Many car owners use vinyl foil to protect the machine’s paintwork. If necessary, this material can be glued onto the vehicle body. The main thing is compliance with all the rules.
How much film do you need
Pasting vinyl cars - the process is simple. However, it is important to correctly calculate the amount of material. In this case, some nuances should be taken into account, for example, the type of film and the type of body. Of particular importance is the experience of the master. If you are a beginner, then it is better to take more material, since flaws and errors are not ruled out.
Do not forget that vinyl film can have individual characteristics, among which it is necessary to highlight elastic and strong stretching. For this reason, specialists give the following material calculations:
- For pasting an SUV requires 23-30 meters of film.
- For the crossover - 18-23 meters.
- For a sedan - 17-19 meters.
Of course, this data is relative. However, thanks to them, the car owner has an approximate idea of how much material you need to buy. If pasting vinyl cars you can not afford, then you should seek help from specialized salons. Here you will be helped to choose the material and apply it to the vehicle body.
Is it possible to paste a car on my own
Pasting a car with vinyl with your own hands requires accuracy. This is currently the most popular way to transform a vehicle. In fact, working with vinyl is very simple and easy. Due to this, the material can be applied to the car body yourself. In just a day, you can completely change the appearance of the car. In this way, you can give the body any color, apply the original pattern or ornament. Also, vinyl film allows you to place your own company’s mobile advertising on a vehicle.
Technology
Pasting with a vinyl car has many advantages, but the most important thing is the convenience and simplicity of applying the material. At the moment, several basic technologies are distinguished - wet and dry.
The latter method is the most difficult. Dry pasting of cars with vinyl with their own hands should be carried out using special tools. Such work requires prior training and experience. It is worth considering that the film adheres to a dry surface much faster, and therefore it is almost impossible to smooth wrinkles after application. For this reason, gluing in a dry way is best done in a specialized salon. The main advantage of this method is that vinyl is applied only once and serves for a long time.
Wet pasting with vinyl cars is much easier. It is much easier to apply the film to pre-wetted vehicle parts than to dry ones. At any time, the material can be removed and transferred to another place. The main disadvantage of this method is the likelihood of water accumulating under the film after completion of work. Of course, after complete drying, the moisture will evaporate, but ugly bubbles may form in its place. However, wet sticking vinyl with your own hands avoids grosser mistakes.
What you need for work
Before you begin, you need to prepare tools for pasting cars with vinyl. For work you may need:
- Masking tape.
- White spirit or alcohol.
- Spray bottle and soap solution.
- Professional hair dryer.
- Clerical knife or scissors.
- Felt or plastic squeegee.
Preparation and getting started
If you are not confident in your own abilities, then you can go through training in car pasting with vinyl. Before starting work, it is necessary to prepare the vehicle. Car surfaces must be carefully polished. In this case, you must immediately remove all the bumps. In addition, it is worth degreasing more complex areas of the passenger compartment and body. Finally, wipe each corner of the vehicle thoroughly with a dry cloth. After preparation, you can start applying the film.
Pasting a car vinyl takes place in several stages. In the process, it is required to take into account some nuances. Start gluing is the smallest radius across the surface. This step allows you to stretch the film throughout the body without squeezing it. The abilities of the material should also be considered. Vinyl stretches by about 30-50%, and shrinks only by 10%.
After the film is stretched over the entire surface, you can begin to heat it. In this case, the temperature should not be more than 70 ° C. Otherwise, the material can not only lose color, but even collapse.
How to glue
So, how does car wrapping with vinyl take place? Reviews indicate that the material should be applied in one piece to each part of the vehicle. In this case, the film must be laid on a pre-prepared and uniform surface. If it is necessary to make several pieces of vinyl, then experts recommend making a small overlap of one layer on the second. This will protect the canvas from getting under it air and moisture.
If it is necessary to glue over coarser surfaces and complex shapes, then gluing the corners of the hanging material should not be allowed. It is very difficult to tear without causing damage and without tearing. It is for this reason that professionals recommend treating the surface with adhesive with special solutions.
After the vinyl is pasted, experts do not recommend using the vehicle. The film should dry well. It takes about 10 days.
Troubleshooting
What to do if pasting with a vinyl car was not entirely successful? When applying material on the surface of the body, air must not be allowed to enter under the canvas, as well as its strong stretching. If you could not avoid such errors, then gently press the vinyl with a damp cloth, and then walk through the dangerous area with a stream of hot air. As a result, the film shrinks slightly. This will eliminate the defect.
Right advice
The easiest way to update the surface of the body is pasting the car with vinyl. The photos of the vehicle presented in the review confirm this. However, in the process of applying the film, many make mistakes.
Basic Rules:
- The vehicle must be washed and degreased before gluing. Many car owners believe that this is completely unnecessary.
- The body must be wiped.
- If the canvas is large, then you should ask for help. Gluing a film alone is not so simple.
- The film cannot be glued without first fitting. Before tearing the mounting and removing the substrate, the material should be tried on the part.
- The substrate should be removed immediately before gluing the part. Do not wet it with water.
- Roll up the squeegee material from the middle of the canvas to its edges.
- When working with vinyl, you need to heat it with a special hairdryer. The temperature of the air flow should be no more than 70 ° C.
- After pasting, all treated surfaces should be dried with warm air. Fully vinyl will stick only 10 days after application. During this period, you should not drive a car.
If you are not confident in your own abilities, then the work should be entrusted to experienced craftsmen from the salon. Otherwise, ghost savings can result in additional costs. After all, pasting a vehicle with vinyl is an art.