Many cars are equipped with ordinary foglights, but now there is a lensed headlamp on sale. Such optics of the head light are quite effective. But little is known about the fog lights . After all, from the factory it is installed only on expensive cars.
Linz PTF
Since current legislation does not directly prohibit the installation of xenon optics, many motorists choose this type of lighting for themselves. Lens for xenon in this case is the most optimal. They make it possible to maximize the use of a xenon light source. In practice, the fog lamp lens provides a brighter light. With the right choice and installation, such optics will not cause inconvenience to oncoming drivers.
Installation of lenses is a guarantee of the most comfortable and safe movement due to the more correct formation of a light beam. In addition, with the help of lenses, you can give any car a more spectacular appearance.
The popularity of lenses for PTFs can also be easily explained by the versatility and other significant advantages compared to regular light sources. These advantages are especially noticeable when the lensed headlight is installed on right-hand drive vehicles, American cars - they all do not differ in particularly bright regular light. Also, lenses in PTF are installed on all other machines with not very successful optics. These include domestic cars.
The advantages of installing linzovannye PTF
Mounting lenses in fog lights provides a more accurate focusing of the light beam. Even if the visibility is poor, through the use of lenses the roadbed will be illuminated more brightly and efficiently. This allows the driver to see obstacles on the road in advance. Additionally, the motorist receives the following benefits.
The linz headlamp has a higher service life compared to standard halogen products. Often, even the most expensive lamp of this type has a service life of no more than three years.
The second major advantage is the efficient illumination of the roadway. Xenon and bi-xenon light sources have higher power. And thanks to the lenses, the stream of light is much better focused.
Linz fog lamps are more economical due to low voltage consumption provided that they are installed correctly. If the connection is made correctly, then the on-board network and the generator unit will work more stable in the car.
With proper installation, the car owner will never encounter heating optics during operation. If condensation or moisture gets on the xenon lamp, it will not damage it.
And finally, foggy linzovannye headlights on the "Prior" or any other car look more aesthetically pleasing than traditional PTF. And the lighting effect is even better than that of the main optics.
Linzovannye PTF and features of application
All these advantages will be especially important for cars with the right-hand drive - these are more often Japanese and British cars. For such models, PTF with lenses is a great way to improve the lighting for the right-hand drive in the European version without the need to replace the optics.
As already noted, linzovannye fog lights are perfect for American cars. Owners of such cars know that the light in these cars is bad. This causes some discomfort and trouble.
Also, lenses in PTF are shown to machines where the manufacturer installed regularly unsuccessful lighting devices. There are a lot of such cars - in particular, VAZ cars. Bixenon in this case will help bring the light closer to the expectations of the driver.
Installed xenon in linzovannye headlights will be able to appreciate the owners of cars with already reflecting or failed reflector in the headlight. Such optics are no longer able to properly focus the light stream. When installing lenses, the reflector will be used only as a basis for mounting.
The principle of operation of linzovanny PTF
In short, the module is a lighting fixture, which consists of a housing, a xenon lamp, and a special fixative lens. In addition, the design has a reflector and a special metal curtain.
The latter is designed to cut off the excess stream of light and open it if necessary. When the curtain removes excess light, it completely eliminates the risks of blindness of oncoming drivers.
The lensed headlights on the Lacetti and other car models fully guarantee optimal xenon beam focusing. PTF provides the most accurate distribution of the light beam in any lighting mode.
How to choose lenses in PTF
First of all, special attention should be paid to the body. It must be reliable and as durable as possible. It is also good if the headlight housing is resistant to high temperatures and aerodynamic. Resistance to high heat determines the reliability of the fog lamps for various changes.
It is also important to evaluate the financial capabilities and get acquainted with the cost of this equipment. It should be remembered that a good quality headlamp lensed on a Ford Focus 2, installed, should be expensive. Now the price of such lighting devices is one of the important factors, since frankly poor-quality and Chinese products can be found on sale in stores and car markets. The latter have a very low resource, which means that it is better to refuse to purchase such fog lights.
About fakes
The modern market for automotive lighting technology is full of various fakes. Sometimes, instead of xenon, consumers try to sell an ordinary blue-colored incandescent lamp. As you might guess, such linzovannye headlights on the “Solaris” are nothing more than a parody, and not a xenon light source. Often the price of such a fake is very low. Therefore, before buying it is always worth comparing the price of optics with its technical characteristics.
It should also be remembered that xenon fog lights are not a replacement for standard optics. Installing PTF instead of daylight is at least illegal. Therefore, you should be prepared for the risk of getting a fine.
Tips from professionals
Do not install xenon lamps by simple replacement. This can not only cause them to burn out, but also cause disruptions in the vehicle's on-board network. It should be borne in mind that if you want to install linzovannye headlights ("Kia-Rio" is no exception), you must also install the ignition units.
Professionals recommend using special washers along with such optics. This light is very sensitive to dirt that accumulates on the surface of the lamp. Even slight dirt can significantly impair the flow of light.
The headlight in which xenon or bi-xenon is installed must be previously adapted for the installation of such a light source. Reflectors and reflectors mount those that correspond to xenon. In general, xenon can only be used with lenses. Also, it will not be superfluous to install an
automatic corrector for lighting.
Conclusion
Practice shows that unprofessional installation can lead to too bright or, conversely, too dim light. Therefore, it is better to entrust the installation to professionals. Also a good and competent approach is the installation of standard optics from more expensive trim levels. You can use an analogue in brightness and efficiency - LED lensed headlights.