In 2007, AvtoVAZ specialists together with Italian designers released a new model. This is the “Lada Priora”, which was immediately liked by the domestic car enthusiast for its low cost, accessibility, reliability and the broadest possibilities for various upgrades. Moreover, it is done on a Priora car by tuning yourself without the need for the services of other people or special ateliers.
The appearance of this car influenced the formation of a separate trend in this matter.
A new trend has appeared - the designer and specialists create a completely new, stylish, attractive and original model from an inexpensive domestic car that would stand out among more expensive models with its appearance and technical characteristics. Take a look at how you can do your Priory tuning yourself. Photos of the most beautiful and unique modifications are here in this article.
Directions of improvements
Speaking conditionally, a set of measures to improve the car can be divided into several stages. So, first of all, the factory appearance of the machine changes. Then various modifications of the cabin are introduced, aimed at increasing comfort and equipment. Then you can do various improvements and improvements in the technical part. We will consider each stage of this complex, and then you can try to change your car.
Priora: DIY tuning. We work on the appearance
They recommend starting work with a modification of the geometric parameters of the bumpers, as well as the hood. You can install universal bonnet stops. They will help to solve the defects of the manufacturer.
Bumpers that can be installed on this model are easily purchased in the respective stores. Today their choice is available for every taste. For example, the “Sniper” or “I am a robot” model is light and made of plastic.
You can also purchase fiberglass products. There is an option to order a product for an individual order. Bumpers for your project can easily be installed on existing fixtures. To do this, you do not need to modify or modify anything. This is an inexpensive, but quite effective DIY tuning. "Lada Priora" will change before your eyes.
Replacing bumpers will not only fully refresh the appearance of the car. It also allows you to improve some technical parameters. So, simply replacing the bumper with a wide opening for air intake can significantly increase the speed at which the engine will cool.
To change the appearance, you can also add plastic linings, as well as spoilers. This will completely change the design of your car.
We work with the grille
You replaced the bumper - the car already looks more attractive. But you can do even better. Here you can replace the grille. You can independently make this product from strips, in the form of honeycombs or in any other style. There are several different options for this.
You can order a replacement grille, but do not replace the front bumper. This is very economical, but not always such a grill will be able to transform the front so much.
The second method involves replacing the grille with the bumper. These modifications will greatly affect the appearance and style.
Tuning lights
While working on the front end, many do the tuning of the Priora headlights with their own hands. So, you can install cilia, bilins. All this in the best way affects the originality and uniqueness of your car.
And if you also replace the factory side lights with LED ones, then this not only allows you to uniquely style, but also gives a brighter light. You can also convert turn signals into side lights. This will expand the functionality.
Many tinted taillights. Such a tuning of the Priors do-it-yourself hatchback together with a set of the original body kit will make people turn around and look after your car for a long time.
The final touch
Today it is very fashionable to fit the body with various materials. So, you can fit the entire body or its individual parts with vinyl. Very popular today is a coating that mimics carbon. Or you can buy a carbon film and make a real carbon coating in both 2D and 3D.
Airbrushing is the best tuning that can ever be.
Thus, you can realize any, and even the most daring fantasies. In this case, everything will look very, very impressive.
You can apply this by doing tuning (“Priora” do-it-yourself sedan will be transformed before our eyes) on 2170 models. All this can also be done on hatchback bodies.
Salon works
How to make interior tuning? Do-it-yourself Priora is equipped with new lighting. For example, a shade that is installed at the factory does not give bright light. The light from the ceiling is very dim and directed in one direction.
This situation can be changed very simply.
To do this, it is recommended to replace both the shade and the LED lamp instead of the standard one. Such refinement will allow to shift the central lighting.
There are many possibilities for organizing the illumination of door handles. For the most daring and original, it is proposed to mount LED strips under the front seats to illuminate the floor of the Lada Priora car.
Interior details at the factory were made of plastic. During tuning works, they can be covered, for example, with leather or a carbon-based film. This will add zest and wealth to the interior.
It is recommended to pull and chairs, both rear and front. You can make covers yourself or order from third-party specialists. As for materials, leather is no longer a trend. Now it’s fashionable to sit on fur or flock chairs. This is a great and original interior tuning. Do-it-yourself Priora is being finalized very quickly.
Dashboard
If we compare the Priora with past models from AvtoVAZ, then the interior here is much more attractive. It must be noted that when creating the designers used a special high-tech plastic, which in its appearance resembles a leather surface. Options "Suite" is characterized by additional modifications that add to the interior solidity.
But, despite all this, DIY tuning of the Priora panel can significantly change the appearance and also improve functionality.
Improvements must begin with the organization of the backlight. To complete this task, you will need some tools. It is also worth stocking up with LEDs and reflective foil.
The first step is to remove the panel. In fact, it is very simple - everything is done with an ordinary screwdriver. Then the main devices are disassembled. Remove the dials, the arrow and the overlay.
Many remove factory spraying from numbers. And then when illuminated, they will glow in bright white. However, it is too simple and may not be suitable for those motorists who want to make the interior solid and expensive.
Still looks great way with gluing on some elements of the panel inserts made of cellophane in different colors. To do this, stock up on packages and cut out some of them. These pieces must be glued to the inside of the panel. For example, imagine the part of the speedometer where the top speed is marked. It is quite spectacular.
Of course, all this is quite commonplace. And if the car enthusiast can independently dismantle, and then disassemble the instrument panel, then the backlight should be replaced.
Replace the dashboard light
As a result, the lighting will be more even and calm.
To achieve this, you need to purchase bulbs and LEDs. At some intervals, the panel perimeter should be glued with pieces of LED tape. Then the tape and the contacts of the factory backlight are connected.
Together with the backlight, it is recommended to replace the display filter. You can simply replace the entire filter, or just leave the backlight in white.
It looks very original on the arrows. For this you need 10 CMD diodes. Using a soldering iron, these diodes are soldered into the glass panel from the outside opposite the arrows. Resistance sensors are soldered inside.
Modify the console
The main problem here is the sounds it makes when moving. Eliminate this by dismantling, and then applying an additional coating to the housing. Glue to where the console panel touches the cladding. Do-it-yourself tuning on a Priora car will allow you to enjoy the silence while driving.
Technical upgrade
The regular power unit, which is located on the Priors, with proper maintenance and operation behaves as it should. But if you approach this issue correctly, then there is every chance of increasing the engine power by as much as 40%.
Modernization includes the installation of a mechanical supercharger, the boring of the cylinder block, the installation of low pistons and a high crankshaft. All this will help to make the car faster and faster.
Now do-it -yourself Priory engine tuning is easy. All the necessary components for this can be bought in specialized stores. In addition, this does not require any knowledge or skills from the driver.
For example, some install, as already described above, a compressor. It pumps a denser mixture of fuel and air into the combustion chamber, thereby increasing power by a factor of tens. But you have to pay for everything - an increase in power will entail an increased expense.
If you think that the compressor is too boring, then here it is - full-fledged turbocharging.
On a Priora car, do-it-yourself tuning can significantly increase dynamic performance.
But here you have strengthened the power unit, and then what? And then you need to strengthen the clutch as well - only then will it be possible to feel all the power without harm to your car.
There are many more nuances in technical tuning. All of them to consider is simply impossible. Since there is an ECU in the car, you can carry out chip tuning and play with some options.
Conclusion
If you have a Priora, do-it-yourself tuning is not only useful, but also necessary if you are tired of the standard look. You can do anything. There are no limits to perfection. You are free to change everything you want. AvtoVAZ has kindly provided you with an excellent workpiece - if you have the proper creative approach, then you will definitely get an excellent “charged” Priora.