Improvement of the site can be quite an exciting activity for a summer resident, but it can not always be called easy, in addition, such work is time-consuming. But it is especially interesting to create exterior elements that will decorate the adjacent area, and you can do such work without spending money. The most effective, but rather simple option will be street flowerpots. With your own hands you can make them from improvised materials. To do this, use:
- car tires;
- old dishes;
- stumps;
- concrete.
If your choice fell on tires, it is best to prefer winter studless tires, as they are easily amenable to cutting. The tire must have a rim that will serve as a stand for the structure.
Tool preparation
If you decide to make street flowerpots with your own hands, then you should prepare some tools and materials, among them you should highlight:
- grinding machine;
- pencil;
- primer;
- paint;
- sharp knife;
- soap solution;
- paint brush.
Marking and contour cutting
For work, it is necessary to use a tire, which must first be cleaned of dirt and laid flat on a flat surface. Around the metal disk with a chalk or pencil should outline the cut line. It can be smooth, zigzag or wavy, a solution will tell you a fantasy.
If the cut is supposed to be made curly, then the protrusions should have the same shape and size, otherwise the border will not look very neat. On the drawn line in the next step, it is necessary to cut off the upper sidewall of the product. To facilitate the process, it is necessary to periodically wet the knife in a soapy solution. For the formation of a figured contour, it is recommended to use an electric jigsaw, its blade should first be dipped in the same soapy solution.
The methodology of the work
If you decide to make street flowerpots with your own hands, it is recommended that you study the master class presented in the article before that. From it you will be able to understand that at the next stage the tires are turned upside down, you should step on the rim with your foot and pry off a small area of rubber by turning the product around. This will require physical effort, but the more the tire turns out, the easier the process will go. On this, we can assume that the flowerpot is almost ready, it will only need to be given the perfect shape by processing the sections and decorating the structure from the outside.
Figured edging can be made in the form of rounded or sharp petals, triangles or fringes. Use a sharp knife for this. Slices are processed by a grinder to make the edges perfectly smooth. When flowerpots are done outdoors with your own hands, it is recommended to consider the photo. They will allow you to understand what method to act on.
Specialist recommendations
The next step is to decorate the product. To do this, its outer surface is cleaned and degreased, and then covered with a primer. Once the rubber has dried, you can start painting it. In this case, there are many options. Some masters make flowerpots plain or two-tone. On the surface, you can depict stripes or draw an ornament, as well as flowers. Everything will depend on your skills.
The most winning solution will be the decoration of a flowerpot in the form of a flower. To do this, you can use oil nitro paints, enamel compositions, car mixtures in spray cans. The inside should also be painted, because it is viewed from the side.
Making a flowerpot from concrete
Flower pots street concrete with their own hands are also quite often made by home craftsmen. These works cannot be called complex. For pouring, it is best to use factory molds made of plastic. Wicker baskets, cardboard boxes, old basins, buckets or bowls are suitable.
For work should be prepared:
- sand;
- cement;
- shapes of different sizes;
- container for kneading the solution;
- plastic tube;
- knife;
- vegetable oil;
- water.
When preparing a plastic pipe, one should prefer one with a diameter of 1.5 to 2 cm. As for the length, it should be equivalent to 20 cm. If you could not find a spray gun in the arsenal, you can replace it with a brush. Two plastic bowls can be a form, their diameter should be different.
Mortar preparation, mold and concrete pouring
Do-it-yourself street flowerpots for flowers, as practice shows, are quite simple to make. This is especially true when it comes to concrete. To mix the solution, prepare a container in which 3 parts of sand and 2 parts of cement are filled. The ingredients are mixed, after which water should be added to them. Mix the solution well so that there are no lumps left.
If you want to make the flowerpot more decorative, then you can add coloring pigment to the composition. The finished mixture should be moderately thick and homogeneous. When street flower pots are made with concrete from the hands, you need to prepare a larger bowl, the inner surface of which is coated with vegetable oil. The other is processed outside.
The plastic tube should be cut into 4 parts, each of which will have a length equal to 5 cm. Now you can start pouring the solution. A layer with a thickness ranging from 2 to 3 cm is poured at the bottom of a large bowl. Pipe sections must be installed in it, placing them closer to the center of the container. After the solution has set, a smaller bowl should be installed in a large container, and the space between the walls should be filled with the solution. In order to prevent the bowl from shifting during pouring, it is necessary to lay a brick or stone on its bottom. The top of the solution should be leveled with a trowel and leave the structure in this state for two days.
