Neodymium magnets are now very widely used. It must be recalled that these bodies are the most powerful in terms of magnetic force. Even with the passage of time, they do not lose it. But sometimes it happens that two objects are attracted to each other, and it becomes almost impossible to separate them back. In this article, you can find the answer to the question of how to separate two magnets.
Disconnection
First of all, it should be noted that it is unrealistic to simply break two cohesive powerful magnets. Speaking about how to separate the two magnets, it should be noted that you should not even use your forces for these purposes. The maximum that you can do is to separate objects a small distance from each other, after which they will stick together again, and your hands may be injured. The collision force of such neodymium bodies is comparable in the release of energy from a heavy hammer blow on an anvil. That is why you should not experiment if you do not know how to separate the two magnets. Let us consider in more detail 4 effective methods that help to cope with this problem.
Wedges
How to separate the two magnets with the help of non-magnetic wedges? First of all, you should pay attention to the fact that for this purpose it is better to use wooden tools. They are inserted between the magnets. Then the adhesion decreases, after which you must make every effort to separate them with your hands.
Guillotine
How to disconnect two magnets at home, the power of which is 180 kg or more? To do this, you can use the improvised guillotine, for which a desk, door or chest of drawers is ideal. The basis of this method is the principle of cutting one magnet from another, however, a door jamb or a frame of a chest of drawers or a desk will act as an immovable supporting element. As the shift mechanism will perform a drawer or a door. For this method, furniture of only high-quality assembly from chipboard, or a wooden door, is suitable.
Wooden guillotine
How to disconnect two magnets at home? You can use a wooden guillotine for bodies more power. To do this, one magnet is placed in the hole in the wall, and the other with a large lever should move to the side, giving the opportunity to split them.
Own power
Magnets with a power of less than 150 kg can be broken with your own efforts. For this, sticky bodies must be placed on a flat surface so that the gluing line is located on the edge of the cabinet or table. In this case, you should pay attention to the fact that one magnet should lie on the pedestal, and the other should hang. With one hand you should hold the object that lies on the surface, and the other should firmly hold the second magnet. In this case you need to make every effort to derail it. The force should be directed vertically, that is, go perpendicular to the plane of the cabinet or table. After disconnecting the magnets without fail, one of them must be postponed at a distance of at least half a meter from the other.
If stuck to another surface
If your neodymium magnet is magnetized to the front door, the battery, the sewer hatch, the car body, then it will also be very difficult to remove it with simple movements. If the surface is even and smooth, it will be easiest to detach the object by dropping it to the very edge of the metal sheet. Otherwise, most likely, it will be necessary to use wooden wedges, which were discussed above.
There are several ways to separate the two stuck together magnet. Most often, this activity requires not only a certain physical strength, but also ingenuity.