or from the side of the window, moving towards the door. The paint should be applied as evenly as possible, the process should not be delayed. The application must be carried out in parallel stripes, with each next overlapping the previous 100 cm. On the surface, the paint should be rubbed as carefully as possible, making sure that it does not dry out on the edge.
When working, the master is not recommended to tear the roller from the surface of the ceiling, and the flow rate of the composition is controlled by pressure. From time to time it is necessary to move away from the area to be painted in order to check whether unpainted zones have formed. If all such errors have already turned out, then they can be corrected by the technology of grinding the painted surface with sandpaper with a large number. Each subsequent layer is applied perpendicular to the previous one, and it must be applied only after the paint has completely dried.
Conclusion
Before starting work, every master should think about what is needed to paint the ceiling in the apartment. Among the tools, a roller, a container, and a brush should be highlighted. It is desirable that a set of interchangeable fur coats be attached to the roller. This will simplify the work and also eliminate the need for a repeated visit to the store if the coat is damaged. You can choose a roller also with limiters, as well as regulators. The presence of such auxiliary elements increases the cost of the tool, but facilitates the process of work.