Specialist recommendations
You may well be able to make flower pots street with your own hands. At the next stage, the inner container should be removed, while ensuring that the edges of the product are not damaged. The concrete should be moistened and wrapped with a film. For two weeks, the flowerpot should be periodically moistened and covered from ultraviolet radiation.
After 7 days, the container turns over, it must be knocked out of shape. If no suitable bowls were found, then boxes made of thick cardboard can be used for the flowerpot. Seams should be reinforced with tape. In a smaller box, cut the bottom, and pour clean sand with a thin layer on the bottom of a large box. Part of the solution is poured to a height of 3 cm, from above it will be necessary to install a box without a bottom.
The space between the walls is filled with mortar, and after a week the boxes must be removed, while a hole for drainage should be drilled in the bottom of the flowerpot. Do-it-yourself street flower pots using the same technology can also be made using wicker baskets, old buckets or other containers. In order to give the surface an interesting shape, the walls need to be laid out with embossed leaves, thin spruce branches or flowers. After you color the product, it will look even more attractive.
Interesting ideas for flowerpots: the use of stumps
Vases of stumps will look very harmoniously and naturally in any garden. For their manufacture, cuts or even stumps, the diameter of which reaches 40 cm, are suitable. Birch stumps are considered the most decorative. For work should be prepared:
- circular saw;
- drill;
- antiseptic mixture;
- pencil;
- a chisel.
Stump processing
Do-it-yourself street flowerpots for flowers, the design, the ideas of which are described in the article, can be made of natural materials. This should include the stumps of old trees. The top of the stump needs to be cut to get a smooth surface. The bark should be left in place, in which case the product will look more natural. On the cut, you need to mark the circle, departing from the edge of 8 cm.
Holes should be drilled around the perimeter of the marking, the depth of which will reach 10 cm. At the next stage, you need to select the chisel core. Now it’s worth preparing the foundation. The walls of the future flowerpot are aligned vertically. Now you can drill several drainage holes, placing them at the base.
Flowerpot from a plastic pipe and branches
If in appearance you were attracted by street flowerpots, you can make them yourself from pipes. Such designs are great for country style. The product will have a cylindrical shape, because a plastic pipe is taken as the basis. For the decor, you need to prepare even thin thin branches of a tree and burlap, they are easy to find at the felling in the forest.
The plastic pipe for work must be cut to the desired height. A round stone is driven inside, so that it reliably lies to the bottom and does not fall out. This will add stability to the structure. Outside, the surface of the pipe must be wrapped in burlap, bending the edges inward and fixing on liquid nails. In this case, there is no need to achieve special evenness, because the fabric will be covered with branches. Do-it-yourself street flowerpots for flowers from improvised materials are quite simple to perform. At the next stage, twine or jute thread is necessary to connect the branches into a single whole, connecting a simple knot. If the flowerpot will be low, then just tie it up from below and above. If the length is more than a meter, then the branches need to be connected also in the middle.
Making a pot of cement and fabric
Do-it-yourself street flowerpots for flowers made of cement and fabric can be done. To carry out such work, you must stock up:
- an old bucket;
- cement grade M-500;
- a pair of rubber gloves.
The old bucket must be turned upside down and put on a raised platform. From below, the ground is covered with foil or cardboard, so that the flowing concrete does not spoil the landscape. For fitting, a rag is thrown onto the bucket, which is planned to be used to create a flowerpot.
In a basin, you need to dilute the cement with water to get a consistency of thick sour cream, pouring a little Fairy there. A rag is immersed in the solution, left there to be soaked with concrete. The outer surface of the bucket is lubricated with vegetable oil so that the form does not stick to it.
At the next stage, the impregnated material is removed and, as such, is thrown onto a bucket. It is important to shape the future design. Such outdoor flowerpots for flowers with their own hands from pipes and fabrics are made according to a certain technology. It involves drying the product within three days. With some periodicity, the surface must be sprayed with water, this will increase frost resistance. After 3 days, a bucket is taken out from under the flowerpot, while the product itself can be turned upside down and left for a week under a canopy. The finished vase is covered with a primer to reduce porosity, and after that it can be painted with acrylic composition or decorate with varnish for outdoor use on stone and concrete.
Conclusion
Now you know how to make street flowerpots with your own hands from cement, rags, tree branches and other materials. You can use even crushed stone for such work. To do this, screw the screws on the surface of the plastic mold, the caps of which should rise 2 mm above the surface.
The hats are braided with nylon thread to create a framework on which the cement slurry will be held. It is laid out on the surface at the next stage, and it is necessary to start from the bottom, immediately laying out the stones, while you need to try to arrange them as close to each other as possible. Such a vase must also be dried within 4 days.